INSTALLATION: ATS 68RFE Thermal Bypass - 2013-2022 Ram 6.7L Cummins
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- This is a must for any truck that has a 68-RFE or Aisin AS69RC transmission in it. Dodge decided to incorporate a transmission cooler by pass valve into the cooling system of the 68-RFE and Aisin AS69RC that bypasses the transmission cooler during cold operation.
To find out more about, or order the ATS Thermal Bypass Valve Upgrade:
· 2013-2018 Dodge Ram 6.7L Cummins ·
www.atsdiesel....
· 2019-2022 Dodge Ram 6.7L Cummins ·
www.atsdiesel....
The intent is to force the transmission to warm up faster, the reality is this bypass valve leaks and sticks in the bypass position in almost every case causing the transmission cooler flow to bypass the trans cooler essentially eliminating the trans cooler from the circuit. This causes a severe damage to the transmission over time.
The ATS cooler block replaces the faulty design eliminating the bypass valve and ensures 100 percent of the trans cooler flow is forced through the trans cooler. In every case this substantially reduces transmission temperatures.
I bought the bypass for my powerwagon with the 66RFE ; it was not as easy to install due to the return lines all being aluminum, but its manageable (2 hours max) but once installed WOW! trans went from 185 when towing my 8k TT to 140.....amazing product, a must for at least the 66RFE. It does what is says, if you got a Ram, GET IT WORTH THE MONEY!
we need a new/updated video on the newer trucks since the block and connections have changed, thanks
Last week I installed the ATC pass-thru block on my 2016 Ram mega dually 6.7 with 68RFE. It took more time to get the tools gathered and the truck jacked up. Once that was done it took less than 10 minutes to install. I had a couple small plugs ready and lost less that 1/2 quart. I just returned from a trip pulling our 15,500 lb 5th wheel from Charlotte, NC to Surfside, SC, 410 miles round trip. We do this trip 2-3 times each year. With the OEM thermostatic controlled block the trucks digital gauge would always read between 170 and 173 degrees. These are the same temps the truck always showed no matter the time of year or the load being towed. It was always 170-173. With the ATS block there was a wider range when towing. At 45 in stop and go traffic it was 169-172. At 55-65 on roiling grades it was 161-169. At 65-70 on rolling grades it was 165-171. At 73 MPH on basically level grade it stayed between 169 and 172. Unloaded running 75 around I485 in Charlotte is was 159-164.
Update: I drove to work the last two days empty, 55 miles each way at 70-75 MPH. It was 72F both morning and the trans fluctuated between 139 and 145. In the even ing is was 92F and the tran was between 160 and 167. I've parked the truck for a few weeks as diesel is to expensive for the daily 110 mile trip buy will update the next time I get it out of the warehouse.
Did you fill back up through dipstick?
installed mine today on my 2022, took all of 15min, most of that time was used up waiting for the fluid to stop running/dripping enough for me to get the new block on without making a mess... 🤠
I did this install on 2019 2500 and lost 4 quarts of oil. Transmission also shifted funny during the first test drive after service, but all it was doing was re-learning. Transmission temps are around 30 degrees cooler unloaded (130-140 degrees F) now.
Thanks! Great video.
My droped from 175 to 130 should I keep the bypass,Is that the work in temperature for the oil
thanks, waiting to see what fca is going to do with this exact current recall for a fix??? if they dont delete the bypass then I will be putting one of these on FOR SURE!!
FYI, I have a 2018 68RFE. It drained 4 quarts so be prepared.
Mine didnt come with new clips.
So why don't you sell an inline converter drain valve? Help us Diy'ers.
I have a 2012 Ram diesel, does it have a thermostat bypass valve, too?
I have a 2008 6.7 with lower mileage . It is my first diesel and I’ve obviously been scared to the point of thinking my transmission is always on the brink of failure. I tow a Jeep 4 or 5 times a year but otherwise try to keep it serviced and baby it. In my model years is there anything I can do like this to help my truck last. It is a new to me truck and essentially my dream truck because it’s the newest one I could ever afford. It will likely be the last vehicle I will ever purchase but could never afford t put a transmission in it. I just need to protect my truck and respectfully ask for any available help. Thank you for your time,and God bless . John
Will installing this void the powertrain warranty?
I want to order this, but we also need the 2 tubes coming from trans to this block. Do you have these?
Do gasers ram 6.4 also have this?
Do I gotta do a relearn after this mod
Why is it not Purple?
Where can I find this part? Help me out please.
I live in an area that can see -40c is this a mod I should do? Or keep the thermostat?
Any sort of cooler line replacement kit available since my ac line chafed my cooler line and there are non available in the country?
Seems well built I just installed on my 2018 ram 3500 aisin 69, it’s not leaking and took it for a test drive. Runs 134 degrees and with tow haul I got it up to 141.
What bothers me is the how I had to tweak and bend my hard lines connected to transmission and had to bend the hang down bracket because one hard line is supposed to be offset. There is a lot of tension on this. I ordered the PPE and they have a cool magnet plug on the side 20$ cheaper also.
Why wouldn’t ats match the factory dimensions?🤨 this part doesn’t fit without binding lines ….
2018 and up is the same by pass model or not
How do you bleed the transmission and radiator?
Does this come with new o rings for the screw in lines
Does Aisin have thermostat?
Yes on the 2013-present it does. What year is your truck?
@@ATSDieselPerformance , Considering getting one. Where is the thermostat located?
Will this fix the recall on rfe?..is it possible this is the reason for the fluid blowing out dipstick?
100% not the reason or any way related to the recall. This will not fix the fluid issue. Please check out this product: www.atsdiesel.com/ats-doomsday-device
@ATS Diesel Performance thanks for the advise..stellantis did recall but don't know if I trust the fix..thanks
Will this work on a 2012 with the 68RFE?
I had the same question will this work on a 2012?
Is this thermal bypass cannot prevent transmission fluid from overheating? It like having engine without thermostat. Brother in-law had his removed on Ford and first towing, transmission got overheated. He installed thermostat back and no more overheating.
What about just re-plumbing it with two direct lines and no block?
@davidprattdo Judging by your comment I’m going to assume you have no idea what the thermal bypass does, I will give you a quick and simple explanation! In order for your transmission to function properly your transmission fluid must reach a certain temperature but it cannot go over a certain temperature or it will burn and you will ruin your trans, Towing, towing uphills abusing the transmission will all cause your trans temp to rise! Those lines go to your transmission cooler to help keep your trans temp from getting too hot, However you don’t want them to get too cool so that thermal bypass valve redirects your trans fluid back into the transmission bypassing the cooler preventing the fluid from getting too cool! If you haven’t noticed transmission line sometimes will go into your vehicles radiator then it comes back out and then goes through the trans cooler then back to the transmission, The reason why the fluid runs through the radiator is to help get your trans temp up to operating temps on vehicles in cold environments such as winters in Minnesota!
❤
Thank you!👍🏼
Hello, I did this on my Aisin equipped 4500. It did not drain hardly any fluid at all. Would you happen to know why that would be?
Please contact our tech support team, as they will be best qualified to assist you (800) 949-6002
Mine won’t stop leaking past the O Ring on the threaded side. Can not source new O Rings to see if would stop the leak. Went to the dealer, and every parts store in town, no luck.
did you ever find these orings??
@@justinevans6227 Yes, I ordered an automotive O Ring kit from Amazon and it had what I needed. Thank you for asking.
@@Deno172just installed mine this passed weekend and it’s doing the same exact thing😊
Definitely stupid design and location of the thermostat. Designed to fail and destroy transmission. When will Ram learn to do proper engineering.
repairvehicle well they put in a motor they know will last 500k miles + so they need to build in failure points to keep people buying / repairing their trucks
Not on the 2012......
Need some help. So I’m new to the diesel work and I just picked up a 2010 2500 6.7.
I was planning on doing this delete but when I crawl under my truck and look at the area where the thermal bypass would be and there is nothing there. It’s just hard lines as far I can see. I’m looking in the same location that you’re working on in this video. And my trans looks like the 68RFE but it’s missing the thermal bypass. Any help or knowledge would awesome.
It's located on the passenger side and has 2 lines coming out of the trans, I just did mine was pretty easy,
hardest part was figuring out how to take the retaining clips out. Took about 30 minutes.
@@Juan4themoney so after doing a lot of research and asking questions. I found out that not all rams in 2010 had this new feature added. My lines are just hard lines with no bypass as that’s the older style before the bypass was introduced.
@@alanwright782 I was trying to remember what year they started doing the thermostat for the trans just couldn't remember. Consider yourself lucky I guess.
My 2012 6.7 3500 dually has an 68RFE and it DOES NOT have the block in it either. Straight solid lines all the way up to the cooler. What's the deal?
I have a 6-speed Auto Aisin AS69RC transmission in a 2018 3500. Do you have an install video for this trans
Mine is leaking at all 4 points, anybody have suggestions?
To tight? He was adamant about keeping it snug
need to take off your rear dif. cover. Banks have proved those flat back cover are bad for your rear gears
hello
It’s a shame you haven’t answered any questions about this video in years, i won’t be buying anything from ATS.
Sorry we missed your question. Unfortunately, we do not provide tech support over our TH-cam channel comments and highly recommend calling into our tech team with specific questions. How can we help you?
Don’t is installed this piece of crap your transmission wears out way faster
Don’t wiggle it too much otherwise your just playing with it lol