Wow finally someone who knows how to decently explain the installation to someone who has never used this glue before AND offer relevant advice! Thanks Soon much!!! I think you are Amazing!
Thank you for these awesome tips - had trouble figuring out how to connect that fine tip on my art glitterglue - afraid of damadging the plastic tip that the fine liner would sit on - very gratefull you posted this - so now im subbing to your channel with grattitude 🤗💖
You are so RIGHT about the GLUE it happen to me and o had the 2 and 8 ml. I think it might also be that the big glue bottle had cogs so started to take it apart to CLEAN IT GOOD and it did help. It was a pain but I like Glitter Glue alot🤗.❤ thank you for sharing.
Thanks for your review. Take a little plastic soda bottle, cut out the peace in the middle. than put the top and bot-em back on each other. After that put your Art Glitter bottle with pin faced down into the soda bottle. Sometimes you have to shake the bottle but it last for a very long time.
Thanks for sharing your applicator bottles, I prefer the scotch glue and have looked for quite sometime for an applicator alternative, excited to order them ... TY 😎
Thanks for the tips on the tips! I wonder if you keep your glue sitting up and place the pink plastic glue saver thing on top of the glue, if that would keep it from drying out? I have a different top to my AGG. It is more like the one that you purchased from Hobby Lobby. It is a pain trying to get that tiny pin into the tiny tip. It would be easier to place something like that pink cap down over the glue than to try to stick the pin into the tip. Thanks again!
Ooo why not maje your own dangle, if you take the beads off the others, link them together and attach them to a stud butterfly back and slide it on the pin.
I bought the fine tip and stainless steel needle, and the needle is to thick for the tip. I have to use a wire to unclog it. It's a pain. Thank you for telling us about the fineliner.💙
@@peggiestafford4169 I’ve followed instructions to the T and nothing worked, I Macgyver my way through every conceivable way with tips, hacks and different configurations. I gave up in the end and purchased some small tip bottles, it’s easy, no mess or fuss I just wish the bottles were bigger. Thank for you reply 👍🙏
Wow finally someone who knows how to decently explain the installation to someone who has never used this glue before AND offer relevant advice! Thanks Soon much!!! I think you are Amazing!
You’re welcome Gisela 🥰!
Thank you for these awesome tips - had trouble figuring out how to connect that fine tip on my art glitterglue - afraid of damadging the plastic tip that the fine liner would sit on - very gratefull you posted this - so now im subbing to your channel with grattitude 🤗💖
You are so RIGHT about the GLUE it happen to me and o had the 2 and 8 ml. I think it might also be that the big glue bottle had cogs so started to take it apart to CLEAN IT GOOD and it did help. It was a pain but I like Glitter Glue alot🤗.❤ thank you for sharing.
Thanks for your review. Take a little plastic soda bottle, cut out the peace in the middle. than put the top and bot-em back on each other. After that put your Art Glitter bottle with pin faced down into the soda bottle. Sometimes you have to shake the bottle but it last for a very long time.
Thank you for all your tips about this glue, just order a bottle would like to check it out.
Thanks for the clear instructional video and tips! I just bought the art glitter glue from Amazon and was wondering how to put the tip on.
You’re welcome Patrice 😉👍
I love this glue. Thanks for the information.
You’re welcome CraftyTiffy 🥰! I love this glue too. It’s been a few years before having to setup a new bottle. That’s not bad for a quality glue 😉
Thanks for sharing your applicator bottles, I prefer the scotch glue and have looked for quite sometime for an applicator alternative, excited to order them ... TY 😎
You’re welcome! You will LOVE the FineLine Applicators! Thanks DOR watching 🥰
This is one of my favorite glues 💕💕
Thanks for the tips on the tips! I wonder if you keep your glue sitting up and place the pink plastic glue saver thing on top of the glue, if that would keep it from drying out? I have a different top to my AGG. It is more like the one that you purchased from Hobby Lobby. It is a pain trying to get that tiny pin into the tiny tip. It would be easier to place something like that pink cap down over the glue than to try to stick the pin into the tip. Thanks again!
Thanks for sharing
You’re welcome Moe 🥰
Ooo why not maje your own dangle, if you take the beads off the others, link them together and attach them to a stud butterfly back and slide it on the pin.
I bought the fine tip and stainless steel needle, and the needle is to thick for the tip. I have to use a wire to unclog it. It's a pain. Thank you for telling us about the fineliner.💙
Yes, the Art Glitter clogs more than the Bearly Art Glue. After using both for awhile now, I reach for the Bearly Art all the time.
When I put the metal tip on nothing comes out? What am I doing wrong lol
Are you taking the other tip off first? Or are you pushing down hard enough and twisting?
@@peggiestafford4169 I’ve followed instructions to the T and nothing worked, I Macgyver my way through every conceivable way with tips, hacks and different configurations. I gave up in the end and purchased some small tip bottles, it’s easy, no mess or fuss I just wish the bottles were bigger. Thank for you reply 👍🙏
I don’t like Art Glitter Glue. If I don’t use it for a few days to a week, the glue gets clogged in that metal tip and it is a BUGGER to clear.