Jeep Cherokee XJ - DIY Front Bumper Build Episode: 9
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2023
- Are pre fabricated bumpers any good? I’ve always wanted test my skills and abilities with this fab kit so In this video I will be sharing how I built my $140 Amazon.com pre fab front bumper for my 1987 jeep Cherokee XJ.
With steel getting ridiculously overpriced, I bought this kit knowing I could save time and money not having to pick up and cut out the pieces of steel myself, So getting this kit made a-lot of sense.
The challenge is to not cut anything on the jeep but to integrate this bumper into the stock one in the most simplest way possible. With some basic Tools and fab skills I think we made it happen. Let me know your thoughts on how you would do it?
Here are some links for the materials used in this video. Thanks for watching. 🍻
84-2001 Jeep Cherokee XJ
DIY bumper kit: amzn.to/3OKT8F0
Hardware I used:
1 9/16-12 x 3” bolts G8
1 9/16-12 x 3 1/4” bolt G8
2 9/16-12 lock nuts grade G8
4 7/16-14 x 1 1/4” bolts G8
4 7/16-14 nuts G8
4 7/16-14 lock washers G8
8 7/16 washers G8
2 14mm x 1.50 x 50mm bolts G8
Having trouble deciding on great quality , yet affordable winch?
Look no further OPENROAD is where to go.
openroad4wd.com/collections/h...
DISCLAIMER
Due to the factors out of control by ATEM OFFROAD, we cannot guarantee against improper use or unauthorized modifications of this information ATEM OFFROAD assumes no liability or responsibility for property damages or injuries incurred as a result of any information contained in this video. Use this information at your own risk . ATEM OFFROAD recommends safe practices when working on vehicles and or with tools seen in this video, any injury damage or loss that may result from improper use of these tools equipment or from the information contained in this video. Is the sole responsibility of the user and not ATEM OFFROAD. Be Safe
This video and description contains affiliate links which means if you click on one of these product links, I’ll receive a small commission. Thank you - แนวปฏิบัติและการใช้ชีวิต
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
Hats off to the Cherokee XJ for proving that it's a classic that continues to shine offroad.
Absolutely 💯 🍻
I did the same thing except with the winch bucket. I made the wings different though. I did not like how the wings angled up so I changed up the wings. I took what was suppose to be the front of the wings and used those for the top. The 1" bottom section I made the front and I welded them so the 1" section was parallel to the bottom of the winch bucket. This made the wings sit low and blend with the bumper well.
Looks great with the og bumper! Nice aggressive yet stock look! Chefs kiss
I have to agree haha came out better than I expected. Thanks for watching buddy 🍻
Looks good! Pretty slick incorporating it into the oem bumper. I like it 👌
It’s definitely a one of a kind bumper to say the least! It was a special request by the first owner of the jeep. Challenge was expected! Thanks for watching buddy 🍻
I've seen cheap bumpers with the recovery points torn off. That kit looks to be made of pretty thick steel. It came out looking good!
We shall see, this one could probably use a bit more reinforcement in some areas but for now 1/4” steel seems solid. Thanks for watching 🍻
Luv the welded beads sign of craftsmanship wouldn't grind them down either 👍👍👍👍👍
I was this close to grinding them too, glad I didn’t mostly because everyone els does. And your right Kinda gives it a signature look in a way. Thanks for watching buddy 🍻
Very good video 👍
Thank you it was a fun little diy project 🍻
I dig it bro, love how it looks.
The black on the grill looks great on that body colour too. ✌🏻✌🏻
Thanks bro, question is , is it legal in Australia?
@@ATEMOFFROAD Probably not ADR (Australian Design Rules) compliant for air bag models, however bumpers are generally overlooked anyway.
Good job ! 👍
Thanks I appreciate it 🍻
Nice work. You'll want to keep an eye on that fairlead, though. The steel from the eyelet of the rope and the hook can gouge the aluminum fairlead and lead to a failure of the synthetic rope.
Great tip something I’ll definitely keep an eye out for hate to ruin my rope on something simple as a burr. Once I get the d rings I’ll attach the clevis hook to there! 🍻
Such a great informative video onaking a pre fab bumper. I have been looking at these on Ebay there are heaps here in Australia. I have a good mig but im only a beginner when it comes to welding.. would love one on my XJ.
They are pretty stout bumpers if you can get one on eBay it’s worth the savings on steel and time to cut out the steel on your own. It’s a nice looking bumper for 140 to say the least hey 👋 🍻
nice video ..
Thank you 🍻
Hola brother, podrías facilitar los planos, thanks
Love your mod,sir. We would like to invite you to do a review video for our pod lights. Is there a way to write you an email?