Tinny mods | The ultimate fishing platform is the new Stessco Tripper.
ฝัง
- เผยแพร่เมื่อ 14 เม.ย. 2022
- The long awaited new tinny build is here. It’s a Stessco Tripper HS so the sides are higher and the gunnels are wider. Once it’s fit out with these mods, in my opinion it’s the ultimate fishing platform.
What do you need:
2 sheets of marine grade ply
10 m2 of marine carpet
3m of piano stainless steel hinge
Approx 6l of contact adhesive
4 compression locks
Pop Rivets approx 3.2mm x 9mm / 1 pack
Marine Sika Flex
Sika Flex 221
Pan head, metal screws 30mm / 50
Small countersunk screws for the piano hinges
Black spray paint for timber
Aluminium angle / approx 5 3m lengths
30mm x 30mm Box section aluminium / 1.2m
16 x 16mm aluminium channel / 2.4m
Foam 10mm x 6mm self adhesive sealant strip from Bunnings.
And I think that’s about it.
I hope this is helpful guys, get out there and enjoy it!
Forgot to add that the foam flooring was boat flooring from Emega Online. On EBay.
Hey mate cracking build. Should mount a solar panel under the lid of the gull wing door. Leave it open when driving. Or docked
A mate of mine has a big strip of black poly garden edge riveted around the front deck because he was tired of licking pliers and lipgrips over the front. It also catches a lot of wind and water whipping up over the front of the boat that you would otherwise catch in the face. Also costs next to nothing. Couple rivets, some silicone and the garden edging is all you need each time you need to replace it and he seems to get about 2 years out of it.
Hey mate how has the sea deck on the gunnels held up?
@@jordanalexander5202 amazing mate. Hasn’t peeled at all. 👌🏼
Mate well done on the build. The quality of the finish is fantastic.
Loving forward to the new season 🤙
Thanks mate. I’m kicking it off right now. In cairns and onto the Gulf tomorrow.
Congrats guys! It's been incredible how far your channel has come (and how quick)since the first episodes! So looking forward to season 6!
Thanks Craig. That’s inspiring mate
As a small boat owner, I appserlutly jealous of your work. Just awesome 👌 mate
Great job on the build!! So keen to see what this season has coming. Ill have to keep my eyes peeled for you on my travels around cape york and the Kimberley.
Yeah mate, make sure you say gday if you see me. 👍🏼
Been waiting for this one Nath! Awesome build, love the wide gunwales and storage space. Can't wait to see how she handles herself in Cape York! All the best and looking forward to the next one! Cheers
Me too Marshall. I’m about to put it all to the test!
you have got my attention the whole build, well done, you have put a seed of an idea, thank you
That’s good to hear 🤙🏼
Looks fantastic. Well done
Looks great mate..
Love your attention to detail.. makes a massive difference if you take pride in your work.. if only more people had a work ethic like yours..
Looking forward to Season 6.
Stay safe.
Thanks mate 🙏🏼, I agree the little things and the detail make all the difference
Love the build fellas, got me inspired to build my own !!
Looks awesome Nath...that's a great functional build.
Thanks Dave
Amazing build looking forward to some action from the boat.
Nice build. Can’t wait for the adventure to begin!!
Me either, it’s just about to!
Legit best content by far…. Can’t wait to see where you take the tin box👍🏻
Haha that’s awesome Kodie
Nice job mate, neat and functional
nice work mate i'm sure the next adventure in this little weapon will be EPIC!!
Another gr8 episode mate, congrats on an amazing job on the punt.
I'm really amazed why you haven't got triple the subs mate, your content is well worth watching and subscribing too.
Great job Nath and co👍👍
Thanks Brent, it will get there mate. I’m patient. 👍🏼
Jeez Nath, you've been bloody busy. The boat seems perfect. So much storage and room to move. And the trailer is tough as nails.
You shouldn't have any problems in the future with this set-up.
Have a great trip.
I hope not Craig, about to put it thru it’s paces 🤙🏼
Luv the build and the channel mate!!!!
Looking at a southern waters tinny build based on your build. Very similar with a few subtle differences. Some great ideas!! Awesome!!! Keep up the good work!!!👍👍
You boys deserve more than 1mil subs with the content you bring,
Keep up the work lads and bring back both boys soon 👌.
Thanks Mitchell 🙏🏼
Weapon tinny, can’t wait to build mine to take around aus with me! Definitely helped with some ideas
Good looking set up mate can’t wait to see your gear at work. Cheers
I’m nearly out bush
@@WildReaches Have a safe and happy Easter. 👍
You're a brilliant carpenter...and silka flex😂... man i sealed up my very old landrover with it.. crossed many flooded rivers upto window,s
Great to watch. One thing i have done differently is close up that gap between the floor and the rear seat. That gap for us always had stuff falling under the seat. We added a little panel down to the floor on the front side of the seat, allowing a small gap so water can easily flow thru, from the floor, but not knives, sinkers etc.
Yeah iv thought about that. I think I agree that should’ve been closed.
Awesome build!
🙏🏼 thankyou
wow mate you do some tidy work! Looking forward to season 6👌
Thanks Terry!
Happy Easter boys to you & yours
Thanks Jan, happy Easter to you!
Hey Nate great video ... and thanks Got my 'Palm Cockatoo" shirt other day and its awesome
You’re welcome Macka, thanks for buying one mate.
It's going to be a Good Friday with Wild Reaches.
Boat Builds 🤙
Cheers Nath
Haha enjoy Stevo!
Nice set up Mate.
Thanks Luke.
Can’t wait for the new episodes mate 👌🤘
I’ll be starting filming over the next couple of days. Looking forward to it!
@@WildReaches keen to see 👍
Good job 👍
Absolutely love this build 👌 I need a tinny like this haha
They’re such a good hull!
Got the notification - Just need a Tinny boat more time before I can watch 😂 pretty sure there’s an Easter egg for the next season in here too? Lol. Love wild reaches and sorry I’m reaching for bad puns here! Will be watching later tonight! Cheers
😂
Thats just perfect youve thought of everything and nailed it best tinny build ive seen love to see a yammy but a 30 3cyl 2 stroke would be pretty great on it👍
I imagine that would haul ass!
@@WildReaches yeah just weld some support on it i doubt youd need it but itll hold it no worrys
My fave channel, can't wait for the next series. 2:09, they are hanging in your tshirt neck lol
🙏🏼 thanks legend. Nah they’re my sons glasses
Nice work
Thanks Craig
@@WildReaches You find someone to go with you, I be up there somewhere for two months soon I only live up the Road at Cooroy
The ultimate big croc catching tinny !!!
😂
Great build video, some great ideas. I did a similar build last year but used 5083 grade 3mm Al plate for the floor, then covered it in 5mm Ultralon Z-tread, Al angle/RHS for deck frame. No wood, no dirty/wet/mouldy carpet. I did the stats and it worked out to be a similar weight to ply and a much more durable option, and not a heap more expensive. Let me know if you want some details/pics for your next build. Also curious to know if your gutter system works to keeps the hatches dry? Keep the vids coming, you're living the dream!
Awesome build mate! Some great ideas. Thanks for sharing.
Just be careful with that landing net. I lost a mates barra the first time we used his identical net. 2 days old. It thrashed and ripped a hole and swam straight out. Heart breaking.
Shit that would suck!!
@@WildReaches yeah it did haha. was in a barra comp as well
good ep mate, thinking of selling my brand new cc now after watching this and seeing if you can do a fitout on a tinny for me🤣🤣
Hahaha yours is epic too mate
Damn U did tidy job on your tinny fit out very cool bud
Thanks Troy 👍🏼
Great vid Thanks
You’re welcome!
What an absolute professional build Nath, I will be definitely copying your design when I get around to building my tinny. the only thing that I need to incorporate is a small side steering console as I have a very bad back and can't use a tiller steer outboard. I can't wait to see the next to episodes with the Quad bike and canopy review. Love your work mate.
Thankyou Roger, nice to know people are enjoying this stuff. Hope you’re well mate
Hey mate. You definitely need to seal the edges with sika, I’ve had issues where the parts I didn’t seal were shrinking and the glue separated from the foam. The edges that were sealed with sika have held tight.
It was about 6 months to see the issues.
The product is fine otherwise but needs the edge sealing.
Thanks mate. I thought it would
When you come to the Kimberley u need to go out to cape domett it’s about 120kms north of Kununurra where I’m from but it has to be in the dry season, definitely won’t get out there in the wet
My sister and brother in law lived up there for a few years, their mate lost his car at Cape Dommet, sounds like a pretty wild but amazing spot. I’ll put it on the list mate
@@WildReaches yeh oath I love it up there and the fishing goes off this time of the year but anyway I’m keen as to see the next season an love watching ur vids mate, just makes me wanna go fishing more everytime I watch them aha but nah keep it up brother
Impressive fit out for using Bunnings and RTM fittings with no welds. Done alot of boats and this is mint. Next time though go to an aluminium supplier for your angle. Bunnings is ridiculously expensive for that stuff. Sorry, you just pointed that out. 👍
Thanks mate. I always want to do these things in a way that all viewers can do too. Yep Bunnings is far too expensive for angle hey, blew me away
Genius....aluminium🙂
An Architectural Master Piece if I my say so.
Great build Nath
Bring on the new season
P.S. Do you need a Navi / Co-Pilot. Bugger, You'll be gone by the time I get there 😂
Haha thanks Stevo! I’d usually place a Patrol joke here but I don’t want to jinx my trip.
@@WildReaches
Nothing wrong with the GU🤙
Super excited to see where the new tinnie gets you boys... Bring on Season 6
Not long is Tony, teaser dropped today
Awesome build, looking at doing my own now. Just wondering how you get the rods in and out of the rod holders? I know it sounds dumb but i would like a demonstration to see if it would work with my tinny being slightly shorter.
even though this was not my thing.....watched it anyways.......BRING ON SEASONE 6........cant wait ♥
Haha thanks Jill
Without the wide gunnels, do you think you would need some sort of vertical support on the front deck? Looking to do somthing similar, just concerned that there might be too much flex without some sort of center vertical support - or is the middle horizontal support where you or the piano hinge strong enough?
What was the thickness off the aluminium angle you used cob?
Nice build - I went looking for pictures from my similar tinny build 15 years ago, but I seem to have lost them! (Have to build another one...)
I wonder how those compression locks will hold up to salt water? They might last better sprayed with a coating every now and then (Lanox or similar).
Love the channels - and I'd love to hear how effective they are at keeping the water out. That's always been the biggest challenge I've found with hatches made of plywood.
Michael
What thickness angle did you use in the front as support for the cast deck please ?
Hey mate just wondering why your boat has welded gunnel’s and that the new ones don’t is that something you added to it?
The tinny is sweet but that trailer is awesome.
It stole the show hey! Such an epic build
I forgot my mako sunnies
Not
Love ya work.
They’re my sons glasses on my shirt.
Did you use stainless steel hindges and screws ect? Also did you use sealed rivets or just standard open with plenty of sikka?
Ps ya got another subscriber 🤙
Great build. Can I ask the standard 3.79 tripper has a max HP of 20. Can you request the size of gunnels and height be increased to increase the max HP to 25 like you have done?
I think that’s the idea. Every dealer can access the new Tripper with the high sides.
Awesome vid, you mention it but never get back to it. How much did it cost?? Cheers
Awesome build love it! Can you buy the HS tripper yet? Had a look on the net but can’t find it, thinking about upgrading now haha
Yep, apparently every dealer can access them
@@WildReaches thanks for the reply I did find a couple thanks so much
Did you seal the marine ply before carpeting?
No I didn’t but never have in my boats and it seems to work fine. I think the glue acts as a seal.
Awesome content Nath as per normal! Mate what’s the total weight of the hull after the fit out?
I haven’t weighed it but I’d say around 150
Hey mate, not sure if I missed it on the video or not. How did you attach the upright bits of ply to the original seat. Cracking build BTW
Sika Flex and screws
Great clip 🙂. Where can I get one of your Anchors from?
You have to make them.
Hey Bruz, I’m looking at purchasing one of those exact boats to show my 4 year old the fishing camping world.
Would you agree the tripper is nice and stable?? Cheers Dan
100 percent mate. Such a stable good little boat.
I may have missed it but what length is she ? Love your work!
3.79 mate 👌🏼
Just wondering where you got your compression locks from?
Bunnings mate
Thank you, are they plastic or metal? At Wagga I've only seen similar catches in metal.
Sorry mate. Fly rod? You do so well with Lures you know and produce great fish! Introducing a Fly just a conduit full of pain. You could add a big GT rod instead 👍
Haha I love my fly fishing! But yes there will be a spot for the big popper slinger when I’m heading out to the reef in a glass out
Are you going to have a minn koda
Yeah I’d say so but not for this trip. Just the plonk.
i live in currimundi and i would love to go fishing with you
Probably a fuckin stupid question, but i dont know all too much about boats. That front seat on the bare hull. Is that a structural support in any way? Like, could you cut a hole out on the top and get a aluminium box made up and place it inside?
Yeah its structural so no not really unless you had it engineered
shit I just got a quote for the boat on trailer, wow 7 grand and I have to put a donk on it
Blimey Nath you could build one of these for Abramovich he has hit hard times !! We loved this very much, very interesting a lovely build mate. Did we hear you are going solo? Cor! if only you had our expertise from your training to fall back on 😚. Looking forward to your next adventure, we have got our lounge redecorated with a fire pit in the middle of the lounge!! Cheryl has purchased the girl's beginners guide to spiders and snakes her knowledge now is amazing, and the crocs are like pussy cats apparently😗. My back side still go like a buglers lip when I see one!! Love the quad and boat set up by the way looks very strong. Anyway looking forward to the next video...Take care your UK Leg Ends!!🍻🍻
Gday guys! Haha you should write a field guide to surviving the Australian Outback from a distance. I’d buy it! 😂 I hope you guys are well and getting ready for your trip down under. See you soon!
@@WildReaches Yes about the trip Octoberish! Now about the book.....😂
Wheres Dan, bring back Dan
He’ll be back!
Ya mako sunnies are on ya shirt lol
Nah they’re my sons cheapies
THE TINNY BUILD
don't forget the saftey chain or strap from the engine to the boat. . also u might need a hydrofoil SE sports 200 .. might make it handle more stable also .
ATOMIC SLIM TWITCH ... the one that got away .. it was this big !! √=====|°>
so all this extra wood flooring decking... battery system etc .. how heavier is the boat now from it's 85kg ? ~110kg ?
I cant believe it's only a 379!! the gunnels make it look so much bigger also i think . and where all the rib welds are !
would you still get a Bimini canopy ? for sun protection / sails ? or do you think it would interfer with your casting deck area and height ?
It doesn't look like there is any buoyancy in it lol
waffle