Nice build,I think you should add disc brakes to it lot easier to work on. I like the way you set up the drive train,with all the accessories.Can’t wait to see it finished.
Nice job - I need you help . I am doing the same engine and transmission also Dana 18 tc and a warn o/d . I am installing them in M38 . My question is #1 what engine mounts did you use to install the Buick engine? #2 how far back from the front cross member you installed the engine mounts? # 3 when you installed the novack adapter between the sm420 and the t case with the over drive did you have to take the OD off the t case . Or the transmission output shaft will slide in t case easy. Thank you and keep the good work
Thanks for the like , this set up does great around town and off road. #1 on the mounts I cut them off the cj5 frame I took the engine from. #2 on the location I’m going to have to get back to you I’ll measure tomorrow and send you the info. #3 I had everything separate from the beginning and I just put everything together. But I think the OD would need to be off to do the adaptation. Hope some of this helps 👍🏼
You prolly dont give a shit but if you guys are bored like me atm you can watch all the latest movies and series on Instaflixxer. I've been binge watching with my brother for the last couple of weeks =)
Creo y ya no los asen , pero si eran marca Rancho 2.5 “ de lift mas gue la originales. Gracias si me a salido muy bueno el jeep , muy bueno para andar en la sierra
@@patriciapayton1338 los ordene para un cj5 64 pero ordene 4 muelles traseras. Los de atras quedaron bien y las dos gue puse en frente tube gue modificar el chassis para gue quedaran. Use trasera para en frente para tener mas flexibilidas en la suspension Como son las largas suben y bajan mucho mas
Looks good! Keep on Jeepin'!!!!!!
👍🍀🧙♂️🍀👍!
Fantastic build -clean and professional. Looking forward to following along.
That’s going to be a really nice Flattie! You do great work, David! Can’t wait to wheel with you and your family again👍🏼
Tecovas Thanks Rick , my daughter named it Stitch the Disney carton. Sorry I think we are going to paint it blue like Gus
Dave, This is a NICE build! You did a great job with the video too. Looking forward to seeing it on the trail.
Looks good and you have some good ideas there. I'll be making a similar receiver hitch for my CJ3b soon. Thanks for sharing.
Just found this site and I am building a cj3b and considering a Dauntless or a 231 v6 out of a Buick. Glad to see this build, thanks
Nice , hope the video helps any questions feel free to ask , thanks
Nice build,I think you should add disc brakes to it lot easier to work on. I like the way you set up the drive train,with all the accessories.Can’t wait to see it finished.
Yes that’s the plan for the front I have a narrow Dana 30 that has disc brakes just need to get a locker for it
Super job! It was nice meeting you at cffc fall color tour.
Yes sir it was a blast thanks for the help with the carb problem. Hopefully we meet this year again 👍
@@grannylow7073
I sure hope so, there are a lot of submissions this year. Re the carb - Always glad to lend a hand. :)
@@davedegan12
Yes I seen that 🤞🏼
Freaking awesome build 👍
very very good job bro your great
Nice job - I need you help . I am doing the same engine and transmission also Dana 18 tc and a warn o/d . I am installing them in M38 . My question is #1 what engine mounts did you use to install the Buick engine? #2 how far back from the front cross member you installed the engine mounts? # 3 when you installed the novack adapter between the sm420 and the t case with the over drive did you have to take the OD off the t case . Or the transmission output shaft will slide in t case easy. Thank you and keep the good work
Thanks for the like , this set up does great around town and off road. #1 on the mounts I cut them off the cj5 frame I took the engine from. #2 on the location I’m going to have to get back to you I’ll measure tomorrow and send you the info. #3 I had everything separate from the beginning and I just put everything together. But I think the OD would need to be off to do the adaptation. Hope some of this helps 👍🏼
@@grannylow7073 thank you sir . That was very helpful
How much does such a build cost excluding the jeep chassis and body?...
Never really kept track of how much i was putting into it , but I would have to say near $8,000
Nice build
You prolly dont give a shit but if you guys are bored like me atm you can watch all the latest movies and series on Instaflixxer. I've been binge watching with my brother for the last couple of weeks =)
@Fletcher Marcos yea, I have been watching on InstaFlixxer for since november myself =)
muy bien amigo bien elaborado regalame la referencia o numero de parte de los muelles rancho y los shocks por favor gracias
Creo y ya no los asen , pero si eran marca Rancho 2.5 “ de lift mas gue la originales. Gracias si me a salido muy bueno el jeep , muy bueno para andar en la sierra
@@grannylow7073 para que tipo de jeep eran los ranchos porque estaban mas largos
@@patriciapayton1338 los ordene para un cj5 64 pero ordene 4 muelles traseras. Los de atras quedaron bien y las dos gue puse en frente tube gue modificar el chassis para gue quedaran. Use trasera para en frente para tener mas flexibilidas en la suspension Como son las largas suben y bajan mucho mas
Which material it's chassis made of
Just the bumpers and the front frame section passed the radiator crossmember, they are made 2x3 tubing 120 wall.
@@grannylow7073 ok thank
That engine looks to far back,.... ok you extended the frame
Perfect location , Watch the rest of the built
O