Making A Circular Protractor For Homemade Lathe Milling Attachment Compound Slider
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- #MakingCircularProtractorMillingattachment #mrranyhomemade #homemadelathe
Making A Circular Protractor For Homemade Lathe Milling Attachment Compound Slider
New projects homemade lathes bed (second lathe)
Hello TH-camr, today I’m glad to share my new second homemade lathes.
I do happy to make a bigger size because my first lathe the size is a bit small, when milling a big plate of thick metal is not easy because the length is not enough space to milling than the plate metal I used is thin most are 10 mm thick.
So I decided to make a new lathe bigger than the previous lathe. Now there is enough experience to make a new lathe also.
I hope you all enjoying my new lathe from part 1.
• Awesome Homemade Lathe...
• Making Homemade Lathe ...
• #Diy #Craft #Tools Do ...
• Homemade Lathe Machine...
• Awesome Cutting slider...
• #homemadecuttingslider...
Dear all beloved fans and subscribers,
Welcome to my channel Mr.Rany Homehome.
Today, I have new video about:
I would like to show you how to make local furniture made of steal, iron, wooden products. Hope you enjoy watching my activity.
-Awesome ideas
-Tips
-Craft
-How to make
-Create Ideas
-DIY
-Life Hack
-Others
Please help me to like, comment,share and subscribe my channel to reach my goal 100,000 subscribers.
With regards
Mr.Rany Homemade
Show Amigo Parabéns Gostei
Thank my dear friend
I love your work sir, it's okay to not explain anything
very good. I can hear the thunder from the gods. Did you get any hydraulic oil to keep your equipment from rusting and wearing down?
Many thanks I appreciated for your explanation. Hard work to make these because I don’t have any professional machine my in my shop all by hand I do have welder, small drill grind engle cut to make some machines and tools. In this time I have to build everything encourage is the best. I think see too slow but will try my best.
Oh you good idea let me know what kind of Hydraulic for protection? I never know and do you have name brand?
After the sundered heavy rain and windy and lightning too after rain some trees and banners failed and killed a few people too
Thanks again 🙏
@@mr.ranyhomemade2466 you don't need a name brand you just need something like a 0w-20 weight or 68 hydraulic oil. Most hydraulic oils are the same and they are way better than motor oil.
Thanks for your recommendation
0w - 20 weight or 68 hydraulic oil I’m not sure how can I found here or not.
Nice show
This is interesting to see, how you create something with what you have.. 😊 The idea is DIY simple, the only problem was you didn't have a spindle lock and it was moving a bit while cutting, otherwise it would be awesome precise for a homemade shop with little tools inventory. Otherwise, you can make a very simple degree caliber at home like this:
1. you cut and turn a disc of 229,2 mm diameter (equals to 720mm fi, which doubles your precision)
2. you attach on the external border a flexible measuring tape of 720mm to circumference
3. each 2 milimeters on the scale is one degree, which makes you able to scribe (engrave) to a half degree precision
4. don't forget some fixture to lock the spindle while scribing.. 😏
Also to facilitate your work, you can scribe with the cutter from the edge inwards, checking easier your depth for 5 and 10 divisions.. At the end you sand it lightly to remove the burrs, clean it, smear some blask paint over the engraving, leave it to dry, sand it lightly again and you will have black engraving on shiny metal. 🙂 Keep on!
I've also seen it done with an old cam belt from car engine.
You can count out the 'teeth ' and use a circle cut from old piece of furniture, (chip board) plywood, etc.
Put cam belt so teeth are on 'outside' and drop a shaped piece of wood in to lock things in place (with some sort of hinge so it is always same location on head stock)
Best best best
Molto interessante
If your carriage would have been able to travel across the entire face of your chuck you could have done perfectly perpendicular cuts across your gauge. One degree then all the way across to the opposite degree in one pass
I’m not yet build headstock and Chuck because I’m thinking different kinds of them what I want, now I do need finish cross slider and compound Slider
When can we see the lathe?
Thanks for your best time to watch I do hope you enjoyed. I’m not sure how long. I haven’t enough equipment to build it very difficult looking for, otherwise everything I did mostly by hand, for the video you seen are looking okay but behind the scenes very hard work because I don’t have tools as much.
Thanks I appreciated your asked
good job it would be good if you had a way to lock your chuck when marking it after the lathe, a milling machine then a surface grinder then you can make anything you want.
Many thanks I appreciated for your explanation. Hard work to make these because I don’t have any professional machine my in my shop all by hand I do have welder, small drill grind engle cut to make some machines and tools. In this time I have to build everything encourage is the best. I think see too slow but will try my best.
Thanks again 🙏
@@mr.ranyhomemade2466 yes I am in the same boat as you
I love your videos man. Outstanding work!
Many thanks I appreciated for your explanation. Hard work to make these because I don’t have any professional machine my in my shop all by hand I do have welder, small drill grind engle cut to make some machines and tools. In this time I have to build everything encourage is the best. I think see too slow but will try my best.
Thanks again 🙏
The amount of effort that you are putting into it, man, you are crazy!! I can't wait to see how it will machine
Olá amigo, deu trabalho mais ficou perfeito!!!
Grande abraço e tenha muita saúde e cada vez mais sucesso!!!
Obrigado, meu melhor amigo, meu verdadeiro trabalho é a mão, agora estou preso porque o alumínio não consigo descobrir, preciso do controle deslizante transversal da roda e do controle deslizante composto. é o meu trabalho duro obrigado
Olá meu amigo@@mr.ranyhomemade2466 , tenho certeza que vai achar o melhor jeito para seu projeto!!!
Abraço e boa sorte sempre com muita saúde!!!