Review of Karcher Electric Pressure Washer | Karcher Cube | K1700 CUBE | Power Washer | Car Detail
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Is this a good choice for your car wash or auto detailing business? I take a look at the Karcher Cube K1700 and test the pressure and gpm that the pressure washer advertises against my own tests using a pressure washer gauge. I also adjust the psi and gpm of the unit by switching out different power washer nozzles from 15˚ to 40˚ and from approximately 1.5mm orifice up to a 3.0 Is this better than the 1600psi Ryobi Pressure Washer? Its hard to say, i really love my 1600psi unit from Ryobi (Model# RY141612) but this thing did perform amazing and has the ability to carry everything in its own storage area. Plus, Karcher has a great warranty and is readily available on Amazon!
See the items I use and join the mailing list at: www.DTLRsupply.com
Links to the pressure washers:
Karcher k1700 Cube: amzn.to/3aNNRGJ
Karcher k1700 (wheeled version): amzn.to/2yWXXIb
ITEMS TO UPGRADE YOUR PRESSURE WASHER:
My Pressure Washer Gun of Choice:
amzn.to/39OfXBw
UBERFLEX ProPulse 50' pressure Washer hose
amzn.to/38HtE5c
Foam Cannon:
amzn.to/3bLovLD
1.1 mm orifice for foam cannon
amzn.to/39K7nDT
Quick Connects for Pressure Washer
amzn.to/2SFKPhX
Pressure Gauge for Pressure Washer
amzn.to/3bTyrCS
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
#cardetailing #Karcher #PressureWasher
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).
Good info. I'm looking into my first pressure washer. I've seen the detailed OG reviews, but I'm glad that you are recommending some other options for accessories (gun, hose, foam cannon, etc) that aren't as expensive as what OG recommends. I'm just a weekend warrior and don't need the super expensive, high-quality stuff. I'm a new subscriber as a result of your helpful videos.
Awesome thank John! Yes the obsessed garage videos are great but I agree not all people need that level. I do this professionally and don’t have that stuff haha
I've been using this karcher unit for 2 years with no issues. Plus the pump sounds and seems more substantial than the Ryobi
Hey Matt, yeah the obsessed garage guys mentioned the same thing about the pump noise. Like i said, the first unit i got broke really quick but i think that was a fluke cause the second one worked amazing!
Biggest issue is the hose it’s so trash! And the gun is super cumbersome! Great video!
This is Exactly what I was searching for, thank you!
Good reviews thanks and i used to like it more than ryobi but since you reviewed the ryobi I just got it with amazing price from Home Depot now I hope you compare the 2 units
Good idea! I’ll look into it thanks!!
I second! 👍
Here is a curve ball. OG says 3.0 40 degrees = 1000 psi. You mentioned it's possible that gauges differ and what you experience is 850 psi and that is the perfect pressure. I have tried to use my 40 degree 3.0 Simson nozzle and it equates to 1000 psi. Tried a generic 3rd party nozzle from Amazon and it came close to 950 psi. I decided to purchase one more nozzle, an MTM rubber protected aqualine nozzle, same 3.0 40 degree and it's at 800 psi. I'm scratching my head. I have videos to prove it but at this point it doesn't make sense to me. I figured it would be 1000 PSI especially coming from MTM.
Which would you recommend,1700 or 1800,and any difference between the k1700 and k1700 cube as psi and so?
Thanks for all of the great videos. Loving the channel. Definitely making it hard to decide what PW to go with. I know you have a couple of mobile setups at this time, but what PW are you using in your shop? What kind of numbers are you getting? Output, PSI and GPM with what equipment? Thanks for your insight. Keep up the great work!
Nice review. It was hard to tell what the noise level was. Any guess? Did you feel comfortable using it without hearing protection?
Which one is better? This or the ryobi 1600?
Thanks for the review. I just bought one and it works as adversited. I had difficulties connecting my own hose the the unit- it leaked like crazy. Maybe you're really strong but I had to use a wrench and I stil couldn't get it tight enough. Any ideas?
Here we are at the July 4th weekend in 2023 and Ryobi has the 1900 PW on sale for $99 at Home Depot.
Thank you so much to the testing
This is exactly what I needed, thanks!
Anytime!!
The link for the foam cannon doesn't work anymore, do you have any other recommendations? I have a K1900PS
do you have the link to the foam canon
Excellent vid and info. I have the K1900 seems pretty good for detailing with a 2.5 orifice nozzle and some upgraded accessories.
if you don’t mind me asking, what upgrades did you do? I got the K1700 Unit with wheels for Xmas and wanna see what attachments I can get for it!
I brought one karcher 1700 and it was working perfect and suddenly stopped working and I don't know what happened any ideas about how to fix it?
Great video bro , it helped me a lot , I love detailing my car myself instead of taking it to a car wash , God knows what they gonna do to it . You mentioned about burning odor about the previous one you had , how long do you think this one is gonna last if someone has one ?
Do I need a pump if I'm using this with a water tank?
If I wanted to bump up the pressure a little, do you think that Ryobi 15 degree nozzle would do that?
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use th-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Nice video, just purchased mines today, are you using any more quick connects for the other lines? Or just for the gun?
The hell with the pressure washer...I want that car of yours!
Thanks!!!
Hello , what pressure washer you would recommend? I’m planing to be mobile soon
Good complete review.
I am interested in a small reasonably priced pressure washer to use occasionally.
I have never owned one.
How has this one held up over the past 3 years?
Of course i don't know how often you used it.
Thanks for the good review of this unit.
Hey josh. Thanks for all the great content. I did buy the cube through your link with all the upgrades. Very good, however, the water inlet threading is finer than the standard hose thread, so the quick connect doesn’t screw on all the way. Do you have a link for one that actually will fit this?
So both the k1700 and k1700 cube give the same psi and so on?
Thank you so much, Josh. In Australia, K1700 is not available. Pretty disappointing. Only K1800 is available. Which is better for my newly ceramic coated car - K 1800 Vs K4 compact? (or Bosch Home & Garden 1500 Watt Electric High Pressure Washer Cleaner 1820 PSI ?) Thanks in advance. Best Regards,
Just wondering if you tried the Ryobi nozzle on this one see if it gives the PSI a Boost? Thanks!
Splendid review sir
I can't find a foam cannon that works with the K1700 Cube, they all seem to require 2.0 GPM minimum. I've tried two foam cannon that were supposedly compatible and the machine keeps kicking on and off, and barely any foam comes out.
Is this related to the 1.1m foam cannon nozzle? The video doesn't mention it is necessary to function, just that it makes thicker foam.
Any recommendations for a foam cannon model that is known to work? Link to this video's foam cannon is invalid.
I’m having the same issue. I’ve tried some different oriffices w no luck
I can't find 2.5mm nozzles. Can you point me in the right direction?
Great video !! PS the link for snow cannon is broken 👎🏽
Thanks for the quality review!
My pleasure!
is there an extension u can get for the pressure gun u recommend? please send link!
My garden hose is on the side of my house. I have to use a 50ft hose. Will that affect the performance of the pressure washer?
No that shouldn’t be a problem at all
Is a 15 degree nozzle the same thing as 1.1 mm orfice ?
Great review brother thanks. Quick question, whats your dilution ratio for the soap. I get really runny foam on mine, still messing with it. Thanks
I just put in about 1/10 of the bottle.
Would u recommend this over the RYOBI?
Good review bro! I have the k1900 and I love it. How is yours holding up after 8 months?
Great! I don’t use it as much as my Ryobi but it still works great!!
It's Ryobi better? What model you have
@@imjoshv what lasts longer? My 240$ sun joe lasted me 1 summer
Do you have the name of the foam cannon It won't load up on your show more link in description
Does it take m22 14mm quick connect?
Hey fantastic review! I am about to order one of these but does the pressure washer gun you use need the quick disconnects in order to attach to the uberflexhose?
I’m pretty sure the karcher has standard connections so you shouldn’t need the quick connects
To connect from my water source my spout on the side of my house does it come with a cord to do so or is that something i have to buy separately im referring to the fist hose u connected the water source to the machine. No clue and new to power washing thanks!
You just need a hose!
what did you charge/or would you charge ?
Hey josh, could you put a foam cannon on the quick connect at the end of lance where you said the nozzle would go?
Nice review man. Are you replacing your Ryobi with this unit? I just purchased the K1700 cube and I am excited to get it.
Not yet, I am planning on setting up another mobile unit for my detail business so I’ll probably put the karcher in that!
Good review. Thank u.
Did you go through the warranty process on your first unit? If so was it a good experience? Thanks in advance.
I bought it on Amazon and they took it right back with no issues
Thanks for the beneficial review.
What diameter hose are you using? Does changing from 1/4 and 3/8 affect the psi and gpm?
And finally, does it look like this unit could be wall mounted?
Im using a 1/4 and no it does not afftect psi and gpm! just the nozzle does. For a wall mount, you could put it on a shelf... It has a plastic storage box on the back that isnt the strongest and with the way the on of switch is i wouldnt recommend it unless its on a shelf!
The video suggests buying a different hose. These are pressure hoses; where do you buy a suitable replacement, and for how much?
Is this better than the Ryobi 1900?
I just recently bought the ryobi 1600psi pressure washer, I don’t understand the difference between the two 40 degree nozzles. What’s the difference between a 2.5 and 3.0?
The 3.0 has a slight larger opening where the water comes out than the 2.5. Because of that you lose some psi but gain some flow
I bought the matcc foam cannon and a 1.1mm orifice and im not getting thick foam , still a bit too watery , any ideas ? Im using the 1700 cube with stock everything .. my garden hose is also long af (100feet i think) could a shorter one mean more pressure ? cheers
i dont think the 100ft garden hose should make any difference. What foam are you using? Also, make sure the dial on top of the foam cannon is tightened all the way down
amzn.to/3hrB7eo for best gpm!
amzn.to/3hfcwdR for best value
amzn.to/3dCBula best all inclusive kit
Did you get any leaks with the connections at all? Did you use any Teflon tape or something similar if you did? I just ordered a K1700 cube and want to get all the fittings and such aswell! Thanks!!
I did not have any leaks abd did not use any teflon tape. they have a rubber or ing in side the connections that do a good job preventing leaks!
Does switching to a 1.1 orifice on the foam cannon damage the Pressure washer as it increasing the psi?
That’s a good question that I never thought about before... the original nozzles the pressure washer comes with is pretty small so it not too much of a drastic change... it probably does bump up the amperage a little bit cause it draws a bit more from the machine. With that said, I have never had any issues with my pressure washer because of it. You really don’t use a foam cannon for that long so any potential harm would be very minimal
Nice unit. Which one do you recommend in terms of psi & GPM the Ryobi or Karcher? Thnx and congrats on the new unit.
Honestly they are just about the same... I am sticking with Ryobi for now because I’ve use my a lot and it hasn’t let me down yet. But the karcher is a great little machine
Yea im stuck in the same spot! I have the ryobi 1600, but want to get the k1700 and a matching kärcher vacuum lol. But ryobi readily available in case I need to replace the unit under warranty. I hate decisions 😄. (How many gpm did the ryobi do with the 40° nozzle?)
Great video! Thanks for all the links and info you provided. Questions regarding your source of water. I see that you have the water softener. Is that recommended for washing cars at home? Our water is pretty hard and I’m wondering if that would make much difference. Thanks in advance!
You can definitely do it without it, but you want to be careful of water spots so i would only wash the car in the shade and works fast so the water doesnt dry on the panels.
Does the Karcher have the M22x14?
You can get this pressure washer with a little more psi and gpm. Up to 2000psi and 1.3gpm if I recall. Is it worth it for cleaning up around the house? Think it adds about $100 too.
Yea!
Thanks a ton for the hose rec!lll
On the obsessed garage review they got 1000 psi with the 3.0 nozzle. I know the gauges can be off but do you think that's the culprit for the difference in your test and theirs? Just trying to decide on 2.5 vs 3.0
Yea most likely... gauges can vary.
I bought the k1700, the one with wheels, I wanted to do the "bleeding" process to get the air out of the pressure washer but water won't run through the machine, I though I had enough water pressure from de garden hose, I seems I was wrong, do you know what's the minimum psi needed for these machines??
It shouldn’t be much at all... keep trying to purge the air. It will get out eventually!!
Or maybe the unit you got it bad??
@@imjoshv I thought that too, the one I have is a replacement hahaha, I told them the first one was defective lol and I got a replacement.
I'll try adding a small "pressurizer pump" and see if that does the trick.
Ty for your reply.
I still don't know if I should buy a karcher or sun joe, any recommendations ?
Honestly I’ve never used a sun joe.... I know Home Depot had the typo I 1600psi on sale for $68. That’s my go to pressure washer
Did you buy the 3.0 40 degree nozzle separately, or does it come with the unit?
I have bought them separately. I do t remember if that unit come with a 40 or just a 15... but if it does it’s a smaller orifice size and I like the 3.0 to increase the water flow
Can you post the link where you bought your 3.0 40 degrees nozzle? Thanks!
Wanted to see the soap dispenser. Does that soap solution get used first and then back to just water?? I guess i will just try and use mine and see how it goes.
Hi yea sorry i didnt even test that. I always recommend a foam canon over the soap dispenser so i didnt even mess with it.
Does this have the M22x14?
So you don’t use any wand in your combo, and if so what do you use with the aftermarket gun?
I don’t use a wand. I just have quick connect straight to my nozzle!
@@imjoshv gotcha, last thoughts on this gone with the QC does it swivel at all under pressure? Or do you specifically have to look for a gun that does that?
thanks for the video. I have a 2300 ryobi unit a friend gifted to me after he went gas but I find it a bit cumbersome. Initially was trying to get the smaller ryobi units until I saw this on OG. I liked the smaller footprint as I'm trying to organize my garage into a more functional space. Great info for the weekend warrior plus it's on sale right now too.
Yea I like the compact size of these as well! I just picked up the 2300 to review!!
I just bought the Karcher Kit from Obsessed Garage...it hasn’t shipped yet and I’m torn wanting the expensive Kranzle. After 3 weeks of use are you still enjoying this unit? Will it clean anything you throw at it for the most part? Great video btw.
Hi, yea it’s a great machine! You can definitely get more powerful machines but this one is great too! Definitely change out the tip so you get more flow. Obsessed garage mentions that flow is more important than psi. Obviously you need a balance but with a 3.0 or 3.5 nozzle 40 degrees you should perfect
Thanks for the reply! What is your favorite pressure washer right now?
Any of the karcher units will be more than suffice. Unless you need for use everyday the karcher will do everything a kranzle can do. I would rather save the money and use it on other tools and supplies you will need.
Will all of the accessories linked here for car washing and detailing also work with the Ryobi 1600? Also, can you provide the exact name of the Ryobi you have - checking at my local Home Depot.
Yes they will! I have a few of the Ryobi units but this is the 1600 i have: www.homedepot.com/p/RYOBI-1-600-PSI-1-2-GPM-Electric-Pressure-Washer-RY141612/301004462?MERCH=REC-_-searchViewed-_-NA-_-301004462-_-N
Nice vid! What's the stock size quick connector coupling for this Karcher Cube? Is it 1/4"?
I dont remember the size but its a standard fitting!!! Same as what you would use on a ryobi unit. It should be linked in the description!
LOL this is the million dollar question nobody seems to know the answer to. Ive read m22 15mm, while anther guy says m22 14mm, now its a standard fitting (hilarious answer lol). There is no standard fitting. Ah well
@@thepunisherdarts2123 I ended up buying a Sun Joe that stated m22mm-14mm so I could buy an uberflex hose lol.
Do you have hard water where you are?
Curious if you are able to get those results with hard water or are you using a softener?
Yea we do.... I am using a spot free system for my water!
IMJOSHV - Car Detailing and Reconditioning Tips Thank you, I suspect that might also be why you get the better foam. Or is there not much of a difference?
@@samsmederovac9672 no the water has no difference... what pressure washer are you using and what is the psi and gpm rating? you probably need to change the orifice on your foam cannon. ill do a video on it soon! But this is the piece you need amzn.to/39K7nDT
IMJOSHV - Car Detailing and Reconditioning Tips I’ve pretty much copied your setup with the Ryobi and the smaller jet for the gun just waiting on all the pieces to arrive. From what I’ve read there seems to be some that believe the softer the water the better the results out of the foam gun. It be cool to see a comparison of that. Thanks for the tips and videos it’s been steering me in the right direction.
Does the foam cannon work with the stock gun?
I dont remember for sure.. But i think with the karcher it does! It should be the same quick connect
I'm JoshV :). Good review.
Hi Josh! In your experience is it true all that stuff about washing a car with just a pressure washer? I mean with no rinse at all with a microfiber wash mitt? Is that posible?
Great video! This washer is perfect for me since I wash my truck so infrequently. Question, the purple gun you linked in the description comes with a foam cannon. Would that one be fine? The deal is pretty sweet but I understand you get what you pay for. Thanks, Eric
Yea that should be fine! Mine is a cheapy off amazon too! Just make sure to swap out the orifice with a 1.1 mm to get way more foam! That should be linked in the description as well!
Where is the unit made? Also great video, I like that you used a gauge to determine the true PSI!
Thank you!!! I’m not sure where it’s made
Germany I think
Italy made
does that washer gun hook right up to the stock hose?
Yes it does
@@imjoshv awesome thank you. Great video
👍👍
Very nice review (y)
Thank you!
I have a kartcher presser washer but it is a bit different
Yea they have a lot of different models
Is this the same as the 1710 cube?
i believe there is a slight difference, but the internals are the same so it would be the same performance
Can you use this unit with a water tank?
Sure can! Just have to prime it like the others!
This is for hot or cold water?
Cold
Can this unit be gravity fed ?
Yea I don’t see why not!
Also, what about cleaning concrete?
I haven’t done it but it should be enough to power one of the floor cleaning heads! It will work for everything, you just may need to move it slower. Also the tips that is good for cars May not be the best choice for concrete so just keep a few different tips
If i purchase the hose you recommend, would i still be able to connect it to the machine? Universal fit? Thanks mate.
Yea that hose works on that machine! A few brands like sun joe need an adapter, but the karcher fits it!
IMJOSHV - Car Detailing and Reconditioning Tips thanks boss!
When you do a GPM test, remove the tip and just test the flow into the bucket without it. This will give accurate results.
I like to test the usable psi and gpm, if I remove the nozzle completely then it’s the same as just using a hose that would get the same psi but even more gpm. Thanks for the input though! I appreciate it
Great video!, what size are the quick connection nozzles, 1/4" or 3/8" ?
I can’t remember off the top of my head but I have the quick connects linked in the description of the video!!!
Has it given you any problems yet? Also can you use a foam gun with the default gun.
no problems! And yeah you can use the factory gun with a foam cannon! But you can also get a pretty cheap solution here: amzn.to/3skv0fZ (make sure to also order the 1.1mm orifice) amzn.to/39K7nDT Heres a video about the smaller orifice th-cam.com/video/KUfU8-kjpyk/w-d-xo.html
What soap did you use
I use this: amzn.to/3dm9KzA but the main thing with it is that i changed the internal orifice on the foam cannon to this 1.1mm orifice amzn.to/39K7nDT Makes all the difference!!!
@@imjoshv I think it's my foam cannon doesn't work well because I use a 1.1 orifice.
Too bad we dont have this model in europe
Hi! Please review the new CAT pressure washer 1800psi 2gpm, love the size of it. Can’t find any reviews yet. Thanks.
I did a google search for it but couldn’t find anything.. do you have a link to it?
Here’s the Amazon link. www.amazon.com/dp/B0856YWWDR/ref=cm_sw_em_r_mt_dp_U_e0ATEb0Q9GF38
JB357 well that’s an interesting little unit. Why does this always happen, I get set on something and immediately I see something else and I’m like hmm.. lol. It claims to have a 2 year warranty. I’m interested in it but I bet I’ll go with the Karcher for now. It’s proven and the CAT is brand new
JB357 also the Karcher is on sale at Lowe’s for $102. Half the price of the CAT currently.
www.lowes.com/pd/Karcher-K1710-Cube-1700-PSI-1-2-GPM-Cold-Water-Electric-Pressure-Washer/1000225617
Nathan Bunn Yeah, interesting little unit but for $200 I won’t bother.
But fortunately, upon further seeking, found this unit with same exact specs with CAT, in fact, same seller, just different brand at a lower price! Active VE52. For a small difference from K1700 cube with much more GPM, I don’t mind spending a little bit more. I’m wondering if putting 3.0 orifice nozzle on it, what will be its output psi and gpm. Since most of them don’t actually true to their ratings.
I just hope someone will find time to make a review on this since this just been in the market for few months. Thanks.
Worked pretty much as expected🌼 allabout.wiki/SPX3000 Former machine was a 2700 psi gas machine. This has much less force but better control of spray and easier to get on roof with! Been working it steady now for a week, roof and siding. Starting deck today. So far so good