CUSTOM TINNY BUILD ~ DIY with listed items to use
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2024
- Wild Reaches custom tinny build of the Stessco Tripper HS. With higher sides, wider gunnels and this DIY custom fit out, in our opinion it's the ultimate fishing platform.
What you need to do the job; 2 sheets of marine grade ply, 10m2 of marine carpet, 3m of piano stainless steel hinge, approx 6l of contact adhesive, 4 compression locks, pop rivets approx 3.2mm x 9mm / 1 pack, marine sika flex, sika flex 221, pan head - metal screws 30mm/50, small countersunk screws for the piano hinges, black spray paint for timber, aluminium angle / approx 5 3m lengths, 30mm x 30mm box selection aluminium / 1.2m, 16 x 16mm aluminium channel / 2.4m, foam 10mm x 6mm self adhesive sealant strip from Bunnings.
If you have any questions let us know.
Trailer is 🔥
Tinnie is 🔥
Excellent design. Should have epoxy coated your timber, anyway probably get redesigned in a few years.
The decks that hold weight, if you put some 200g glass each face, you'd get much more load capacity out of the 9mm.
Good to hear your considering weight. PS don't trust build plate weights. The industry is unregulated and they lie.
Nice budget build
Remember, the basic floatation the boat came with would need upgrading. A boat that size would weigh about 350kg dry, 500kg wet motor, gear, fuel etc. So you'll need minimum 0.5m3 of PU foam in the floor. If the boats 800kg, then 0.8m3 or a bit more would stop it from hitting the ocean floor.
Awesome work mate 👏 Beautiful content and tinny 😊 thanks for sharing and a great episode 👍 appreciate it alot 😀 Greetings and cheers 🍻 mate from south africa 🇿🇦
Top build mate but as you know living up here in QLD we tend to go out rain ,hail or shine I always put a bilge pump in my boats when I fully enclose them like you have ,you would be surprised how much water could be in your boat after a down pour and if you’re punching thru swell at the same time you can find yourself in a pickle so for less than $100 it could save your life trust me it has saved me twice and you can’t put a price on your family and friends
Thanks for sharing mate. Iv since done this
Maaaate. A. i am a shipwright B. I spent heaps of time in Arnhemland, really similar country/ C. you are so on the money with the tinny. There are really good foams out there, supper strong, that would give you less weight up top, but all in all ... sweet
mate love the detail,,hey 1 thing those comprsn locks up front of the tinni,,,,,be carful with the sand and grime getting in the locks,,just a thought
You could even stick some automotive, sound insulation on the bottom side of your doors, etc.
Good video mate, get out and do some fishing, I’m curious though are you happy with the low transom
Cheers from down south
Hey mate love the build. Very intriguing video to watched loved every second keep up the work! ❤ I did have 1 question I’m look at a hull lime yours and was wondering how much brand new it coasted you just for the hull
I think you've done the tinny Build Justice mate What an epic little setup Did I still see the bonito boat in the background
Thanks Nevan. It’s such a ripper little boat, yep those Bonitos are good too
hey man wheres the post, love the content and where do you get the piano hinges from? love your tinnie its so well designed
Piano hinges from Bunnings, Road Tech Marine or Whitworths
Well! you have blown us away this week! Cheryl has gone to buy a new watch as she thought it was gaining to much time! 3 minutes along time she thought!🙄. If you think Bunning's is expensive you should try some of the equivalents here, when we are there we purchase and send home. hmmm! our neighbours shed is well stocked, and we know where the key is 😉. Anyway your boat looks great Nath, the quad looks a great bit of kit...Hope you can keep up with comments. Cheryl asks did she win a mini fan??? Back to work on our mini-sub now! Take care The Wild Screechers! HI Mel 👍
Hey mate, do you know anywhere I can purchase a Stessco tripper 379 HS
Pryml 3 pack 50mm 76cm COD.
👍🏽👍🏽