2000 Yamaha Virago 250 XV250, Part 6 carb disassembly and ultrasonic cleaning

I take the carb off the 2000 Yamaha Virago 250 XV250 and break it down then put it in the ultrasonic cleaner. I actually made a follow up video to this: • Yamaha virago 250 xv25...
Use this link below when you shop on Amazon and it will help fund my channel!! It won't cost you anything and everything will look exactly the same !!!
------- My Amazon Affiliate link!!! amzn.to/301x7sn
------
Playlists you may be interested in!!!
1979 Triumph Bonneville T140d Special, back to life !! -- • 1979 Triumph Bonnevill...
1983 Honda CB1000 Custom, back to life !! -- • 1983 CB1000 C - back t...
2000 Yamaha Virago 250 xv250 V-Star 250 back to life !! -- • 2000 Yamaha Virago 250...

[@rocketmaam6898]

Ran into same issue with screws. Someone said it above, these are JIS not Phillips. Stripped mine completely round. Bought screw extractor tool and got them out. Bought all new M4 screws and new JIS screwdrivers. Thank you. This video was helpful.

[@jaredmcquiniff5362]

If you don’t use a Japanese screwdriver, they strip right out! Amazon sells JAS screwdrivers for Japanese Phillips screws. It’s amazing how well they grab the screws!

[@fujitsubo3323]

JIS*

[@rogerickbarnes3919]

I was a little concerned about the sparks around gasoline..

[@christopherbrodeur2333]

Your going to put that screwdriver right through your hand. Hold it from the opposite side.

[@christopherbrodeur2333]

What about shock tapping each screw and using a set of needle nose vice grips sideways on those stuck screws to break them free ?

[@k_xx]

The noise from the ultrasonic cleaner is unbearable, even hearing just through headphones... Love this series btw!

[@kailen122]

Do you know what the float height is supposed to be?

[@antonnarnickis6675]

I used my torque to undo those bloody screws 😄

[@meganowens4553]

What does the slide and spring mod accomplish?

[@paultiffin330]

Hey there, what capacity size in litres is your ultrasonic cleaner? Looking to get one but looking for a reference for size.
Regards
Paul