Custom Jeep Chassis Built In 2 Days!
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2024
- In this installment of Bachmann’s Garage, my instructor and I build a CJ-5 frame from scratch in two days. Under threat of losing the shop, the pressure was on!
This video is not a “how-to” and I wouldn’t cut your own frame asunder from the inspiration in this video, but I do hope you glean some entertainment from it. - ยานยนต์และพาหนะ
I like how the guy filming has welding gloves but the guy welding doesn't.
One of the most common upgrades we did to Jeeps - or any similar chassis - was to swap the front spring hangers, so the solid pivot was in the front and the shackle was in the rear.
Good to know, thanks!
Is it just me or are you the joker from Batman?
Which movie/joker are we talking? Jack Nicholson is my personal favorite.
ทวีปยุโรปไม้เนื้อดำแข็งเนื้อแดงดี
Awesome vid Sam. The buyer of that Jeep is gonna be happy w/the upgrade.😎
Only thing I'd add is a few small diameter 'drain' holes in the bottom of the frame and spray in some 'cavity wax' to hold off the ol' rustolation for a good bit longer.
For sure! We are going to drill the holes for the motor mounts, cap off the ends of the rails, make some drain holes at lower points in the frame, and use 3M Cavity Wax. Oh, and then some black paint!
Needs fishplates at the welded but joints
ไม้เนื้อแข็งทำรถยนต์ได้
Most definitely think and never do! Nice job,kinda junkie shop lol
Ese chasis no tiene torcion es todo rígido . Se van a fisurar las soldaduras
Los chasis de toyota tambien son tubulares, trabajan menos
Nothing wrong with that frame ......butchers,,,,
That's what I was thinking. Looked mint compared to the frames here in new england!
My 98 and my 86 jeep both frames are shot,,, I would kill to have a jeep frame thrat nice ,,,,,