Im wondering if this brake kit would bolt up on a Sonata N line? Im at 375hp and I know im at the edge of the stock brakes! The ones you took off look just the ones I have on my 23 N line so Im hoping they might fit! Will you put up all the part numbers Please?
2017 to 2019 g90 fit perfect i have these already, i was going to buy these from sxth myself but they just take way to long to shipp ,got them in a week from korea myself by a great vender
Looks sick. I'm sure they perform great too. Though the calipers look massive for only a 4-pot setup. It also sucks you can't pull the pads out from the top of the calipers, and have to pull them every time to swap pads. I would highly recommend you get yourself a spool of mechanics wire, so in the future when you swap pads or rotors you can hang the calipers with the wire (just loop some around the spring or shock assembly) and not kink, or put tension on the brake lines. Also, what's the rotor size on the upgraded brakes? And what brake fluid you use?
Appreciate the feedback! 🙏🏽 I have some wire we use for plumbing that I could have used but was being lazy and figured I was replacing the line anyways. But I will do that on the next one for sure. Rotor size is 340mm and Hyundai included oem dot 3 brake fluid.
@@KDMStation I highly recommend you upgrade your brake fluid to something like a Motul RBF 600, or 660, or 700, or Torque RT700, or even a Castrol SRF (if it's safe to run silicone based fluid in your vehicle). You will notice a difference in brake performance, brake pedal feel and responsiveness, and clutch pedal feel/responsiveness. Especially in higher temp day driving, or track days. I even noticed a difference in my family daily's like my Mazda CX-9 when I switched it to Motul RBF 600. These racing brake fluids are a little more hygroscopic (they absorb water), than regular brake fluid. So try not to expose it to the atmosphere for longer than necessary, and check the fluid with a brake fluid tester more often, like once a year or so for daily driving, and before and after every track day event.
There is a 6P caliper that looks exactly like the 4P. I think it was made this way to lower production costs. N 4P brakes are not popular in Korea. This is because it is heavy, large, and has poor performance compared to the price. AP RACIN, BREMBO are popular. We install many domestically produced neotechs at low prices.
Does this provide a legitimate performance benefit? It looks cool but the stock brakes are so large to begin with I struggle to see them fading even in extreme conditions.
Some have hit the limits of the stock brakes at the track. I’m still not at that level for tracking but these do provide a pretty big difference in bite over oem.
It's not much different performance wise, but math already really told us that. The BBK actually decreases clamping force with multiple pistons. But the tradeoff is the surface area is increased, so it dissipates heat beater. Slowing down a car is converting forward energy into heat... But it holds true in the real world too. My friend got them for his Kona N, the performance difference from an upgraded stock N setup (DBA rotors, pads, and stainless brake lines) isn't much. The big difference I noticed was the brake fade overtime is much improved, if honestly not a thing... IMHO it's not worth the cost unless you live next to a track were you can take advantage of them. Other problem is the only place you can get pads for them is Hyundai Korea... There is little aftermarket support in the way of rotors or pads... Another thing to note that you have to have a floating rotor since it's a fixed caliper vs the stock floating setup, prevents what's called coning.
We did and the oem were lighter by around 2lbs lol these things are pretty heavy for sure. And It’s a big improvement. I did a slight overview of how the perform over stock. But as to date they are flawless. The brake pedal takes less travel to really start stopping compared to oem.
So everything knows(i weighed everything) OEM caliper is 15.22 lbs. And OEM rotor is 26.9 LBS. Meaning even though this kit is LARGER and with more pistons...its actually lighter than OEM!
These look mean af H. Just badass brutha. I can see this vid being another great N community asset for DIYers. Great job and I’m assuming Em luvz the way they turned out and curious how people will acclimate to increased bite of these monsters. 🤘🏽🤙🏽✌🏽
@@KDMStation I bet it’s gonna be amazing after some time with em on the daily. Gonna be amazing next track day for ya and for us to get ur vid on how it went. ✌🏽
@KDMStation I'm not referring to the install I'm referring to the changing of the pads the availability of the pads unless you are going to track that car hard-core not worth it
As ugly as original N calipers are they never were a problem on track. Your only increasing weight and with your driving ability and such a low horsepower car you will see zero track benefit. It’s just silly. Those calipers would be good for a car making 500 plus horsepower at the wheels. The Elantra is a slow underpowered car, yes I own a Elantra and Kona N, the stock calipers will outperform the driver and horsepower of car.
If you would have even listened to the first 1 minute of the video you’d see I covered exactly that. Lmao. This a great kit for people who daily drive and do spirited driving. The 60-0 is far superior over the stock set up alone, which for daily driving is one of the best things you can have.
Low hp and 300 hp in the same sentence 🧌...you do know this car is tuned, right🤔...also it's surely to get the upgraded turbo kit soon, so do EVERYBODY a favor, go back to Trollville and lay down next to your bowl❗️
Im wondering if this brake kit would bolt up on a Sonata N line? Im at 375hp and I know im at the edge of the stock brakes! The ones you took off look just the ones I have on my 23 N line so Im hoping they might fit! Will you put up all the part numbers Please?
I always ask the same questions and I have the same car 2023 sonata n line and I swear they read n line and ignore us cause we not a full n
@shawn4063 very true!
It's impossible to mount.
Where did you order these from?
Where would you purchase rotor ring replacements?
2017 to 2019 g90 fit perfect i have these already, i was going to buy these from sxth myself but they just take way to long to shipp ,got them in a week from korea myself by a great vender
hi, can you please tell me where and from which dealer you bought the brakes?? they don't have them on sixth element anymore..
From where @opadilla123
I didn’t buy these. I won them at the hyundai driving experience.
@@KDMStationdamn congrats but asking opadilla
You mean the calipers from a g90 fit the elantra N...or the Pads from a g90 fit these calipers?
Where do you buy this? Have you a link?
I'm looking to get these brakes as well. Can you please let me know where you got these from? Did you order them at a Hyundai dealership?
Looks sick. I'm sure they perform great too. Though the calipers look massive for only a 4-pot setup. It also sucks you can't pull the pads out from the top of the calipers, and have to pull them every time to swap pads. I would highly recommend you get yourself a spool of mechanics wire, so in the future when you swap pads or rotors you can hang the calipers with the wire (just loop some around the spring or shock assembly) and not kink, or put tension on the brake lines. Also, what's the rotor size on the upgraded brakes? And what brake fluid you use?
Appreciate the feedback! 🙏🏽 I have some wire we use for plumbing that I could have used but was being lazy and figured I was replacing the line anyways. But I will do that on the next one for sure. Rotor size is 340mm and Hyundai included oem dot 3 brake fluid.
@@KDMStation I highly recommend you upgrade your brake fluid to something like a Motul RBF 600, or 660, or 700, or Torque RT700, or even a Castrol SRF (if it's safe to run silicone based fluid in your vehicle). You will notice a difference in brake performance, brake pedal feel and responsiveness, and clutch pedal feel/responsiveness. Especially in higher temp day driving, or track days. I even noticed a difference in my family daily's like my Mazda CX-9 when I switched it to Motul RBF 600. These racing brake fluids are a little more hygroscopic (they absorb water), than regular brake fluid. So try not to expose it to the atmosphere for longer than necessary, and check the fluid with a brake fluid tester more often, like once a year or so for daily driving, and before and after every track day event.
Can you fit the same on elantra limited non N?
why did they make a 4 piston the size of a 6 piston.. added so much weight and size lol
They say it’s for cooling purposes and removing brake dust lol. Not sure how true it is but I do like the design of it 😭
There is a 6P caliper that looks exactly like the 4P.
I think it was made this way to lower production costs.
N 4P brakes are not popular in Korea.
This is because it is heavy, large, and has poor performance compared to the price.
AP RACIN, BREMBO are popular.
We install many domestically produced neotechs at low prices.
Does this provide a legitimate performance benefit? It looks cool but the stock brakes are so large to begin with I struggle to see them fading even in extreme conditions.
Some have hit the limits of the stock brakes at the track. I’m still not at that level for tracking but these do provide a pretty big difference in bite over oem.
It's not much different performance wise, but math already really told us that. The BBK actually decreases clamping force with multiple pistons. But the tradeoff is the surface area is increased, so it dissipates heat beater. Slowing down a car is converting forward energy into heat...
But it holds true in the real world too. My friend got them for his Kona N, the performance difference from an upgraded stock N setup (DBA rotors, pads, and stainless brake lines) isn't much. The big difference I noticed was the brake fade overtime is much improved, if honestly not a thing... IMHO it's not worth the cost unless you live next to a track were you can take advantage of them.
Other problem is the only place you can get pads for them is Hyundai Korea... There is little aftermarket support in the way of rotors or pads... Another thing to note that you have to have a floating rotor since it's a fixed caliper vs the stock floating setup, prevents what's called coning.
Do those fit the Kona N?
I’m not sure if the Kona n uses the same mounting bracket as the Elantra N and Veloster N.
Where can you buy these at
Im wondering the same thing
is it lighter overall compared to the stock one?
I’ll weight the stock rotors and calipers but the bbk caliper is definitely heavier than the oem calipers.
Did you weight the oem caliper as well? Also how is the braking performance compared to stock.
We did and the oem were lighter by around 2lbs lol these things are pretty heavy for sure. And It’s a big improvement. I did a slight overview of how the perform over stock. But as to date they are flawless. The brake pedal takes less travel to really start stopping compared to oem.
Where i can get that kit for ma Sonata N Line 2023?
I don’t know if these fit the sonata n line. You would have to try and see if the part numbers for the brake brackets are the same.
Hii nice ride man 😊
Do you have links for the brakes?
Unfortunately these are only available through sxth. I don’t have link but they do have them up on their site! 🙏🏽
@@KDMStation Thanks man 👍
@@KDMStation Looks like Sxth stopped carrying the brakes. I can't find them anywhere else.
Wow they came out beautiful. Did you have to get these imported from South Korea ?
The Hyundai driving experience team brought these over from Korea when we went to the event 🙏🏽
@@KDMStation oh nice that’s good to hear. Would you say that the brakes are worth it? I’ve been debating on purchasing them from SXTH element
Sxth takes to long to get these to your door look around these can be purchased from another vender i did it myself and got them with in a week
Those brakes are nice!!!
Thanks Dougie 🥺❤️
@@KDMStationwhere can I find those brakes
Nurburgring lap time? 45mins?
44:59.98
@@KDMStation faster than the Elantra N: 69 mins 43 sec.
It would've been cool to do a 60-0 stock vs the N performance brakes. I'm sure they stop waaaay better.
We can still definitely do that with another Elantra n that has stock brakes to get good comparisons
@@KDMStation ...
Bad ass parts for a bad ass whip
Thanks Derek 🥺🙏🏽
So everything knows(i weighed everything) OEM caliper is 15.22 lbs. And OEM rotor is 26.9 LBS. Meaning even though this kit is LARGER and with more pistons...its actually lighter than OEM!
got me some brembos on mine
Wow looks nice
These look mean af H. Just badass brutha. I can see this vid being another great N community asset for DIYers. Great job and I’m assuming Em luvz the way they turned out and curious how people will acclimate to increased bite of these monsters.
🤘🏽🤙🏽✌🏽
Appreciate it Jasen 🙏🏽 yes she loves them! She said the braking has been amazing so far.
@@KDMStation I bet it’s gonna be amazing after some time with em on the daily. Gonna be amazing next track day for ya and for us to get ur vid on how it went. ✌🏽
This was helpful. I am getting ready to install the Stolz kit on my EN and make a video for the US market. Hopefully, I don't screw it up to bad
More parts for the us market is always a good thing. Appreciate you taking time to do that. And I’m glad the video is able to help in anyway 🙏🏽
I don't think its worth it imo for the hassle
There was no hassle though lol. It was a really easy install. Got the job done within 2 hours
@KDMStation I'm not referring to the install I'm referring to the changing of the pads the availability of the pads unless you are going to track that car hard-core not worth it
As ugly as original N calipers are they never were a problem on track. Your only increasing weight and with your driving ability and such a low horsepower car you will see zero track benefit. It’s just silly. Those calipers would be good for a car making 500 plus horsepower at the wheels. The Elantra is a slow underpowered car, yes I own a Elantra and Kona N, the stock calipers will outperform the driver and horsepower of car.
If you would have even listened to the first 1 minute of the video you’d see I covered exactly that. Lmao. This a great kit for people who daily drive and do spirited driving. The 60-0 is far superior over the stock set up alone, which for daily driving is one of the best things you can have.
Low hp and 300 hp in the same sentence 🧌...you do know this car is tuned, right🤔...also it's surely to get the upgraded turbo kit soon, so do EVERYBODY a favor, go back to Trollville and lay down next to your bowl❗️
Obligatory, yes I own a Elantra and Kona N… instant cred.
Why does it even matter what the caliper looks like 🙄
Yes the base elentra looks uglier. We'll see how the N looks. But I've always been a fan of the 22-23 look.
What😋🤔🙄
those brake covers are ridiculously oversized, what is Hyundai doing lol.
Thankfully they aren’t brake covers but an actual 4 piston caliper 😭
@@KDMStation yeah I know but they are ridiculously oversized. Imo