I am about to do this but concerned about making pro active mods to the ground clearance in order to avoid this as an issue. Raising front etc and trimming splitter from underneath. Would love to see a video on that.
Hey Scott, I just finished my bumper install. Had to add a few screws and bolts but it came out great. My concern is the inch and a half clearance in front of each wheel. I can’t imagine what it’s like driving your car around out there. California roads are much better and I still Drag everywhere.
Hi Scott, Thanks for the comment. Yes it is very low and I ended up cutting some of the splitter off to gain some clearance. You may need to do the same thing. Again thanks for watching!!
@@THECORVETTECHANNEL looking to have this installed as well. Is the front splitter mandatory for the install? And which parts did you trim? I am at stock ride height.
@@Everpresnt No you dont have to install the Front Splitter, but it does look better if you do. Yes you may have to adjust the ride Height and as far as trimming take another look at the video and you can see the line that I chose on mine. Best of Luck !!! Thanks for watching!!
This looks awesome! Question I know the bumper comes primer, but does the grill, splitter, etc do they come carbon flash black from box or must paint that way?
Ok sorry for all the questions! I was just watching the speed bug’s video and he was saying on his conversion you’re going to spend at least $5000 to do this properly. But he’s not using the EOS bumper. Is that basically what it’s gonna cost to do this? I talk to my body shop here in town and they quoted me $750 Painted and installed. The bumper itself through EOS is $1,265.54 CND not excluding shipping Thanks again for your time
Good morning, great video - thanks. Question for you, just received the nose cover for my Z51, and I’m curious about the air pressure that will be building up in front of the wheelwells because the ZR1 vents will allow massive air flow vs Z51. I’ll be on track a lot at high speeds and curious if you’re aware of any mods, I might need to make to allow the air to escape that area.
Thanks for the info. Btw I was talking to Trino’s They were telling me your getting the ZR1 hood put on. Did you get the hood from ACS? They make a nice hood! Looking forward to seeing it!
Call me crazy but I think it would look nicer without the splitter. More cleaner looking. I can also put the splitter on if it looks to bare or like something is missing 🙂
Hi Cory... an while back I broke my splitter and had to take it off to get it repaired. I really didnt like it. it looked like it was missing something at least to me. if you didnt put it on you would not have any clearance issues. Good Luck!!
Scott, on the install of the ZR1 high wing conversion, the two side pieces for the wing seems to be two way taped. Its the last thing i need to do. Your instructions were amazing. Is that how you assembled the wing??? can you suggest a better adhesive??? Please and Thank You Scott
Hi Scott... when I got my Wing it was a Prototype per say and they had already attached the Wing caps on the wing so I did not know how it was attached. But Iater one of my wing caps got a little loose and so I took a close look and saw that it was 2 sided stick tape. So i removed the caps and the stick tape and went down to AutoZone and got some plastic 2 part epoxy. Then I drilled holes in the end of the wing and screwed some thread stock into the Wing Cap and then attached it that way. IT has been super tight ever since. Good Luck!!
@@scottrbryce439 no I used thread stock on the caps. If you pull all of the sticky tape off you will see 2 holes with threads then I drilled 2 holes in the end of the wing itself and filled the holes at the end of the wing with epoxy and then I inserted the thread stock in to the holes in the end of the wing
Thanks Scott for the video. I am about to do the same conversion to my GS. I am concerned about the EOS clearance of the splitter from the ground. A company rep said that it is 1.5 inches which seems unusually low. Is it lower than a stock ZR1? Also, I believe you raised the car in front by an inch on stock bolts? Are there any problems with that and what other specific components of the splitter can be modified or trimmed in order to get the clearance to 4 inches?
Great question... no I did not have to do anything I took it to the Body Shop in my Escalade and took the car down to the shop also so they could color match the paint.
Hey guys thanks for the great video! Does the front bumper fit well around the headlights and other body lines? In your video it didn't look like a perfect fit so just wondering
The bumper does have some issues as most aftermarket parts do, but for the most part I am very happy with it and would never go back to the stock bumper.
@@BuildNMotion IT does sit lower so I ended up having to cut some of the splitter off and raise the front end a little on the stock bolts. Not hard to do.
What's confusing to me is; the Z06 has a wider body, but this front nose says it fits the Stingray and the Z06. Are there any pictures showing this front nose on a Z06 or Grand Sport C7?
Good afternoon, I purchased and installed the ZR1 Conversion Kit. There are a few issues that I'm sure are easy fixes. Do you happen to have an email address that I could reach out to about these questions? If you don't mind that is. I will say that pain match is perfect very impressed.
@@betg1592 I will try to answer your questions as soon as I get some time. I had to deal with all of the issues you spoke about. do me a favor and email me your phone number so i can call you. It will be easier to talk
Hi Scott. Does this bumper fit right on perfectly without having to do a lot of modifications to it? I was watching this video a guy posted he had the Vicrez ZR1 bumper and he was saying it was a nightmare trying to get it on because nothing lined up properly and he was saying the bottom lip is such very bad quality that he busted off two or three of the bottom lips already going into his driveway.
Hello, As wish any aftermarket part there will be stuff that you find does not line up. Fortunately the top or outside parts line up pretty good.The problem areas are under the car where it all attaches. You will have make adjustments to the bolts holes and such take it fit. But it will fit just take your time. Now as far as the front splitter you will to cut off a lot of it to get your clearance back because the new bumper is almost 2 inches lower than the stock bumper. So the reason your friend has broke so many of them is because it is so low. I will try to do a video soon to cover what I had to do to fix these issues. But even though it has problems, I still love mine!!
Install video is great. But IMO this bumper is not very good on the Stingray. The rear looks even more narrow. The front clearance is less than the wheel gap and requires 4x4 mode to not kill the splitter. A lowered stock fascia with stage 1/2/3 aero is perfect looks-wise. For performance, I think the larger openings just allow turbulent air to get trapped inside the body instead of flowing around/through it properly like on a ZR1.
When I see a non ZR1 car with a ZR1 front bumper I think he’s smashed it up and that’s why he changed it. I would never consider doing that swap on my GS.
You produce good videos. However, when you state to reach out to you that is a lie! I have reached out with questions a few times and I am still waiting.
I would recommend that you buy the kit and then take to a body shop and have them paint it and install it. But if you want us to do it you would still need to have it painted and then bring it to us and would charge you between 500 and 800 depending on the condition of your car and the fitment.
@Bill A It's not a fake, it's about customizing and personal taste. It amazes me how everyone is an authority on how someone else spends their money. People are always going to customize their Corvettes. That's where the fun is.
@Bill A its not fake foo, these are actual parts for chevy corvettes not OEM but exact replicas. if you have 5.7 RT Challenger and put SRT red eye hood on it does that make it a fake red eye?
Hello, I am so sorry. I know they are low and I had to start using Curb Ramps to get into my drive way and I too hit something and it broke the Splitter and I had to have it repaired. I ended up doing two things. I cut some of the splitter off at the bottom and I also raised the front end of the car up to regain my clearance. I wish you the best of luck.
![เขามัทรี - เอ็กซ์ ศุภกฤต - จอนนี่มิวสิค [ Official MV ]](http://i.ytimg.com/vi/AS9ufKuQIVs/mqdefault.jpg)
Thanks to you guys for doing this video! I've had my zr1 bumper sitting for 4 months because I couldn't figure all of the pieces out.
Glad we could help!!
Good day; entertaining and informative video, and to add, the C7 looks awesome; take care.
Thanks, you too!
Hi Scott I watch videos over and over because I like the way you guys doing I want to do the same bumper in my car C7grand sport 3LT Great job👍
I am about to do this but concerned about making pro active mods to the ground clearance in order to avoid this as an issue. Raising front etc and trimming splitter from underneath. Would love to see a video on that.
They look very nice bumper and a job you guys doing together great job👍
Thanks 👍
Looks Killer, What a difference
She looks awesome
That was quite a project. Looks great Scott. ZR1 Wheels next?? Have a great 4th of July.
Thank you!! Happy 4th to you!!
a little boost would touch it off nice!!
I’ve got a black 2015 roadster, this would be a great upgrade
A great video as usual!
I appreciate that
Hey Scott, I just finished my bumper install. Had to add a few screws and bolts but it came out great. My concern is the inch and a half clearance in front of each wheel. I can’t imagine what it’s like driving your car around out there. California roads are much better and I still Drag everywhere.
Hi Scott,
Thanks for the comment.
Yes it is very low and I ended up cutting some of the splitter off to gain some clearance.
You may need to do the same thing.
Again thanks for watching!!
@@THECORVETTECHANNEL looking to have this installed as well. Is the front splitter mandatory for the install? And which parts did you trim? I am at stock ride height.
@@Everpresnt No you dont have to install the Front Splitter, but it does look better if you do. Yes you may have to adjust the ride Height and as far as trimming take another look at the video and you can see the line that I chose on mine. Best of Luck !!! Thanks for watching!!
it's very low bumper I don't advice to buy it.. it will break eventually!!! I have it on my car
Yes it is low but if you make the changes that are needed it works just fine
This looks awesome! Question I know the bumper comes primer, but does the grill, splitter, etc do they come carbon flash black from box or must paint that way?
It all has to painted everything is just primer
THE CORVETTE CHANNEL Perfect! Thanks for letting me know
Good job👍👍
Ok sorry for all the questions! I was just watching the speed bug’s video and he was saying on his conversion you’re going to spend at least $5000 to do this properly. But he’s not using the EOS bumper. Is that basically what it’s gonna cost to do this? I talk to my body shop here in town and they quoted me $750 Painted and installed. The bumper itself through EOS is $1,265.54 CND not excluding shipping
Thanks again for your time
That sounds about right what your body shop quoted you. Sounds like they are being fair with you.
Great Video. What was cost of painting And for the kit?
Good morning, great video - thanks. Question for you, just received the nose cover for my Z51, and I’m curious about the air pressure that will be building up in front of the wheelwells because the ZR1 vents will allow massive air flow vs Z51. I’ll be on track a lot at high speeds and curious if you’re aware of any mods, I might need to make to allow the air to escape that area.
Thanks for the info. Btw I was talking to Trino’s They were telling me your getting the ZR1 hood put on. Did you get the hood from ACS? They make a nice hood! Looking forward to seeing it!
Yes it is a ACS Hood!! Thanks for watching!!
Call me crazy but I think it would look nicer without the splitter. More cleaner looking. I can also put the splitter on if it looks to bare or like something is missing 🙂
Hi Cory... an while back I broke my splitter and had to take it off to get it repaired. I really didnt like it. it looked like it was missing something at least to me.
if you didnt put it on you would not have any clearance issues. Good Luck!!
hey guys how did you deal with the brake cooling ducts on the new bumper ?
Scott, on the install of the ZR1 high wing conversion, the two side pieces for the wing seems to be two way taped. Its the last thing i need to do. Your instructions were amazing. Is that how you assembled the wing??? can you suggest a better adhesive??? Please and Thank You
Scott
Hi Scott... when I got my Wing it was a Prototype per say and they had already attached the Wing caps on the wing so I did not know how it was attached. But Iater one of my wing caps got a little loose and so I took a close look and saw that it was 2 sided stick tape. So i removed the caps and the stick tape and went down to AutoZone and got some plastic 2 part epoxy. Then I drilled holes in the end of the wing and screwed some thread stock into the Wing Cap and then attached it that way. IT has been super tight ever since.
Good Luck!!
Did you drill all the way through the caps or just blind holes
@@scottrbryce439 no I used thread stock on the caps. If you pull all of the sticky tape off you will see 2 holes with threads then I drilled 2 holes in the end of the wing itself and filled the holes at the end of the wing with epoxy and then I inserted the thread stock in to the holes in the end of the wing
@@scottrbryce439 you don't see any screws on mine at all
@@THECORVETTECHANNEL thank you, you are awesome
Is there a video for side skirts
question does this conversion kit bring down the value of the vehicle. cause I'm really considering doing it.
Sorry i could not tell you.. All I can say is I LOVE mine.
It would be nice to see a better pix of the nose and not in the dark 😊
Thanks Scott for the video. I am about to do the same conversion to my GS. I am concerned about the EOS clearance of the splitter from the ground. A company rep said that it is 1.5 inches which seems unusually low. Is it lower than a stock ZR1? Also, I believe you raised the car in front by an inch on stock bolts? Are there any problems with that and what other specific components of the splitter can be modified or trimmed in order to get the clearance to 4 inches?
Yes raise the car on the stock bolts and you can cut almost an inch off the bottom of the splitter to gain back most of the clearance.
Did you have this fitted/altered at all before paiting? looks awesome!!
Great question... no I did not have to do anything I took it to the Body Shop in my Escalade and took the car down to the shop also so they could color match the paint.
@@THECORVETTECHANNEL WOW! and it fit pretty good around the headlights too
Great Video, How does the front brake cooling ducts mount?
The front ducts are already supported behind the grill there is no need to attach them to the grill.
THE CORVETTE CHANNEL That’s fantastic thank you
Hey how much did the paint cost?
The price will vary.
Is this using oem parts
Hey guys thanks for the great video! Does the front bumper fit well around the headlights and other body lines? In your video it didn't look like a perfect fit so just wondering
The bumper does have some issues as most aftermarket parts do, but for the most part I am very happy with it and would never go back to the stock bumper.
@@THECORVETTECHANNEL does it sit much lower to the ground? I've seen some videos that say it sits so low it scrapes everywhere
@@BuildNMotion IT does sit lower so I ended up having to cut some of the splitter off and raise the front end a little on the stock bolts. Not hard to do.
@@THECORVETTECHANNEL got it. So was it lowered beforehand on stock bolts? Btw just sent you a pm on FB
What's confusing to me is; the Z06 has a wider body, but this front nose says it fits the Stingray and the Z06. Are there any pictures showing this front nose on a Z06 or Grand Sport C7?
Good afternoon,
I purchased and installed the ZR1 Conversion Kit. There are a few issues that I'm sure are easy fixes. Do you happen to have an email address that I could reach out to about these questions? If you don't mind that is. I will say that pain match is perfect very impressed.
Sure..you can email us at thecorvettechannel@gmail.com
@@THECORVETTECHANNEL thank you so much emailing now
@@betg1592 I will try to answer your questions as soon as I get some time. I had to deal with all of the issues you spoke about. do me a favor and email me your phone number so i can call you. It will be easier to talk
@@THECORVETTECHANNEL yes sir emailing you now
Just done mine in the UK lots of trouble matching my velocity yellow edge to edge .
Hi Scott.
Does this bumper fit right on perfectly without having to do a lot of modifications to it? I was watching this video a guy posted he had the Vicrez ZR1 bumper and he was saying it was a nightmare trying to get it on because nothing lined up properly and he was saying the bottom lip is such very bad quality that he busted off two or three of the bottom lips already going into his driveway.
Hello,
As wish any aftermarket part there will be stuff that you find does not line up. Fortunately the top or outside parts line up pretty good.The problem areas are under the car where it all attaches. You will have make adjustments to the bolts holes and such take it fit. But it will fit just take your time.
Now as far as the front splitter you will to cut off a lot of it to get your clearance back because the new bumper is almost 2 inches lower than the stock bumper. So the reason your friend has broke so many of them is because it is so low. I will try to do a video soon to cover what I had to do to fix these issues. But even though it has problems, I still love mine!!
Are you gonna block the vents (back inside) on each side of the front bumper?
No you really cant see thru much at all. it looks good.
Install video is great. But IMO this bumper is not very good on the Stingray. The rear looks even more narrow. The front clearance is less than the wheel gap and requires 4x4 mode to not kill the splitter. A lowered stock fascia with stage 1/2/3 aero is perfect looks-wise. For performance, I think the larger openings just allow turbulent air to get trapped inside the body instead of flowing around/through it properly like on a ZR1.
hi scott was the charge for paint the parts custom paint if you don't my that at nice job
Is your body shop still able to do this conversion?
So you don't need to change your fenders or hood?
When I see a non ZR1 car with a ZR1 front bumper I think he’s smashed it up and that’s why he changed it. I would never consider doing that swap on my GS.
You produce good videos. However, when you state to reach out to you that is a lie! I have reached out with questions a few times and I am still waiting.
It looks great! How much does it cost to get a work like that on my C7? You can email me at: ranulfovillanueva@hotmail.com
I would recommend that you buy the kit and then take to a body shop and have them paint it and install it.
But if you want us to do it you would still need to have it painted and then bring it to us and would charge you between 500 and 800 depending on the condition of your car and the fitment.
I have not seen your comments or questions. What have you asked me?
Maybe some work under the hood? Little more race car, little less rice car
Lol ok!!
what is a color of your C7 ?
Crystal Red Metallic
I see two lower lip, do you have to paint them both?
Yes all of the parts have to be painted.
Put a widebody on it and a supercharge it.
A ZR-1 is $145,000.00 and I love the look I don't need 755 HP my car is fast enough.
@Bill A It's not a fake, it's about customizing and personal taste. It amazes me how everyone is an authority on how someone else spends their money. People are always going to customize their Corvettes. That's where the fun is.
Bill A that would be $10,000 for it, so no you wouldn’t be
@Bill A its not fake foo, these are actual parts for chevy corvettes not OEM but exact replicas. if you have 5.7 RT Challenger and put SRT red eye hood on it does that make it a fake red eye?
I installed the bumper on my Vette and it is so low to the ground that I cracked the bumper and put a whole in it leaving a parking lot
Hello, I am so sorry. I know they are low and I had to start using Curb Ramps to get into my drive way and I too hit something and it broke the Splitter and I had to have it repaired. I ended up doing two things. I cut some of the splitter off at the bottom and I also raised the front end of the car up to regain my clearance.
I wish you the best of luck.
It's a little much for a Stingray, with all the additions, you could have went with a GS upgrade.
Probably so if I was buying it from the get go. But the GS has the same front end as the Stingray. I love the look of the ZR-1 Front End
anyone tell me what is this blue thing？55:21
pneumatic pop rivet gun
paint aLMOST matches
Need a better view, shadows Don’t help