You just saved me so much money. Was thinking about this for my (lowered on stock bolts) '17Z06, but wow, that is way too low, I drive my car everywhere. Thanks, sir!💥🙏🏾💥
This info was spot on bro! I was seriously considering doing the ZR1 front on my Z06, but even with my Stage 3 front, I can barely get out of my driveway (and I’m on stock suspension). Thanks for saving my pockets!
I was really thinking about doing this to my torch red Z51 convertible. It looks cool, but I thought it might be too low. You confirmed it. Thanks for doing this video.
Bro how did you fit the fender liner and the engine cover to the bumper? I have this space around like 2 to 3 inches away from the bumper my engine cover doesn’t reach
Hey brother, thanks for the video. What if you're sitting at C7 Stingray (non Z51/Z06) ride height. How do you feel about this bumper at that normal ride height?
I put the ZR1 Conversion Kit on my Z51. Yes, it's gorgeous. However at 138 mph in the cold, what I call the conversion piece shattered. They give you a cheap thin plastic piece that lines up with the corners, ties into the ZR1 Bumper and then holds up the lower air deflector. This little thin piece of plastic is the only thing holding up the lower air dam and the enormous pressure is to much for it to handle. NOW, Guess what? They don't sell parts! You can find the splitter on Ebay and that's it. I was able to salvage the passenger side corner piece. I got a quote from a 3D printer to make the part and they wanted almost $4,000. I asked my supplier if they could even trace it out for me. NO WAY. No matter how cool this looks--do not buy it. I am trying to make a mold out of plywood and balsa wood to make a fiberglass piece.
Thanks for watching. Yes, you understand out the box there is no support for the lip. Now you can buy them on EBAY, but years later and you are right, they will not sell you parts. Over all looked great, but no way. This is why I took it off.
I know this might come as a surprise and hurt feels..but I really do wish they could make it *harder* to use upbadged parts on the pleb examples. You help ruin the allure and exclusively of the zr1 nameplate when you slap parts and aero bits on a z51 and lower.
You just saved me so much money. Was thinking about this for my (lowered on stock bolts) '17Z06, but wow, that is way too low, I drive my car everywhere. Thanks, sir!💥🙏🏾💥
Thanks for watching
This info was spot on bro!
I was seriously considering doing the ZR1 front on my Z06, but even with my Stage 3 front, I can barely get out of my driveway (and I’m on stock suspension). Thanks for saving my pockets!
Happy to help
Just curious , the clips on top of the bumper by each headlight , what was your method to release those clips ?
Thank you so much for the valuable information. You really helped me make a decision and saved me a lot of money and headaches....
Glad I could help!. Thanks for watching.
I was really thinking about doing this to my torch red Z51 convertible. It looks cool, but I thought it might be too low. You confirmed it. Thanks for doing this video.
Thanks for watching
Thank you! Saved me time, money, and resources.
Glad it helped! thanks for watching
it's very low bumper I don't advice to buy it.. it will break eventually!!! I got it on my c7 and now I can't drive it around !!!
correct. thanks for watching.
Super happy I watched this
Thanks for watching.
Thanks for information, I was considering it to pair it up with new vr wing...
Thanks for watching
Thanks. I was considering doing it on my z06 till I found this
Nope. Thanks for watching.
What if you just take the lip off of it. Would you get more clearance?
Yes, but why would you do that? Thanks for watching.
So u don’t have to deal with tha scrapping every day 🥴
Bro if you don't install the black spoiler diveplane below the bumper will that give more clearance?
yes, but its wont be complete. thanks for watching.
I am having a bit of trouble getting the under tray good on my c7 zo6.
My advice is go back to stock. Thanks
For watching
I have it on now and I like it a lot@@TheSpeedBug
Will the front lip do just fine without the zr1 bumper?
Ewww. Thanks for watching
Bro how did you fit the fender liner and the engine cover to the bumper? I have this space around like 2 to 3 inches away from the bumper my engine cover doesn’t reach
I threw it in the garbage. It was a shit kit as you can see. Do yourself a favor and throw it away and buy your oem one.
Hey brother, thanks for the video. What if you're sitting at C7 Stingray (non Z51/Z06) ride height. How do you feel about this bumper at that normal ride height?
Thanks for watching. It will still hit stuff from time to time. Its low.
@@TheSpeedBug appreciate the response! By the way, on their website there's a picture of it without the splitter, like it's two pieces...
It is too low, you will scrape everything
great video friend, what kind of gopro are you using? it looks really crisp
Hero 7 Black. Thanks for watching.
I like mine at stock height. It looks a little cooler lowered, but its just not functional to me. I want to drive my corvette.
Smart man, thanks for watching
Is it possible to install without splitter to increase ground clearance?
Good luck, thanks for watching.
What size wheels and tires do you you have?
Stock size, thanks for watching
I put the ZR1 Conversion Kit on my Z51. Yes, it's gorgeous. However at 138 mph in the cold, what I call the conversion piece shattered. They give you a cheap thin plastic piece that lines up with the corners, ties into the ZR1 Bumper and then holds up the lower air deflector. This little thin piece of plastic is the only thing holding up the lower air dam and the enormous pressure is to much for it to handle. NOW, Guess what? They don't sell parts! You can find the splitter on Ebay and that's it. I was able to salvage the passenger side corner piece. I got a quote from a 3D printer to make the part and they wanted almost $4,000. I asked my supplier if they could even trace it out for me. NO WAY. No matter how cool this looks--do not buy it. I am trying to make a mold out of plywood and balsa wood to make a fiberglass piece.
Thanks for watching. Yes, you understand out the box there is no support for the lip. Now you can buy them on EBAY, but years later and you are right, they will not sell you parts. Over all looked great, but no way. This is why I took it off.
Is that bumper painted??
Yes, thanks for watching
Can’t you just run bigger wheels and cut the front fender ah bit so the wheel has clearance
Thats exactly what NOT to do. Thanks for watching.
@@TheSpeedBug Lmao
I know this might come as a surprise and hurt feels..but I really do wish they could make it *harder* to use upbadged parts on the pleb examples. You help ruin the allure and exclusively of the zr1 nameplate when you slap parts and aero bits on a z51 and lower.
Thanks for watching.
Get a HUGE set of Wheels!
Thanks for watching
The ZR1 has a stiffer suspension.
Thanks for watching
fuck I just bought this shit
Think twice about putting it on!
Did you return it or put it on?
Me too