Mosfet:Lipo Peotection, gotta love cyma and their chinglish. I didn't buy one of these as the Lipo battery is wired in, dont know why they just didnt only put a mosfet in these.
@@im_your_dad165 if you dissasemble it far enough the battery is replacable right? i ordered one with a spare battery specifically for replacement in the field...
Hiya. The range is quite as good as a normal AEG, it gets about 3 quarters of the range of my normal gun. But with a hop rubber and a tight bore people are seeking to match or exceed the range of their standard guns. As for battery I couldn't honestly say how many rounds I could fire off. In my Glock AEP I have fired off about 7 long mags (100round mags) in a day and it was still going strong at that point. I would expect at least 1000 rounds out of it as an absolute minimum. Pheas
@@redyn9611 Hiya. As long as you know before getting it that there is no kick back on it then it makes a very good starter pistol. It's consistent and a great runner and a great price to boot. I love AEPs and can't recommend them enough. Pheas
Can 2 standard 18650 li-ion batteries (same voltage) handle such pistol? I am thinking about baterry capacity upgrade and I have plenty of 18650 li-ion cells. I know I can put it inside, that's obvious, I think about making some imitation of laser and put it there.
@@PheasAirsoft I did some research and they are using li-pol for some reason, li-ion cells mostly can handle only something like 5A constant current, but li-pol can handle 4 times more and you need it for AS gun, so using li-ion (except some very expensive cells which are construced for high current) is probably not possible. But maybe some li-pol upgrade to fake laser under barrel is still good idea, I checked few AS shops and they have dozens of shapes so you can buy exact battery which you need. I will make something like Robocop pistol just for fun. I think that capacity of inside battery (around 500 mAh) is really ridiculous, it's loosing voltage fastly and you have long delay between pressing trigger and shot and I don't like that.
Is there a specific charger for it? I have a a charger it’s a C150 lipo charger but I don’t have a small deans to connect it too. Just the white part is that all you need to charge it ?
You can use the included usb lipo charger that is designed and built to charge the little lipo in there, but If your normal lipo charger can charge using just the white connector on the battery then It will charge it just fine. Hope that helps. Pheas
If it was a direct clone of a TM one I would say eagle 6 but as it's a cyma unique one you will need to find someone splitting one or buy a new one I'm afraid. Gutted for you! Pheas
Hiya, I will see if my friend still has this and show the rate of fire. Its never going to compare fully to a full auto AEG, but it will be snappy enough to be a good side arm, or a weapon of sneaking about and picking people off with the option to hose down a coupe of people. I have played with my Glock 18c AEP as a primary a couple of times and the full auto option has been enough to empty the mag in a couple of seconds (100 round mags) and took down a couple of guys with it. I will let you know if I can get hold of it. Pheas
![[UNBOXING] CYMA CM.123 M1911 AEP - FULL AUTO 1911 NON BLOWBACK](http://i.ytimg.com/vi/onQ_bxtjiJQ/mqdefault.jpg)
![[UNBOXING] CYMA CM.123 M1911 AEP - FULL AUTO 1911 NON BLOWBACK](/img/tr.png)
![[UNBOXING] DOUBLE EAGLE M89A UMP - BUDGET SMG](http://i.ytimg.com/vi/Ty0W1qQ951I/mqdefault.jpg)
The switch you state is to pop out the battery is actually the safe. Or at least in my case it is.
good overall assessment , never seen the inner works of a electric pistol before :
Mosfet:Lipo Peotection, gotta love cyma and their chinglish. I didn't buy one of these as the Lipo battery is wired in, dont know why they just didnt only put a mosfet in these.
M Severing not a lot of space to have a mechanism to get a battery in and out. My guess at least.
The battery is removable, but on certain models in the line don't have enough space to take it out. It's wired to ( I believe it's called) mini deans
@@im_your_dad165 if you dissasemble it far enough the battery is replacable right? i ordered one with a spare battery specifically for replacement in the field...
Nice vid my friend
"Ceema"! Thanks for a decent review mate.
how long does it take to fully charge from full dead
Hiya. I think its around an hour. the coloured light on the usb charger should go green, if i remember rightly, when its fully charged. Pheas
@@PheasAirsoft It's been 3 months now is it loaded yet?
Battery is removal, and you can buy spare batteries on Evike.com.
Can also get spare mags.
Hiya, In the newer models the battery is removable. In this one it is actually wired into the trigger block directly and non-removable. Pheas
Is that a normal picatinny rail or do i need a adapter to mount things on it?
Hiya, it is indeed a normal picatinny rail (20mm) no adapter needed here! Pheas
Pheas Airsoft Okay, thanks alot m8.
hi can i know range of this thing ? and also how many shots can you shoot with full bat?
Hiya. The range is quite as good as a normal AEG, it gets about 3 quarters of the range of my normal gun. But with a hop rubber and a tight bore people are seeking to match or exceed the range of their standard guns. As for battery I couldn't honestly say how many rounds I could fire off. In my Glock AEP I have fired off about 7 long mags (100round mags) in a day and it was still going strong at that point. I would expect at least 1000 rounds out of it as an absolute minimum. Pheas
@@PheasAirsoft thanks
@@PheasAirsoft is it good for starting if i am pistol guy ?
@@redyn9611 Hiya. As long as you know before getting it that there is no kick back on it then it makes a very good starter pistol. It's consistent and a great runner and a great price to boot. I love AEPs and can't recommend them enough. Pheas
@@PheasAirsoft is it something like cm 127S or it sbetter or worse ?
No shooting?
Unfortunately not, its one of the older style videos before I had space to do the shooting tests. Pheas
Can 2 standard 18650 li-ion batteries (same voltage) handle such pistol? I am thinking about baterry capacity upgrade and I have plenty of 18650 li-ion cells. I know I can put it inside, that's obvious, I think about making some imitation of laser and put it there.
I can't see why not. I would be interested to see what happens if you do attempt it. Pheas
@@PheasAirsoft I did some research and they are using li-pol for some reason, li-ion cells mostly can handle only something like 5A constant current, but li-pol can handle 4 times more and you need it for AS gun, so using li-ion (except some very expensive cells which are construced for high current) is probably not possible. But maybe some li-pol upgrade to fake laser under barrel is still good idea, I checked few AS shops and they have dozens of shapes so you can buy exact battery which you need. I will make something like Robocop pistol just for fun. I think that capacity of inside battery (around 500 mAh) is really ridiculous, it's loosing voltage fastly and you have long delay between pressing trigger and shot and I don't like that.
Do you know if it would fit a plastic holster specifically for a p226? 😊
Hello! I honestly couldn't tell you sorry! I seem to remember it being very very close to the size of a gbb p226 so would suspect yes. Pheas
Do you think its possible to attach a tracer to the pistol?
The end of the barrel isn’t threaded, so unfortunately no, unless you could do that yourself.
The thing in the middle in front of the select fire switch is the safety
Is there a specific charger for it? I have a a charger it’s a C150 lipo charger but I don’t have a small deans to connect it too. Just the white part is that all you need to charge it ?
You can use the included usb lipo charger that is designed and built to charge the little lipo in there, but If your normal lipo charger can charge using just the white connector on the battery then It will charge it just fine. Hope that helps. Pheas
I have a CM127s any idea how to put these batterys into storage mode. Keeping them fully charge is not good for Lipos
My slide broke [my fault] but do you know where i can get a replacement part?
If it was a direct clone of a TM one I would say eagle 6 but as it's a cyma unique one you will need to find someone splitting one or buy a new one I'm afraid. Gutted for you! Pheas
What website did you order from?
Taiwan airsoft
hi! Is it made of metal or plastic? Good video overall.
Hello! Glad you liked it. It's plastic mostly on the outside. The top slide was metal. Pheas
@@PheasAirsoft thanks. Maybe going to get one.
What is the rate of fire
Hiya, I will see if my friend still has this and show the rate of fire. Its never going to compare fully to a full auto AEG, but it will be snappy enough to be a good side arm, or a weapon of sneaking about and picking people off with the option to hose down a coupe of people. I have played with my Glock 18c AEP as a primary a couple of times and the full auto option has been enough to empty the mag in a couple of seconds (100 round mags) and took down a couple of guys with it. I will let you know if I can get hold of it. Pheas
@@PheasAirsoft thanks
This gun have blowback???
Hiya, this one doesn't have blowback, just a normal electric pistol. Pheas
Two and a half minutes of unnecessary box. The rest was fine.