ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 30 ส.ค. 2022
- Looking for aftermarket bumpers for my Jeep XJ was beginning to look like an exercise in financial malfeasance. Bumpers that act as recovery points and have an integral winch mount can get real expensive. I didn't want to spend a ton of money on my clapped out XJ, so I found this on Amazon for about a tenth of the price of a similar name brand bumper. The only catch is you have to weld it together yourself. Not much of a catch if you have a welder though.
Patreon -
www.patreon.co...
PayPal -
www.paypal.com...
Amazon Affiliate Links
DIY Front Winch Bumper - amzn.to/3KeQxk0
Front and Rear DIY Bumper kit - amzn.to/3POQsVo
Etch Primer - amzn.to/3AlSZRg
Gloss Black Paint - amzn.to/3wpTXLi
Bed Liner paint - amzn.to/3AKsiaA
Gear I use
GoPro Hero 7 Black - amzn.to/2YpJEUU
GoPro Charger w/extra battery - amzn.to/3phSmTI
64GB Sandisk Extreme SD card - amzn.to/2UY7dlA
Puluz Aluminum Cage for GoPro - amzn.to/2HG6Jxw
Movo VXR10GY directional microphone - amzn.to/2TAc4YL
GoPro Microphone Adapter - amzn.to/2YpKgtG
Pop Voice Lavalier Mic - amzn.to/3i2R1KL
Anozer Flexible Tripod - amzn.to/3PuhXU6
Zomei Pro 0.42 wide angle lens for smartphones - amzn.to/2HI33LE
DJI Spark drone w/Remote - amzn.to/2Yq1g32
DJI Spark Drone w/Flymore option -amzn.to/2uCT7u9
mkdvojnqpfoivnoqerig-019834utpo134ngwrtin9248hg92
![เหนื่อยหน่อยนะ (SOMEONE LIKE ME) - GEMINI Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/M55XjfhbrNw/mqdefault.jpg)
The closed eye tack welds 🤣
I appreciate the video. Very good information and great instructions.
Watched 3 other videos about this bumper . Yours was the best man 🤘🔥🤘🔥🤘🇺🇸🇺🇸🇺🇸
thank you!
Great information/video on these kits! Thank you 🙏🏼
Great! I’m using this one to put mine together! Very informative and a likeable guy!
If I seen it with out the video I don't think you could tell that it was a kit bumper, you did a great job on both bumpers. Be safe, hope that everyone is doing well...
Bedliner hides a lot of sin!
@@dzlfreek That is true. I still think you did a great job, be safe and hope the family is all doing well.
@@55ATA3 thank you sir
Hey Rick! Front bumper lookin’ good! Nice that you start at 8am (saw your watch!) due to our Texas heat. We’re finally getting some relief here in Houston with all the rain we didn’t get during the drought…hope y’all are getting some, too. Stay safe! ~Jim~
little bit of rain. Enough to turn my front yard into a hayfield
@@dzlfreek > Not to worry…you have your $25 lawn mower to remedy that! 😂😂😂. I’m glad y’all are finally getting rain…be prepared to get much more, as, I’m sending it your way!
Hey Rick
I enjoy your videos, humour and tunes. My 2001 Jeep XJ will be coming in my garage for the winter to do some work on it. Maybe I'll add a couple bumpers to the list.
Thanks
sounds like a plan
I ordered one of these..hope I can make it fit..I have frame stifners on the front.
I don’t think I could do as good a job, but kudos for your work.
a grinder and a flap disc fixes ugly welds.
A grinder makes anyone a welder. You did a good.
Napa has the best etching primer. Hey get yourself some torch glasses so you don’t burn your eyes out. The only thing I’m not liking about these bumpers is how far past the front they stick out. Other than that you did a great job your welds look very good.
thanks!
The bumper kits seem to be real good products.
Mounting points could be beefier, but for the money, I cant complain
I hat kind of welder do you have? Thanks for sharing this!
Enjoyed it and learned from it.
I ordered the front and rear kits through ebay . ✌️👍
nice job, bumper looks good
Thank you!
seen you on the XJ jeeps group. good video.
thanks
Nice work man!
thank you
Have you had a chance to pull on it at all? Im worried it might warp pretty bad especially with off center pulls?
I pulled a small tree out of my front yard with it. Pulled the truck over the curb before the roots gave up. I’m not that concerned
Hey Rick, question you remember which one you got off Amazon? Reason for asking actually like the look of the front and rear Ines you got and wanna make sure I don't get some weird looking one
links are in the description, my friend
I dig the music playing when you were working on your vacuum line, what was that? Thanks, God bless!
called "Double you" found on TH-cams audio library
@@dzlfreek Thanks
Badass 🤘
Thanks for making this video. I’ve been wanting to build one of these but was put off by the fact there’s no instructions! Are you happy with the finished product?
You should get some welding magnets to hold everything in place. It’s like having another pair of hands.
I find that the repairs that I dread the most aren't that big of a deal at all. wrench away, my friend
For what it is, Im satisfied. However I am going to add some metal to the mount brackets. 3/16 seem thin to me. Magnets would help, but then so would a good work bench.
@@dzlfreek thanks mate, I think I’ll just buy one and give it a crack. I like the look of the finished product. Cheers from Tasmania.
I have that exact welder what were your settings on the welder ?
290 ipm wire speed 19.5 volts and 6 for inductance
i hate these kinds of videos because my bumper did not come off that easy. neither did the mounting brackets hours of trying to remove the bumper
you live in the rust belt? I feel your pain.
@@dzlfreek Indiana so kinda yea but the jeep lived up north for most of it live so.