How to Setup and Install the Tormach 24R CNC Router
ฝัง
- เผยแพร่เมื่อ 12 ธ.ค. 2019
- Note: At 04:38 the rear of the controller shows an RGB connection. Those are no longer included and have been replaced with an HDMI connection. An HDMI cable is included with the new controller.
The setup of the Tormach 24R CNC Router is relatively straightforward. Since it's built with welded steel and an iron frame, it comes completely assembled. This is convenient for ease of setup, but you do have to take some things into consideration. Tormach recommends using a forklift to remove the 24R off of the shipping pallet. This is the quickest way to get it into your workshop. Because we know that not everyone has a forklift we also include a link to a separate video for an alternative method.
Before you setup your 24R CNC Router we recommend you download the Operators Manual and read through all the safety, electrical, site and tool requirements: www.tormach.com/support/wpdmp...
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/service...
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
Facebook: / tormach
Instagram: / tormach
Twitter: / tormach
LinkedIn: / tormach - วิทยาศาสตร์และเทคโนโลยี
The installation and setup look really straight forward. The solid base looks nice. Any details on setting up the vacuum table?
The 24R's vacuum table is designed for 2 ft. x 4 ft. spoil boards. It has 3 zones, with 6mm gaskets, and includes 6mm locating pins. The vacuum pump inlet is 1.25 in., and the 24R can be used with any vacuum pump of your choosing, but we offer a Storm Vacuum pump as an accessory: tormach.com/storm-vacuum-pump-for-24r-kit.html
Saving up for one of these now🔥
Any updates on when the servo upgrade kits will be available for series 3 machines. Don't forget about the people with the series 3 machines from not to long ago!!