HOW TO REPLACE 4WD BRAKE PADS AND ROTORS
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- On this Episode I will show you how to replace the front Brake pads and Rotors in your car, most makes an models will be the same as shown in this video, ALWAYS REPLACE BRAKES IN PAIRS, IE; BOTH LEFT AN RIGHT SIDES OF THE CAR, you can do just the front or the back but you must do both sides!!! Plus i show you how to bleed the brakes to remove air from the Calipers plus flush out the old Fluid.
Need to replace the drum brakes
• HOW TO REPLACE 'DRUM B...
Tools and Products used ✔
Torque wrench: www.kincrome.c...
Socket Set:
www.supercheapa...
Brake Caliper Service Kit
www.supercheapa...
Wire brush: www.supercheapa...
Jack Stands:
www.supercheapa...
Silicone Paste:
www.supercheapa...
Brake Cleaner:
www.supercheapa...
Brake Fluid:
automotivesupe...
Please like, share and subscribe !!!
If you would like to promote your products or have them installed in one of our video's send a message to our facebook page @
Social Media :
/ servicemyride16
Find us on Instagram
@servicemyride
Want to send me stuff!!!
Attention: Service My Ride
64 Jersey Rd
South wentworthville
N.S.W 2145
Australia
Thanks 👍
Disclaimer
The videos created by Service My Ride are for veiwing purposes only, No claims to be made against the company and or any person related to the company, any damage caused to veiwers property is not in any way the responsibility of the company Service My Ride. If the veiwer is not comfortable with any of the information in the videos they can contact Service My Ride or seek advice at their nearest qualified motor dealer.
Thanx Service My Ride, great vid m8, very helpful and great detail, i can now confidently take on the same job on my MN Triton, thanx again. Tony.
Thanks Tony, will cover the rear brakes in the next episode
Do you have a rear sway bar on your Triton. What is your opinion on them? I’m thinking of having them installed to reduce body roll.
I don't have a rear sway bar but highly recommend them for any 4x4, especially if you have a lift and carry extra weight, will still perform well offroad.
@@ServiceMyRide brilliant I was worried it might affect the off road ability
Hello, very good video. In Spanish should be great 😂. Even though, you show everything very well. Thank you very much.
Now that we are mates 😉 I’d love you to properly explain the 4wd setup on my new GLS Triton. As I understand it “2H” means rear wheel drive, but really only one wheel drive. “4H” means rear wheels (one wheel) and front wheels (one wheel). Which is still only one wheel drive because of the centre diff. “4HLc” means lock the centre diff so really only two wheel drive. One front wheel and one back wheel. With a diff lock on the rear would mean 3WD and diff lock the front diff would mean true 4WD. Did I get it right? Thanks.
as we are now "mates" 😉 yes mate, you have explained it as the book would describe the workings of the triton drive train and my understanding of how its works is the same, you should be writing the material for this channel as you have nailed the explanation of it, please dont go into competition with me 😂😜👊
It looks like good a good video but if you made a small mistake it could cost you more . I think getting the talk setting correct would be a very important step. Plus buying all the bits and peices to do this job could cost so it may be easier to take it to the mechanic. And no you have a warranty. But thanks for you great videos service my ride.
Great vid , good.to see more Aussie content for working on cars , using your vid as a guide to do my Nt Paj brakes
Hi my name is Dennis I have just put new brakes in to my triton and what is happening they have started to smoke do you have any ideas what’s going on please thank you
shouldn’t you apply brake lube to the ears of the new pads and the clips, so they slide?
ive never really had to brake the bleed nut to repress in the piston, i usually just open the brake cylinder resvoir lid and go
Appreciate the effort you put into these videos. They've been a big help. Thanks.
Are 2019 np300 navaras this easy?
I asked for a 4wd brake front brake rotor change and this is not any use.
Good video mate I will be doing this on my mn this weekend.
4x4 Camping and Adventures whens the big move mate?
Thank you for this great video. Are you using dot 3 or dot 4 brake fluid? So i can fill up my triton. Thanks
I used Bendix high performance dot 3,
Absolute godsend, This probably has to be one of the best explained "how to" videos i have seen. I'm a bit late to the party, (so hope you still receive notes) but you honestly just saved me $600. Mech wanted to charge me $871 to do pads, rotos and flush. i did in a bit over an hour and it cost me $210 for parts and consumables.
Where do i get rubber seals from for guide sliders
thanks mate is helpful good on u
I like your headlights. Can’t find them in UK.
Bought them from Mars Performance here in Australia, Not sure if they ship overseas.
Hi love the videos mate. I just don't get the torque settings...
27 +_ 4 nm now does that mean plus or minus 4 nm?
Hi mate, I understand it to be a variance on the bolt, Min and Max, so a 27+4 only would be a min of 27 an Max 31NM, happy to be corrected if this is not correct.
@@ServiceMyRide thanks mate. I thought the same. Cheers. Keep the vids coming!
Thanks for your video,I now feel confident to have a go at my faithful old ML Triton (356,000 Km's) love the old girl! Cheers.👍
Wow! That's an amazing and easy to follow video . Gear job on the video you're like a mini Chrisfix
thanks, will take that as a compliment, POV is the best way to show you guys how to do it, just takes twice as long to film every episode
@@ServiceMyRide also I subscribed
Not likely. 👍. You’re just too good for me. Besides, I’m in to Woodworking. Your videos are quite simply excellent. Clear, concise and very easy to follow. I’m surprised at your low number of subs. Still it will grow I’m sure. You should try to partner up with one of the big names like TJM or ARB to showcase their products. I’d love to see you do a video on...bullbars, diff lockers, driving lights etc.. Are you in Sydney or Melbourne?
Could I sugest you to push on the braking bar, when lossing wheel bolts, insted of puling, just to save your back
any tips for when the break disk is totally ceased on and hitting it with a hammer has just resulted in chips?
Get a bigger hammer
All joking aside, you really do make exceptionally informative videos. I’m now subscribed. Cheers👍
Never put any grease on the hub. The warranty of the brake discs is immediately out
Great explanation and camera work. Thanks for taking the time to do this.
ozyrob1 thanks mate, appreciate the sub an comment
awesome mate very helpful! gonna replace a set of pads and rotors on my PB challenger. gonna follow this step by step.
Hi mate, I actually have to get my brakes done at a shop due to not having the time or piston compressors to do the job myself.
Do the wheel bearings need any adjustments done to them during the brake swap? I want to make sure I'm not getting shafted for unnecessary work being done.
Love your videos!
Another great video mate
Thanks Trumby 👍
1st time I've ever watched any your videos insta sub for the intro music
great vid mate now show the rear brakes🙂🙂🙂
Thanks Dan, that will be in the next few weeks 👍
Thanks for the videos, they have helped me service my own car with ease. Cheers !
Cheers mate your videos are the only ones I use as a guide to servicing my triton and they save me hundreds keep up the good work
Thanks a lot. Appreciate the effort to make this video.
Those rotors probably came from my warehouse! :D
sevensixtwomm they are super quiet and smooth, I picked them up from Bursons in Penrith, if so thanks for sending them to me 👍
Ahh, I work in thier QLD warehouse, so maybe not :) Good to hear they go alright!
Hi! What brand of rotors are you using?
Excellent vid mate, best one on this topic i have found.
Thankyou - awesome work!
Thanks Lindsay
So nice information 👍👍👍 thanks
Thanks for the uploads mate, very helpful.
Thanks, excellent video.
Mate very helpful great !
Looks like a video from chris fix
Hi mate great videos. Where do you get all the torque setting from for the mn triton?
Hi Michael, thanks mate, you will need to download a workshop manual, I use Emanualonline
Hi can you make video how to change or service fuel diesel filter on triton?
Davis Tegong here is a link to replace the fuel filter
th-cam.com/video/WFiuD6ZIQbE/w-d-xo.html
Service My Ride but not same fuel filter.. my triton use plastic one.... and only change filter inside that fuel pump
Service My Ride and thanks all you video help me to do by my self
thanks m8! 😉
Great, Thanks. Yes rear brakes please
+ 1
Love it!
Found out that the rear rotors and calibers are similar but the process is more convoluted. Took twice as long as the hub needs to be thoroughly cleaned to receive the new rotors and reduce the risk of runout.
You really are a legend mate, straight to the point.