@@patrioticgunner8034 mine had 230.XXX when I sold it. It was running fine. I worked at Honda at the time so it was easy to keep up with the maintenance. The only thing that went out was my P.S pump which I rebuilt. For $60. As long as it has been taken care of and maintained you should be fine for atleast another 100k Miles. And the jdm k24’s are pretty cheap
Got a 2005 2.4L with a 1.5" and a 225/70/16 KO2s,and if anybody ask's 225/70/16 is the max what u Can put on without any rubbing...if the tail isn't saggy they will fit without any lift. I still wanna go higher,i'm thinking about 3"lift and a 235/75/16 with spacers.
@@jonathanamador7748 y qué tal te fué? yo quiero una Honda CRV para un trailer de 1200-1500 lbs aprox, crees que sea suficiente? gracias por tu respuesta!
@@jonathanamador7748 and what rims? These are the exact rims I want, can't find them anywhere with 5x11.3 bolt pattern. Thanks again and looking forward to more videos.
Hey man, what is needed to make the crv run right with a 2” lift spacers? I know I mention about getting oem axles due to vibrations but what else is needed? Sway bar link? Ball joints etc? Do u think the engine and trans works harder due to bigger tires and taller height? Thanks
OAK’S GARAGE I only added one camber bolt to the passenger front side. Other then that my alignment was all good. And you will obviously lose some mpg. I'm getting 19mpg city which I don't think it's bad for having the size tires that I have...
Hi again, any steering wheel vibration when going 70mph or higher? I have 06 honda crv, 2 inch lift kit, 15mm hub centric wheel spacers in the front, 225/75/16 tires and I am experiencing steering wheel vibration now, any thoughts?
Hey, the Only time I had vibration issues is when I replaced my torn axles with aftermarket axles. Then I purchased some oem ones and it went away completely
@@hegotgame8 I work at Honda so I got them both for about $800 with my discount. We have payment plans so I did that. I tried 3 different sets of autozone axles and they all vibrated
@@jonathanamador7748 I have a 2nd gen crv, 225/75/16 with steel rims and a 2 inch lift. When I put the jack next to the lower control arm and lifted the car on the frame of the body the wheel and rim are heavy that it stretched the cv axle and busted it. I tried other points but the cv axle is being stretched any ideas/thoughts of where I can safely lift it?
Manuel H no problems. they are oem. When I first bought the crv the boots were torn so I purchased aftermarket front axles (autozone and O'Reillys for the lifetime warranty) and it was shaking so I had to buy original axles.
Jesse Bober I got the lift spacers from a store on eBay and I Got the bull bar and basket on Amazon. And I got BLESSED and found the body trim at a local junk yard for $40! The body trim goes for $500 brand new. and it has a U-haul hitch.
That's sweettt, the body trim looks good, I don't see them very often on CR-Vs. Good snag. I want to do the 2" lift, get wheel spacers, and all-terrain tires on my stock rims for right now. What brand was your lift kit? and what size are your wheel spacers?
Jesse Bober www.ebay.com/itm/2-Lift-Spacers-for-2002-2006-Honda-CR-V-RD4-2-F-1-R-SET-Made-in-USA/263888318559?fits=Model%3ACR-V&hash=item3d70f8305f:g:X8QAAOSwiFtbealN Where do you stay at? I'm in CA. I might same mine. I want to get the 1" instead of the ones I have
I'm in NorCal. Thanks, man, I appreciate it. But I'm still debating on what size I want, I don't want to have to modify too much of the suspension or cause any issues. Still doing some research.
Sickest gen2 thus far.
Shamari Henry thanks man
I love this gem of crv
Looks great, wich kit did you use?
I wanna do the same with my 2005 CR-V EX 😃👍🙌
Thanks, check out my other videos. The company is called aerogenics. Or something very close to that. Purchased them YEARS ago
Where did u get the fog lights
Is it good to buy a 2001 Honda CRV with 200k miles? If yes,much more years u think it got in it?
@@patrioticgunner8034 mine had 230.XXX when I sold it. It was running fine. I worked at Honda at the time so it was easy to keep up with the maintenance. The only thing that went out was my P.S pump which I rebuilt. For $60. As long as it has been taken care of and maintained you should be fine for atleast another 100k Miles. And the jdm k24’s are pretty cheap
These last forever no matter what u do to it
Got a 2005 2.4L with a 1.5" and a 225/70/16 KO2s,and if anybody ask's 225/70/16 is the max what u Can put on without any rubbing...if the tail isn't saggy they will fit without any lift. I still wanna go higher,i'm thinking about 3"lift and a 235/75/16 with spacers.
Imma copy this. Looks great.
copied it, mine looks better lol. hey how many front axles have you gone through??
Lol, I’m planning on doing a 1.5 inch lift on mine how many axles have u gone through
@@marcorivera323 you might be okay with 1.5. I did 2” because it was more available and cheaper.
Maybe 3 axles haha.
Hola, has remolcado algún trailer? Cuánto peso y qué tal te ha ido? Está hermosa!
@@emontoyab Una trailer de 600lbs
@@jonathanamador7748 y qué tal te fué? yo quiero una Honda CRV para un trailer de 1200-1500 lbs aprox, crees que sea suficiente? gracias por tu respuesta!
@@emontoyab no estoy seguro. No tenia in rayador para la transmission y la Mia era manual 5-speed
What model, Brand are those wheels and rings, thanks dude, beautiful car
Thanks. Check out my other videos. All the info is there
@@jonathanamador7748 thanks man
What size tires you got on ? And where you get that front grill and
Lights from !???
Ameng Gipson check out my other videos and the comments. I have that info there
Looks awesome!
What size of tires are you running? Thanks
the. malinski thanks man. They are 235/75r15's. Tires are bf Goodrich AT
@@jonathanamador7748 and what rims? These are the exact rims I want, can't find them anywhere with 5x11.3 bolt pattern.
Thanks again and looking forward to more videos.
the. malinski they are American racing wheels. You can order them online. They are pretty cheap and very light
@@jonathanamador7748 Just found them online, thanks and keep up the great work on it!
jonathan amador do you know the offset? For rims?
Flicking mint
hey i have an 02 crv and wanted to lift it. where did you buy the spacers from, also i live canada
Tyler Lacelle what’s up man. All the info is on my video’s. “Aerogenics”
How mana inch of lift you installed?
What bull bar is that
@@dannymccaffrey3156 I don’t remember. Good if online. And the fogs were Harbor Freight
Hey man, what is needed to make the crv run right with a 2” lift spacers? I know I mention about getting oem axles due to vibrations but what else is needed? Sway bar link? Ball joints etc? Do u think the engine and trans works harder due to bigger tires and taller height? Thanks
OAK’S GARAGE I only added one camber bolt to the passenger front side. Other then that my alignment was all good. And you will obviously lose some mpg. I'm getting 19mpg city which I don't think it's bad for having the size tires that I have...
McPherson ?
@@dimkarpinsky2850 yea
Where do I find mods like that
Where did you purchase your lifty things. Got the same crv and wanted to do something similar
Travis Sefton check out my other videos. I have all my setup info on the videos . Good luck 🤙🏽
@@jonathanamador7748 where did u get the bumber guard ive been looking for 1 w no luck
@@slownlow210 look on eBay or Amazon. It was one of those two. Type in. Bull bar
@@jonathanamador7748 was it specifically for honda crv or another one fit from different vehicle?
@@slownlow210 yes, I believe 02-06 crv
Wheel and tire size pls?
I don’t remember tbh. I might have posted them in one of my other videos
Se tubo que modificar la susp3ncion o se puede levantar originalmente
Nada mas le puse los spacers
Donde has comprado esa suspensión?
Hey I want to lift my 05 CRV which size of lift kit you purchased 2.5” or 3” Thank You
If u do anything more than 1 in the front you will HAVE problems with axles n shit, gna need subframe drop n NAPA axles
Hi again, any steering wheel vibration when going 70mph or higher? I have 06 honda crv, 2 inch lift kit, 15mm hub centric wheel spacers in the front, 225/75/16 tires and I am experiencing steering wheel vibration now, any thoughts?
Hey, the Only time I had vibration issues is when I replaced my torn axles with aftermarket axles. Then I purchased some oem ones and it went away completely
@@jonathanamador7748 I just saw my axle is torn. But dam a new axle cost $600 from the dealer. Where did you get yours and for how much?
@@hegotgame8 I work at Honda so I got them both for about $800 with my discount. We have payment plans so I did that. I tried 3 different sets of autozone axles and they all vibrated
@@jonathanamador7748 that's what I feared. Thanks a lot for your feedback. I'll purchase them from honda world.
@@jonathanamador7748 I have a 2nd gen crv, 225/75/16 with steel rims and a 2 inch lift. When I put the jack next to the lower control arm and lifted the car on the frame of the body the wheel and rim are heavy that it stretched the cv axle and busted it. I tried other points but the cv axle is being stretched any ideas/thoughts of where I can safely lift it?
Hola amigo donde encontro el kit de levante?
@@franciscocastillo-rl3og aerogenicsusa.com
Yo, Is ur CR-V a Manual or automatic transmission?
It was 5-speed
Donde compraste los levante
aerogenicsusa.com/
Hey bro crv is litt.. did you use a bra on ur bonnet or did you wrap it
@@galabaza8263 bra
Good job
where did you get the lift kit
elwood polaris rzr check out my other videos and comments
Where did you get the hood bra?
Sephora
HONDA THE BEST! 👍
JAPAN CAR THE BEST WORLD! 🇯🇵👍🌏🌎🇯🇵🌍🇯🇵
Cool
Post more man
Any axle problems?
Are they stock
Manuel H no problems. they are oem. When I first bought the crv the boots were torn so I purchased aftermarket front axles (autozone and O'Reillys for the lifetime warranty) and it was shaking so I had to buy original axles.
@@jonathanamador7748 so you stuck with oem axles?
Manuel H correct. I had to purchase oem axles. I was getting too much vibration with The aftermarket axles.
@@jonathanamador7748 thats what im going to end up doing this weekend.
Manuel H they were pricy but I needed them. The aftermarket axles were unfortunately not an option.
I pretty much want to do exactly this to my 2003 CRV. Let me copy everything you did. haha
Jesse Bober I got the lift spacers from a store on eBay and I Got the bull bar and basket on Amazon. And I got BLESSED and found the body trim at a local junk yard for $40! The body trim goes for $500 brand new. and it has a U-haul hitch.
That's sweettt, the body trim looks good, I don't see them very often on CR-Vs. Good snag. I want to do the 2" lift, get wheel spacers, and all-terrain tires on my stock rims for right now. What brand was your lift kit? and what size are your wheel spacers?
Jesse Bober www.ebay.com/itm/2-Lift-Spacers-for-2002-2006-Honda-CR-V-RD4-2-F-1-R-SET-Made-in-USA/263888318559?fits=Model%3ACR-V&hash=item3d70f8305f:g:X8QAAOSwiFtbealN
Where do you stay at? I'm in CA. I might same mine. I want to get the 1" instead of the ones I have
I'm in NorCal. Thanks, man, I appreciate it. But I'm still debating on what size I want, I don't want to have to modify too much of the suspension or cause any issues. Still doing some research.
add big wheel. this wheel not gut