Making 700 HP on a 2200lb RX-7 is ROWDY

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.พ. 2025
  • Go to drinkag1.com/r... to get started on your first purchase and receive a FREE 1-year supply of Vitamin D3+K2 and 5 travel packs. Thanks to AG1 for sponsoring today's video!
    AG1 is a comprehensive, nutrition drink engineered to fill the nutritional gaps in your diet and support your body’s nutritional needs across four pillars of health: Gut health, Immune support, Energy and Recovery! It’s packed with 75 vitamins, minerals, whole-food sourced ingredients and combines the perfect amount of micronutrients, absorption and taste to jumpstart your daily routine. AG1 is available in the US, Canada, UK and Europe.
    T-Shirts: www.dahmracing...
    Patreon for Build Videos: bit.ly/2koiw8G
    Instagram: bit.ly/RobDahmIG
    Subscribe to Rob Dahm: bit.ly/1OAN9yi
    AWD 4 Rotor Video Series: bit.ly/2QiFduE
    Music:
    ------------------------------
    Mahogany by Filo Starquez / filo-starquez
    Creative Commons - Attribution - NoDerivs 3.0 Unported - CC BY-ND 3.0
    Free Download / Stream: bit.ly/46WPW14
    Music promoted by Audio Library bit.ly/46Y3tFz
    ------------------------------
    Flower by KV / kvmusicprod
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/46m7qmB
    Music promoted by Audio Library bit.ly/3Sw2g3W
    ------------------------------
    Enchanting Darkness by Artificial.Music / artificial-music
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download: bit.ly/3MszYU4
    Music promoted by Audio Library bit.ly/40pgTrB
    ------------------------------
    Floating by Alex-Productions / alexproductionsmusic
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/4a80ix1
    Music promoted by Audio Library bit.ly/41gunqb
    ------------------------------
    Oceandrive by Scandinavianz / scandinavianz
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/4a9ZuIe
    Music promoted by Audio Library bit.ly/46Mgl0P
    ------------------------------
    Dance Tonight by Hotham / hothammusic
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/47dNnYw
    Music promoted by Audio Library bit.ly/47jIzRu
    ------------------------------
    Midnight - Mehul Choudhary / mehulchoudhary
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/48g5hKo
    Music promoted by Audio Library bit.ly/41sLGVg
    ------------------------------
    Designed by KV / kvmusicprod
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/3NtGWZB
    Music promoted by Audio Library bit.ly/3Rr1ymh
    ------------------------------

ความคิดเห็น • 617

  • @2thgun
    @2thgun ปีที่แล้ว +769

    "dropping everything to focus on 12 rotor" "dropping everything to get ready for the race" 2 rotor 2200 haha

    • @eriklarson9137
      @eriklarson9137 ปีที่แล้ว +26

      Only working on the 12 rotor. Lol

    • @shize9ine
      @shize9ine ปีที่แล้ว +7

      Underrated comment. ❤

    • @golfy808
      @golfy808 ปีที่แล้ว +7

      And then you watch those other two videos and wonder.. what did u just watch lol

    • @ThatZenkiS14
      @ThatZenkiS14 ปีที่แล้ว +14

      you have to wait for parts etc, doing those times it wouldnt make sense to not woork on what you have that can be done. if im waitng on stuff for my 240 i cant get locally i work on my bike build or my police scat pack. doesnt mean the 240 isnt still the focus

    • @stuartraffle7148
      @stuartraffle7148 ปีที่แล้ว +21

      I couldn't help but notice an invoice dated Nov. 7th 2023, so I'm guessing this video has been around for a little while before the 12rotor plan and Pikes Peak news.

  • @the-d2506
    @the-d2506 ปีที่แล้ว +509

    At this point Rob can definitely take apart a Rotary engine blindfolded....

    • @joemaddoxrx7
      @joemaddoxrx7 ปีที่แล้ว +6

      Except for that he fucked it up when doing it

    • @joemaddoxrx7
      @joemaddoxrx7 ปีที่แล้ว

      How are you gonna fuck up the thermal pellet?

    • @carlbotha1289
      @carlbotha1289 ปีที่แล้ว +2

      Have you ever considered drilling small diameter holes under the apex seals into the rotor to get oil supplied under pressure under the apex ?

    • @apocalypse94
      @apocalypse94 ปีที่แล้ว +10

      Rob can probly smell what type of apex seals they use

    • @mikescherrer4923
      @mikescherrer4923 ปีที่แล้ว

      Yeah, that's easy. Putting one together blindfolded would impress me. 😂

  • @rotary_13b78
    @rotary_13b78 ปีที่แล้ว +574

    only Rob would upload at 10:30pm

  • @BotsYourAcc
    @BotsYourAcc ปีที่แล้ว +243

    I'm busting ass trying to get my $1500 85' RX7 build done before Pike's Peak to drive it out and watch you.
    Never worked on a rotary before, bought a trashed engine and a $300 roller, teaching myself everything to rebuild this shitbox.
    Never seen any race in person, this needs to be my first ever. Can't wait to see you and your build in person.
    Keep this stuff up, love your work and your character.

    • @yannicg
      @yannicg ปีที่แล้ว +5

      That’s epic

    • @l8tapex
      @l8tapex ปีที่แล้ว +13

      You are taking on pleasure of life...... while having moments of pure madness. Welcome!

    • @sevensix2stroke201
      @sevensix2stroke201 ปีที่แล้ว +2

      I just got my 86’ running, are you in Colorado? Hit me up if you need some help!

    • @PenumbralFigure
      @PenumbralFigure ปีที่แล้ว +2

      HELL yes brother, get that car done! You can do it 💪💪

    • @miatacheese
      @miatacheese ปีที่แล้ว +1

      godspeed brother

  • @tomstech4390
    @tomstech4390 ปีที่แล้ว +110

    Rob: So I've flattened a seal.
    Japanese sailor: First time?

    • @RobDahm
      @RobDahm  ปีที่แล้ว +12

      This hurt to laugh 😬😂

  • @brycemueller7330
    @brycemueller7330 ปีที่แล้ว +201

    Nothing gets me out of bed faster than Rob Dahm uploading at 12:30AM Minnesota time

    • @cassette_elk
      @cassette_elk ปีที่แล้ว +6

      Fellow Minnesotan! Good on you. Fix your sleep schedule tho.

    • @Dntworryboutit1
      @Dntworryboutit1 ปีที่แล้ว +1

      Lmao same here😅

    • @dubiousf00d
      @dubiousf00d ปีที่แล้ว +2

      Me as well. Lol Too warm anyway, cant sleep😂

    • @asmahanumer
      @asmahanumer ปีที่แล้ว

      it's 1230 pm in here 😱🫣

    • @rya3190
      @rya3190 ปีที่แล้ว

      Helps my night shift go by...

  • @rotaryperfection
    @rotaryperfection ปีที่แล้ว +157

    39:56 Rob you have it backwards. Those two throttle plates on that FD UIM are for the Double Throttle set up. They don't actuate at low rpms as you think. They work based on engine temp and stay closed full time until the engine comes up to a safe temp. Mazda did this to prevent the engine from over boosting when cold. The factory throttle body itself has the delayed opening of the secondary throttle on top that feed the secondary runners separately. So on the FD, at very light throttle, the top two plates are closed and then slowly open with more throttle.
    Now the #1 reason you have low end idle/drivabilty issues with open UIM is because those manifolds don't separate the primary from the secondary. The open chamber to both runners slows down the air flow substantially, which makes it turbulent. That inconsistency of flow also keeps the fuel from automizing. Also, remember that the secondary runners opening timing on the plates has a slight over lap on the intake side. That doesn't help flow on the bottom end either. I'm an NA guy who builds my own intakes, so you have to have an understanding of flow. My NA 20b has secondary throttle plates that open at specific rpms to help drivabilty. You can hear how smooth my engine sounds on my starter upgrade videos for reference.

    • @The_TIP
      @The_TIP ปีที่แล้ว +15

      @RobDahm look at this one

    • @kp28az
      @kp28az ปีที่แล้ว +10

      I’d post this again on his next video if he doesn’t see it^

    • @kbartlett
      @kbartlett ปีที่แล้ว +2

      What was backwards? They way you explain it is more or less the same way Rob explained it...

    • @rotaryperfection
      @rotaryperfection ปีที่แล้ว +14

      @LeftysRule22 On a stock FD upper, Rob thought those two upper butterflies actuated on and off depending on throttle position/rpm. Those particular two throttle plates only stay closed when the engine is cold. Once the engine is warm, they open and stay open continuously. There is no open and shut with engine rpm on the factory setup like he was claiming early on. The throttle plates on the throttle body itself have delayed mechanical opening. Now, once he put back the FD UIM on that new machined single throttle body, he was able to use those plates as secondary shutter valves. I was just explaining that those plates don't work that way on the factory car like how he's used them in the video.

    • @kbartlett
      @kbartlett ปีที่แล้ว +1

      @@rotaryperfection He was just demonstrating the concept because his throttle body doesn't have the second butterflies.

  • @RDSAlphard
    @RDSAlphard ปีที่แล้ว +33

    I watch Rob Dahm since his Detroit days, and I really gotta say Rob changed a lot on his approach of modifying car, from absolutely butchery to absolutely professionally crafted! I admire your ability to change & getting rid of the old stuff too.

  • @bradhughes613
    @bradhughes613 ปีที่แล้ว +11

    As a machinists seeing full speed rapids and lack of use of single block is giving me anxiety. If we are really watching the first time run of new programs.. one day it isn't going to go so well and you're going to learn the purpose of rapid override and single blocking. Been a machinists for 20 years and I'm currently the main programmer/operator for all the 5 axis in our shop, It's not IF you crash the machine, its WHEN you crash the machine.

  • @revus5078
    @revus5078 ปีที่แล้ว +46

    Late night Rob post
    I’m here for it

    • @RobDahm
      @RobDahm  ปีที่แล้ว +25

      Only weird rotary things happen at night haha

  • @dmp.performance8635
    @dmp.performance8635 ปีที่แล้ว +78

    So happy to see Isaiah again! Watching this master work his art is amazing

    • @claudedottin1312
      @claudedottin1312 ปีที่แล้ว +3

      Yah same 😂

    • @marcopoloonpollo5937
      @marcopoloonpollo5937 ปีที่แล้ว +6

      I still want to see him put a three-rotor in the RX-8

    • @fullsendmarinedarwin7244
      @fullsendmarinedarwin7244 ปีที่แล้ว +2

      The fab guys really make these channels special! Isaiah , Tye from Cleet, Wyatt from BosstedBoyz

    • @dmp.performance8635
      @dmp.performance8635 ปีที่แล้ว +1

      @@marcopoloonpollo5937 100%. I still have hopes of seeing the rx8 get redeemed

  • @Designer_Dude
    @Designer_Dude ปีที่แล้ว +6

    It's been a real pleasure watching your channel grow, I remember watching videos about getting more comfortable with the camera, how you afforded a Lamborghini, and other random content.
    The fact you're still so excited to learn AND to share your experience(s) with us is amazing. Thank you for taking us all on this ride!

  • @802Garage
    @802Garage ปีที่แล้ว +28

    18:01 Daaayum that technique! Watching a master at work. 🙇‍♂

    • @quesecchu7026
      @quesecchu7026 ปีที่แล้ว +1

      sheeeesh i was about to say the same thing, no beginner know how to put their hips into it like Rob does.

  • @joecosta3416
    @joecosta3416 ปีที่แล้ว +7

    Stoked on the FC getting some love! Rob though, PLEASE start using the single block function on your CNC, which pauses after each line and use the feedrate knob! I used worked as a CNC machinist for around 5 years and you basically ALWAYS want to use single block on a fresh setup and fresh code, then use like 5-10% feedrate to get in close to your part. Once you see that it's not going to crash and looks good, slowly crank it up to 100% and listen to it to make sure everything's good. After the line of code finishes, hit your next line at 0% and slowly bring it up, then hit it to 100%. I get time is money, but sooner or later you'll put that poor HAAS out of commission going full bore every time. If you don't feel you have the time to babysit the machine through all of that, at the very least do that at the very beginning when you're moving 10 inches per second, or whatever. At a slow cutting reedrate you'll fuck up the part or the tool at worse probably, but at the beginning going that fast and crashing hard can do a lot more damage than that.

    • @joecosta3416
      @joecosta3416 ปีที่แล้ว

      With that said, you're doing fantastic work with that thing, especially with not slaving it out in a traditional shop and learning on the fly!

  • @LilYeshua
    @LilYeshua ปีที่แล้ว +14

    I had a '91 RX7 NA version I bought new and it was a joy to drive especially with it's road handling capabilities. Idling oil pressure was 64 psi. It pulled strong as a mule all the way up to 100 mph and the 0-60 mph in first gear was something out of this world

    • @ronin_117
      @ronin_117 ปีที่แล้ว +2

      Sold my 93 fd in high school miss it every time I see a rob video

    • @bentleypixel763
      @bentleypixel763 ปีที่แล้ว +1

      ​@@ronin_117how did you have an FD in high school?

    • @ronin_117
      @ronin_117 ปีที่แล้ว

      @@bentleypixel763 because they were 13k back then

    • @bentleypixel763
      @bentleypixel763 ปีที่แล้ว +1

      @@ronin_117 how did you get 13k in high school? That's quite an accomplishment.

    • @ronin_117
      @ronin_117 ปีที่แล้ว

      @@bentleypixel763 thank you, it was years ago, I fixed mopeds and sold them, worked full time, used that money to buy and fix cars and sold them to save some money up to buy a nicer car. It was like 2006-7 that's how I did it

  • @joshuadotl
    @joshuadotl 10 หลายเดือนก่อน +1

    Love the lower intake adapter. I’m not sure per runner O2 sensors will work correctly when they are installed in an environment with 900 degrees and 4 atmospheres of EMAP. Also I flattened corner seal springs around 10 years ago. I was using E85 fuel + water injection and experimenting with ‘lean’ air fuel ratios looking for power on a small turbo setup. I attributed it to detonation resistant fuel and very hot EGTs.

  • @MeachPango
    @MeachPango ปีที่แล้ว +12

    ive never watched one of your videos 1 MINUTE after posting. glad i was here early. Love ya rob, thank you for proving to me that anybody can do anything that they set their mind to.

  • @webb2800
    @webb2800 ปีที่แล้ว +18

    I saw your insta post a while ago asking for applications for a fabricator, then Isaiah stopped appearing in the vids. Glad to see he's back, I was getting worried!

    • @justinvoelker9781
      @justinvoelker9781 ปีที่แล้ว +1

      The first part of the video was old, the second part was newer. Hence why Rob was welding. I don’t want to speculate but just pointing that out

  • @JBNL1972
    @JBNL1972 ปีที่แล้ว +10

    feeling sick, slept horribly, woke up, see a Rob Dahm video - boom, instantly my day is infinitely better.

    • @phillgizmo8934
      @phillgizmo8934 ปีที่แล้ว +1

      His turbo talk boosts you.

    • @JBNL1972
      @JBNL1972 ปีที่แล้ว

      @@phillgizmo8934 absolutely!

    • @Smokkedandslammed
      @Smokkedandslammed ปีที่แล้ว +1

      Doctors hate this one weird Rob Dham trick.

  • @patrikljungqvist2855
    @patrikljungqvist2855 ปีที่แล้ว +18

    Wohooo, isaiah is back brothers

  • @oswqld
    @oswqld ปีที่แล้ว +31

    Been waiting for this since the instagram tease!

  • @bumpstart
    @bumpstart ปีที่แล้ว +3

    finally you took on what bumps/PK has been yelling for years . secondary throttle delays when set up as boost /load only is a huge win . and 2.5 inch pipes support 650 hp

  • @josef6658
    @josef6658 ปีที่แล้ว +7

    Man that is super light weight 😮 power to weight is wild. I was hanging around at laguna seca while you fixed the break solenoid but missed out on meeting you. My brother did get to those keep it up rob

  • @keithlabudde4184
    @keithlabudde4184 ปีที่แล้ว +3

    I'm always impressed with the amount of genuine engineering Rob does for his builds.

  • @kitvexed8229
    @kitvexed8229 ปีที่แล้ว +2

    i love Rob.. he's like a mad scientist that just sees things differently than most techs.. i wish him and VIN would collaborate on some projects - my fav youtuberz!

  • @JNatella
    @JNatella 10 หลายเดือนก่อน +2

    Did he weigh it? Because as an FC owner, they're slightly heavier than FDs. My car was stripped and it still weighed 2600lbs with a turbo setup. That car still has full interior.. it's basically stock so it's likely at least 100lbs more

  • @sHoRtBuSseR
    @sHoRtBuSseR ปีที่แล้ว +2

    Pro tip: get yourself some FUPA cups for your tig. Makes aluminum welding 100x nicer. They're from Furick and they sell a really nice kit that should fit your CK worldwide torches. Total game changer for aluminum welding.

  • @feenyx6394
    @feenyx6394 ปีที่แล้ว +2

    That came out stronger than expected!
    Always love a bit of FC action, also happy to see Isaiah again!

  • @TheChrisey
    @TheChrisey ปีที่แล้ว +14

    Don't forget that, while the plugged O2 sensor might last longer, the sampling delay will be significantly larger too. Those extra holes will allow the gases to quickly vent right through it, but with only 1 hole at the top, the new gases passing by will have to first mix in with the old gases that sits in the little chamber before it can be read accurately

  • @TurblownEng
    @TurblownEng ปีที่แล้ว +13

    The FC is finally faster than the rotary corvette, justice served.

  • @figmentfire
    @figmentfire ปีที่แล้ว +2

    So good to see the FC getting some love, I absolutely love these cars!

  • @okami803
    @okami803 ปีที่แล้ว +2

    Amazing work. Really appreciate your knowledge and your willingness to share it.
    I've spent my life in the wrong areas, doing the wrong things. Time to make a change. Thanks for the inspiration

  • @gsxMac24
    @gsxMac24 ปีที่แล้ว +3

    Dahm is a true gear head cause none of his projects are ever finished lol. Always room to make it better, faster, stronger, and to learn.

  • @kb9oak749
    @kb9oak749 ปีที่แล้ว +1

    We know the crew have mad fab skills, but can we take a moment to appreciate the camera work? Amazing production too!

  • @MannOfTheHill345
    @MannOfTheHill345 ปีที่แล้ว

    I gotta say, the B roll is so well shot it feels cinematic. It's been that way for a while, but the panning and rotating shots in this one are so smooth!

  • @MrPeterRosel
    @MrPeterRosel ปีที่แล้ว +1

    Hey Rob, I saw you measuring your wires with a tape measure. Just stick a steel ruler (1meter/2meter) to your shelving unit then you don’t have to hold the tape all the time.

  • @broncobill392
    @broncobill392 ปีที่แล้ว +1

    I absolutely love seeing my old girl getting all the love! 👍🏽👍🏽

  • @ralphd9753
    @ralphd9753 ปีที่แล้ว +1

    Nice job in building the S4. Looks like the rear plate won't crack when done right.

  • @josephmatuszak3855
    @josephmatuszak3855 ปีที่แล้ว

    For cleaning the coolant passages and stuff in the rotor housings.... I use various bore cleaning tools on a dremel with a mix of detergeants.

  • @MultiTravellingman
    @MultiTravellingman ปีที่แล้ว

    You are the dividing line between built and bought. Rich enough to afford the best quality parts and vehicles, but smart enough to make them better with the help of your team.

  • @benputhoff9898
    @benputhoff9898 ปีที่แล้ว +1

    glad to see the FC getting some love!

  • @RastaBIasta
    @RastaBIasta ปีที่แล้ว +8

    My mans welding skills are imaculent.

  • @paytonhurst7342
    @paytonhurst7342 ปีที่แล้ว +1

    Just fyi, if you turn the ac frequency up on your tig welder, not only will it make it easier to weld but also clean the metal better making the weld look a lot better.

  • @bretbauer7582
    @bretbauer7582 ปีที่แล้ว +1

    I swear, watching someone make a rotary work is like watching someone try and qualify for the pole of the Daytona 500 with a flathead Ford. I give Rod a lot of credit but it's amazing to me how good a modern EFI system on a 4 stroke works in comparison.

  • @seaturtle828
    @seaturtle828 ปีที่แล้ว

    That intake information is so useful even applying it to my holley on a 12a all year I was try to get the dead smooth idle the stock nikki has but I probably never will be cause the holley is just flowing so much more air at idle than is probably 100 percent efficient. It's cool for you to share your information and help out us little guys that don't have access to what you've created for yourself. Thank rob keep it up man.

  • @xXboingXx
    @xXboingXx ปีที่แล้ว

    Your build videos are very clear and concise. I've never worked with rotaries, but you have it down to a science. I'm definitely looking forward to seeing what it can do in a 1/4 mile.

  • @markymark247
    @markymark247 ปีที่แล้ว +1

    It’s 2:26am on the east coast, I’m stressing about a flight in 10 hours, but the first 8 seconds of this video put the biggest grin on my face and I gotta say thank you!!!

    • @markymark247
      @markymark247 ปีที่แล้ว

      That harness that you clipped could be reused with a nice bulkhead connector, keep ya from running whole built harnesses through the firewall again

  • @Shifty_Malone
    @Shifty_Malone ปีที่แล้ว +1

    Rob uploading for the East Coast... of Australia! Thanks from Australia, Rob!

  • @Kyrazlan
    @Kyrazlan ปีที่แล้ว

    Man... I feel like this will be a missed detail. That segway into AG1 was flawless and a really apt description.

  • @RGHTBrainDesign
    @RGHTBrainDesign ปีที่แล้ว

    Well, at least I know you're my #1 Fan, Rob. Thanks for taking the time to prove me right.

  • @garethbennett9680
    @garethbennett9680 ปีที่แล้ว +1

    We tested the prototype Turblown UIM for Elliot on a Green Bros FD3S Semi PP with an EFR 9180 here in New Zealand and made over 600 rwhp on 21psi with pump gas and water/meth with a very flat torque curve. Never underestimate the 9180 as this is a very capable turbocharger.

    • @drsgme5659
      @drsgme5659 ปีที่แล้ว

      Rob's back to back results are pretty incredible ( next video )

    • @garethbennett9680
      @garethbennett9680 ปีที่แล้ว

      @@drsgme5659 We will probably be too late to get you results after we have re-shelled the car with the EWG for your testing. Also going Conti ABS at the same time

  • @MadRS
    @MadRS ปีที่แล้ว

    Rob and the boys. I have to say your channel is in my top 5 that I always check for a new video on. It's so cool to watch what you do and has inspired me to buy a classic Toyota and fit a 13b as my first rotary powered car. I'm not sure if you have any video's but I would love to see a NA build series that shows what needs to be done to get the most out of a NA build.

  • @exerosis5758
    @exerosis5758 ปีที่แล้ว

    "What does this mean? It means you need a THIRD o2 sensor." Words to live by! I'm hoping to get my own FC and learn to work on these beautiful machines this year!

  • @KSwapTheWorld69
    @KSwapTheWorld69 ปีที่แล้ว +2

    1:08 I LOVE how preverted you are its great!!!🤣😂 "Professional Prostate Exam" 🤣

  • @ZLAKLR20B
    @ZLAKLR20B ปีที่แล้ว

    We use the Rear turbo oil drain on my wifes FD for the right hand side breather, on my FD we use the location of where the OMP usually is but is gutted not. We run a -10 line like we do from the oil filler side

  • @kevorkyijan118
    @kevorkyijan118 10 หลายเดือนก่อน

    Micromanaging every single aspect of an Engine always makes me happy.
    My NSX needs some of that love...but no one around here knows how to do it...and im just trying to get a more smoother passage between gears😭😭

  • @iamchrisdammit
    @iamchrisdammit ปีที่แล้ว

    28:23 That throttle body came out cleeeeeaan! I’m loving this video so far. All the fab work, wiring, detail things. Fucking love it man! MORE!

  • @aserta
    @aserta ปีที่แล้ว +5

    FabDaddy with that clutch extraction!

  • @jasonsapp792
    @jasonsapp792 ปีที่แล้ว

    Wow... That's really impressive numbers.... Rob is definitely a rotary guru!

  • @youtubeadmin3158
    @youtubeadmin3158 ปีที่แล้ว

    It's almost like dieseling at idle with those full open manifolds definitely a good observation and something to look into and experiment with for the future

  • @stevesolo16
    @stevesolo16 10 หลายเดือนก่อน

    To keep the motor cool, you need a water/methanol sprayed into the intake manifold. You use carb jets to control the feed. You will see power gain along with a much cooler head temps straight away.

  • @Slowlb7
    @Slowlb7 10 หลายเดือนก่อน

    This is kick ass watching you guys custom fab parts in youre own shop. Every car guys dream!

  • @GTRliffe
    @GTRliffe ปีที่แล้ว

    that Aerospace goo is better around coolant, That brown stuff you brush on stays wet-like and repels water heaps good. handles pressure way better than selastic

  • @tiaraguy7705
    @tiaraguy7705 ปีที่แล้ว

    This dude having to upload right when I need to sleep for work is the best and worst thing

  • @nathanelias8728
    @nathanelias8728 ปีที่แล้ว

    only watched a few minutes , i got to get outback do some tig welding and wiring , thanks guys sometimes motivation comes from what relaxes you, taught me alot , but like rich says if your hands aren't filthy .....

  • @A2J_Tim
    @A2J_Tim ปีที่แล้ว

    I swapped a 2jz into an fc rx7 and it was pretty fast for stock turbos, suprised alot of people and actually hooked really well.

  • @rotaryenginegodfatherllc
    @rotaryenginegodfatherllc ปีที่แล้ว +4

    Isaiah Saved the engine 🙌🔥

  • @-PLAYER0NE-
    @-PLAYER0NE- ปีที่แล้ว

    Wow that thing is wild! Must be insane to drive with that power to weight ratio. I always liked the fc more personally so im glad to see it back making content.

  • @kmonkey4138
    @kmonkey4138 ปีที่แล้ว

    Thank you for giving me motivation to work on my Turbo II

  • @HitokiriRaiden
    @HitokiriRaiden ปีที่แล้ว

    Loving these videos, really shows the ins and out of the rotary engine and how good they can be with a little work.

  • @TheRotaryPoweredGarage
    @TheRotaryPoweredGarage ปีที่แล้ว

    A couple of things to mention,Not only the PuertoRicans use EGT's for tuning,but they are mostly for tuning WOT,and to monitor that front and rear are equal instead of relying on O2 due to being post turbo(exhaust is mixed).also the stock lower FD intake is known to have flow imbalance due to runners have to curve different front to rear,so it's the worse part of your new system.lastly it's not bullshit that a different setup will make more power on less boost.i will because the system is more efficient.seen it.

  • @mrbookends
    @mrbookends ปีที่แล้ว

    Somewhere there's an FC patiently waiting for me to acquire it....... Keep up the great work!

  • @mitchhifi9192
    @mitchhifi9192 ปีที่แล้ว

    I bought a sample of AG1 I didn't like it until I hit it with the Soda Stream and added some arborvitae which is my usual heath and joint supplement, the two are actually perfect for each other in amounts that don't exceed certain vitamins.

  • @kevpatt
    @kevpatt ปีที่แล้ว

    Absolutely amazing work and a crazy amount of power for a 2 rotor! Congrats!!!

  • @jordanE1451
    @jordanE1451 ปีที่แล้ว

    It's insane seeing how much Rob has learned over the years!

  • @CactusJack252
    @CactusJack252 ปีที่แล้ว

    I'm so happy to see a FC get some love

  • @oneblindambition
    @oneblindambition ปีที่แล้ว

    Funny on my semi pp build that I’m working on I’m doing a similar trick using the FD manifold with the butterflies and then a dbw throttle bodie. Thanks for doing the research for me 🤣🤣🤣 keep it up brotha 🤘🏻

  • @julioburgos4979
    @julioburgos4979 ปีที่แล้ว +1

    Rob, you have a great team!!!

  • @cableguy130
    @cableguy130 ปีที่แล้ว

    A ton of those issues go away when you switch to a low air space short runner high flow intake.
    You still need a small open plenum behind the throttle body.

  • @peterkoch3777
    @peterkoch3777 ปีที่แล้ว +1

    Naiiiiice welds😂
    And putting the Motor together... should we use a proper engine lift? Nah, this plastic bucket will do❤

  • @somewhatofaprofessional7940
    @somewhatofaprofessional7940 ปีที่แล้ว

    I love the little montages of Tig Daddy with the smooth music ❤❤️

  • @obesewhopper775
    @obesewhopper775 ปีที่แล้ว +1

    I love this style of video just huge progress on one car love it

  • @AKcoldfront
    @AKcoldfront ปีที่แล้ว

    well I'm glad I'm watching this through because I'm building a boosted Honda b18c1 but i comes with a dual runner manifold ran off vacuum so this will help mew out in deciding what to run for 550hp

  • @martijnvkk
    @martijnvkk ปีที่แล้ว +1

    I just love rotaries, havent seen many rx7/rx8 in real life. But i just love the video's!

  • @funkalicious2002
    @funkalicious2002 ปีที่แล้ว

    I never expect middle of the night uploads, but I always love them.

  • @sayers_repairs
    @sayers_repairs ปีที่แล้ว

    Great video, as always! I LOVE that fc. I sold my last rotary mazda in 2010 (fb Rx7). I recently picked up an Rx-5 cosmo, and then in the dyno scene, I see one on a lift.😯

  • @high633
    @high633 ปีที่แล้ว

    Once again another well made rob video with amazingly paired music.

  • @mustangthekitten7765
    @mustangthekitten7765 ปีที่แล้ว

    suprised rob doesnt know literally everything about every rotary by now bros a genius

  • @camerong5349
    @camerong5349 11 หลายเดือนก่อน

    Your the only other person besides myself I know that's done water injection pre turbo. Was a great setup!

  • @jslim_fa5371
    @jslim_fa5371 ปีที่แล้ว

    Just love how Rob explains everything. It mind blowing.😄👍

  • @josezuma2116
    @josezuma2116 ปีที่แล้ว +1

    Rob, considering you did such as impressive figure with a street sport, what would be the potential or benefit of a bridgeport turbo?

  • @evo2500
    @evo2500 ปีที่แล้ว

    so glad you still upload. i remembered you out of nowhere

  • @Hammerback0
    @Hammerback0 ปีที่แล้ว

    I see the DC Power alternator. Anthony at DC Power is the only guy I could find willing to make a high output alternator for a Toyota Carolla. The Rolla came factory with a 70A alternator, DC Power built a 320A H.O. unit for it a couple of years ago, I daily drive it 130 miles per day since, the alternator has never missed a beat. (Literally)😂

  • @TabMcLain
    @TabMcLain ปีที่แล้ว

    Rob man you can really do it all. Such an inspiration 🥹🫶

  • @jesselopez0008
    @jesselopez0008 11 หลายเดือนก่อน +1

    27:15 as someone who designs volutes for turbos this pained me a lot

  • @AVD128
    @AVD128 10 หลายเดือนก่อน

    Nice to see Isiah! He brings a lot to the videos!

  • @hunterjames8251
    @hunterjames8251 ปีที่แล้ว

    Rob you need some bulkheads for your wiring harnesses to run through the dash! If I remember correctly like the F1 car? That way you can keep it installed on the engine and no more cutting harnesses lol.

  • @dontdowhatido6503
    @dontdowhatido6503 ปีที่แล้ว

    out of all the youtubers you are the one that is making me want to buy ag1. love your vids man

    • @dontdowhatido6503
      @dontdowhatido6503 ปีที่แล้ว

      also where can I buy all the wiring supplies like the connectors and such. I'm dying to make my own custom harness for my ls swapped 240

  • @Pickfordr100
    @Pickfordr100 ปีที่แล้ว

    Darude, sandstorm!! My respect for Rob has greatly increased 👍👍

  • @coldmoonlight6361
    @coldmoonlight6361 ปีที่แล้ว

    I'm always down for a late night episode of Rowdy Rob's Rotary Radventures 🤘