@@Funkertruppen Naturally you won't have any extra hazard while the connectors are joined, but by having the exposed the male side of the connector to the battery you introduce a noticeable short-circuiting risk when outside of the airsoft gun. This is overall just very bad practice. I've never seen anyone do this blunder in my 11 years of playing and occasional meching airsoft.
нєияу It was pretty straight forward: Cut, screw and glue so it fits. The rail wont fit a cm.030 anymore and the cm.127 wont be able to have regular sights anymore.
Do exist railkits that are compatible with the Cyma cm 122 (The Sig P226 model), because after searching on internet websites from my country I couldn't actually find something.
what upgrades increase the power of the pistol? i bought a lipo like you, but what is better for more joules (energy) in the shots? a spring upgrade or a motor upgrade?
Can you please advice what type of barrel did u install? Do GBB pistons and AEP-s have the same barrel and hop up bucking? Couldnt find information on forum, some says u can get VSR inner barrel with hop up bucking and just shorten it.
Alexander Siniov Look in description for more info on the barrel. It is not the same as AEG barrels. Different fitting on barrel and rubber. I do not know if it's the same as GBB, maybe. Not the same as VSR.
I want to buy my first Airsoft, and am pretty sure I want the cyma cm127, but is it easy to exchange the batteries from nim-h to these lipo? I am not sure about how to connect the lipo to the weapon which came with nim.h batteries. is it the same way? same connectors? or do I have to mod the connectors? And is a mosfet a must? or should the gun work all fine without? cause I could buy one without mosfet and nim-h batteries for 68€ or one with lipo and mosfet which is called gen.2 for 99€
You have to mod the connectors to minideans or some other small connector. Mosfet is not recommended if you ask me. I get not noticeable difference. The gen 2(from begadi?) is fine then you don't need to mod the connectors yourself. If you are getting your first Airsoft gun then you really should start with and AEG instead of an AEP.
Hi mate, I’m very interested in motor replacement, you mentioned that rc motors will fit, do you have more info about it? I look for many but no one measures like original
Hi! I tried to order one a year ago but couldn't find one either. The process is also kinds tricky. You have to buy a motor with the same dimensions and then replace the shaft yourself (info from some forum post).
I recently got my hands on a CYMA 131S but I would really like to be able to use my ACETECH tracer on it but this pistol doesn't have a threaded muzzle. Has anyone seen any mods for the muzzle so you can attach tracers an such? I would rather not use the rail system shown in this video, never been a fan of having rails on the top of my pistols.
@@MeioHeyo I completely redesigned mine using a random metal outer barrel from another pistol and made it so I can take the entire slide off without removing the suppressor and I re-enforced parts of the battery compartment. It is very nice now.
Martin Gustafsson mosfet will not improve your shooting only protects the tiny metal contacts of trigger for the greater current passing through it because lipo high discharge rate
Now I've had feeding problems with the high caps. If you fill them up 100% then BBS can get stuck in the hop up chamber. Seems like the spring in the magazine is too powerful and forces bbs up into the hopup causing jams.
![[MODDING] [ HOWTO] CM.030 top rail and silencer](http://i.ytimg.com/vi/AKpEAksGAsg/mqdefault.jpg)
![[UNBOXING] CYMA CM.123 M1911 AEP - FULL AUTO 1911 NON BLOWBACK](/img/n.gif)
0:11 Shooting test
1:51 Lipo upgrade
3:20 Internal barrel
3:39 Spring and nozzle head
4:06 Magazines
4:25 External upgrades
6:09 Additional upgrades
7:01 Prioritized upgrades
8:20 Comparison between batteries
thank you for recording this video because thanks to you I managed to find the lock with the rail, thank you very much
Man your videos are awesome! You deserve much more attention!
Wow now wait a second, you have the wrong end of the dean's plug on your battery that's super dangerous
only if someone steals your replica and plug batteries incorrectly
@@Funkertruppen No, it means you can easily short-circuit the battery by something casually connecting the prongs. Not recommended.
@@turboepicgamedump7501 If I got soldered equally on battery side... NO
@@Funkertruppen Naturally you won't have any extra hazard while the connectors are joined, but by having the exposed the male side of the connector to the battery you introduce a noticeable short-circuiting risk when outside of the airsoft gun. This is overall just very bad practice. I've never seen anyone do this blunder in my 11 years of playing and occasional meching airsoft.
Thank You for the video, How much did it cost for the upgrades? Do you know what kind of range you are getting now? Regards Dale
I've seen you mention a spring upgrade several times over a coupel videos but never which one or where from.
Care to share that info?
lite sent men vart fick du tag i alla uppgraderingsdelar? Vad är det för delar? söker man efter pistolfjädrar eller?
Can you do a video on how to attached the cm030 rail kit to this ?
Well it's pretty simple. Unscrew the iron sights and glue and screw the rail on top.
Can you make a tutorial on how to mount the rail?
нєияу It was pretty straight forward: Cut, screw and glue so it fits. The rail wont fit a cm.030 anymore and the cm.127 wont be able to have regular sights anymore.
@@BarbaraPappaAirsoft A little more detail (maybe as a video) would be appreciated! For example, what glue did you use?
Martin Gustafsson please more details
flanery how do You do The Rail on the cm?
@@Kaijit-op2lv I have no clue. A video about it would be so cool!
Thanks for posting all the links, shame you couldn't chrono it in the video
If you're not about about blowback that's a very nice budget Secondary
The mag stick out that far?!
Do exist railkits that are compatible with the Cyma cm 122 (The Sig P226 model), because after searching on internet websites from my country I couldn't actually find something.
Alexandru Folea Nö sorry
what upgrades increase the power of the pistol? i bought a lipo like you, but what is better for more joules (energy) in the shots? a spring upgrade or a motor upgrade?
A motor upgrade doesnt give you more energy (joules). You will need a better spring or parts with better air seal (e.g. piston head)
Great video where did you get all the upgrades form rail and silencer etc thanks
Young and old Airsoft I got it from local Swedish shops. Should be easy to find only tough
I don't get why noone changes the motor
How is it holding up without mosfet? do you have problems with trigger contacts?
It's fine without a mosfet.
No problems.
What is your glock holster? where did you buy
Could you share which spring you upgraded to? And also, you didn't touch the hop up bucking.. why?
Did you change out the plastic bearings in the gearbox to support the stronger spring ?
No
Do u have a holster for it? I have a hard time finding one that fits well.
The "taurus" holsters should fit according to some reviews online but I have not tried it.
Can you please advice what type of barrel did u install? Do GBB pistons and AEP-s have the same barrel and hop up bucking? Couldnt find information on forum, some says u can get VSR inner barrel with hop up bucking and just shorten it.
Alexander Siniov Look in description for more info on the barrel.
It is not the same as AEG barrels. Different fitting on barrel and rubber. I do not know if it's the same as GBB, maybe. Not the same as VSR.
I want to buy my first Airsoft, and am pretty sure I want the cyma cm127, but is it easy to exchange the batteries from nim-h to these lipo? I am not sure about how to connect the lipo to the weapon which came with nim.h batteries. is it the same way? same connectors? or do I have to mod the connectors? And is a mosfet a must? or should the gun work all fine without? cause I could buy one without mosfet and nim-h batteries for 68€ or one with lipo and mosfet which is called gen.2 for 99€
You have to mod the connectors to minideans or some other small connector.
Mosfet is not recommended if you ask me. I get not noticeable difference.
The gen 2(from begadi?) is fine then you don't need to mod the connectors yourself.
If you are getting your first Airsoft gun then you really should start with and AEG instead of an AEP.
Where did you get the spring from?
This kit is suitable for cyma 125 (usp)?
thank
Sorry i Don't speek English
Yes I think so
Dumb question, what brand or moddle nozzle head did you replace the original with?
Lexolotl PDI piston head with 8 holes. Links to all upgrades are now in description.
Thank you.
Hi mate, I’m very interested in motor replacement, you mentioned that rc motors will fit, do you have more info about it? I look for many but no one measures like original
Hi! I tried to order one a year ago but couldn't find one either. The process is also kinds tricky. You have to buy a motor with the same dimensions and then replace the shaft yourself (info from some forum post).
Anyone have idea where to buy this batteries in eu ? Tnx!
holy shit i thought my headphones broke but it's just the shitty audio
What holster can be used with this gun?
I've heard that the "Taurus" pistols holsters will fit
I recently got my hands on a CYMA 131S but I would really like to be able to use my ACETECH tracer on it but this pistol doesn't have a threaded muzzle. Has anyone seen any mods for the muzzle so you can attach tracers an such? I would rather not use the rail system shown in this video, never been a fan of having rails on the top of my pistols.
I think there is a thing called Sound Supressor Adapter
@@MeioHeyo I completely redesigned mine using a random metal outer barrel from another pistol and made it so I can take the entire slide off without removing the suppressor and I re-enforced parts of the battery compartment. It is very nice now.
man, you should NEVER EVER(!) put open type MALE connectors on batteries. if some metal short it you will burn in hell.
Hi, Do you know if the Cm127 has the same gearbox as the cm125 or cm130?
- It's the same as the cm.030 which is the same as the TM original. Don't know about cm.125 tough.
What do I exactly need to have lipo upgrade installed?
You need to remove the holder for the original battery and solder on deans (or other preferred connector) onto the wires so it fits the lipo.
Search on TH-cam, there are many other good videos on how to do this.
how did u fit a 20mm rail red-dot on a 22mm weaverrail?
It's all the same width, standard for rails. Don't know if it's 20 or 22.
Szyna-ris link pls
this is standart cm030 ris on your aep?
Void Trixter Yes but I had to modify the rail and the slide
How did u put the rail on it ?
He answered to this just under his comment to Henry...
Is this the 2.gen cyma cm 127?
2nd gen? No it's not the begadis version with mosfet. I don't know why they call it second gen.... Just creates confusion.
how easy is it to replace the inner barrel? may u do a short guide for it?
Its easy. Follow other guides on how to take apart the gun and then take apart the hop up (1 screw) and replace barrel.
This model copy any real firearm model?
No, it's close to the Glock.
dude a mosfet costs like 50 cents
halbGefressen Link?
Do you mean building one yourself?
I did buy a mosfet "kit" from begadi (15euros) but did not get much improvement...
Martin Gustafsson mosfet will not improve your shooting only protects the tiny metal contacts of trigger for the greater current passing through it because lipo high discharge rate
Thank you, I thought it would improve ROF.
Why would the metal contacts take damage? The voltage isn't that crazy high?
do u have any feeding problems with the hc ?
Cem Müller No. They are a bit sensitive in the mag pouches tough. Ocationally they spray off a ray of bbs if you touch the "lips"
ty 4 ur answer
Dont overfeed them and they work fine. People tend to push to many BB´s inside, top part goes slightly apart and gun doesnt feed.
I feed them to the maximum and Ive had no such problems. Just try your mags and see.
Now I've had feeding problems with the high caps. If you fill them up 100% then BBS can get stuck in the hop up chamber.
Seems like the spring in the magazine is too powerful and forces bbs up into the hopup causing jams.