How To Replace The Tie Rod Assembly And Adjust Toe In On L series Kubota Tractor.

After getting my Kubota tractor stuck in the mud, I realized that I had bent the driver's side tie rod assembly. I purchased the part from my local Kubota dealer. This video instructs how to replace the old tie rod and install the new one. Be careful to note the position of the original tie rod you take off. I made the mistake of switching the position. So after the job was completed, I had to swap it around. After replacing the tie rod, I adjust the toe in as the manufacturer instructs us to. No need to have the dealer replace it. You need a 7/8 inch wrench to remove the tie rod nuts, diagonal cutting pliers to remove the cotter pins, 2 cotter pins, and a 1 1/8 inch wrench to adjust the tie rod.

[@sycamoreranch3983]

I had the exact same damage on my l3901. I ran up on a large firewood round I didn't see. I used your video to fix it. Borrowed a pickle bar tool from my local Auto Zone. Thanks for posting!

[@lukeprice742]

Had this same thing happen this week and needed to repair myself. Perfect video to fix it. Thanks for posting.

[@johndeweyoutdoors7725]

You're welcome. Thanks for the response.Love my Kubota.

[@johndeweyoutdoors7725]

If you’re talking about the bolt on plate at the bottom. It came with it. Along with the Q15 quick 3 point hitch. It’s the 50th edition.

[@robertperkins3584]

Nicely done 👍

[@nolefishatgmail]

I recently purchased an l3902 what blade do you have attached to your bucket?