Great video! Just what I needed to know to fix my 2005 Silverado! I had no idea where to even start but thanks to your video, it's all good! p.s. I'm 78!
Love the video. I am 63yrs and I installed this myself. I was trying to help my husband since he has so much on his plate. That I just couldn't believe that I could do it. The no talking did wonderful. Thank you!
That was one of the best you tube how to videos I've ever seen. I've watched thousands. Generally I don't like music. But when you can convey directions and instructions without flabbering your lips , and do it this well, it's very easy to listen to it. Thanks for the straight to the point idiot proof diy video on how to replace your broken console lid.
I haven’t had a working center console in years. Always had to keep the center seat folded down cause stuff would always fall out when I had it up, finally ordered one and got it and this video confirmed how I put it together
Thank you Buddy! I love this tutorial style. Super easy to follow, no unnecessarily long intro, and even a simpleton like me can follow along with ease.
Great video my friend I love the way you did the demonstration you did it closely before the camera close so we can see in detail I watch all the TH-cam channels do the same thing they did a lousy job you're the best Channel I put my own Consulting thanks to you thank you so much great help..
@@dnamotoring plz keep making more videos cuz no one ever knows when they might need it. And urs are ease to fallow and short others are confusing long and skip much needed details especially for a girl 😱 I not rich so cant go to a mechanic or dealer to get minor things done so again thx for ur great video 🤓
Good info on the lid and will be useful when replacing mine shortly (torn vinyl), thank you! .. I do have a question. On the armrest bottom portion, where the front end push bar is to release the lid is, do you know how to get to it? the latch mechanism on mine gets stuck, but cannot figure out how to get to it. I have looked at GM parts diagrams and cant find anything. I see the push bar on the front and a plastic piece top inside, but no screws/bolts or any means for snap pins or anything along those lines. Any help would be appreciated!
If you can remove the whole lid because it's broken where the springs are you should be able to just open from the front then pull if not remove the rod and springs then follow the video with a new one
Also if the plastic is broken where the rod goes into you'll either need to 3d print a new holder and glue it in place or replace the whole unit you can find one most likely matching in a junkyard or ebay
Mice sometimes make nests inside the console lid so the towel could be for preventing insulation, dust, or other debris from getting in the bucket other than that personal documents he didn't want to move could be why
Great video of the process. My only complaint is the small text at the bottom of the screen. It's too small for those of us with poor eyesight. Other than that very good video.
Let us know what you thought of the video in the comments! 😎
👍😎
Great video! Just what I needed to know to fix my 2005 Silverado! I had no idea where to even start but thanks to your video, it's all good! p.s. I'm 78!
Love the video. I am 63yrs and I installed this myself. I was trying to help my husband since he has so much on his plate. That I just couldn't believe that I could do it. The no talking did wonderful. Thank you!
Glad it was helpful!
How does that kitty work at 64?
This help me a lot I almost broke my stuff before installing
Thx for the vid...I know its not rocket science but watching your vid just made it go faster and easier.
Glad to hear it!
That was one of the best you tube how to videos I've ever seen. I've watched thousands. Generally I don't like music. But when you can convey directions and instructions without flabbering your lips , and do it this well, it's very easy to listen to it. Thanks for the straight to the point idiot proof diy video on how to replace your broken console lid.
Hands down easiest video I've seen so far thanks took less than 5 mins to install on my 04 Chevy Tahoe.
Great to hear!
Thx a Ton!! Just finished installing mine!! '02 family heirloom.
Right on!
Fantastic! The instructions were super hard to follow. The pictures in guide were super grainy. Thank you so much for making the video.
I haven’t had a working center console in years. Always had to keep the center seat folded down cause stuff would always fall out when I had it up, finally ordered one and got it and this video confirmed how I put it together
Thanks for the feedback
Excellent video. I replaced mine after watching this video. Love the style, no endless yacking, just "how-to." New sub here. Blessings to all.
Thanks for the sub!
Thank you Buddy! I love this tutorial style. Super easy to follow, no unnecessarily long intro, and even a simpleton like me can follow along with ease.
Thanks for the video! It was very helpful, and I was able to install my armrest kit in my Silverado 2001 in about 15 minutes.
Got some taillights from you guys, this is actually my second set, thanks for this video
Right on!
This is one of the best videos of how to simply DIY .💯💯💯 thank you and God bless you.
Glad it was helpful!
I am going to put mine in right now. Thanks for the video.
No problem 👍
The finger pointing directions is on point. ;) thanks
Great video my friend I love the way you did the demonstration you did it closely before the camera close so we can see in detail I watch all the TH-cam channels do the same thing they did a lousy job you're the best Channel I put my own Consulting thanks to you thank you so much great help..
Glad it was helpful!
@@dnamotoring definitely my friend you're definitely more than welcome thank you very much again..
Thanks a lot. Bought the truck with no console lid so had no idea how the spring retainer went. Thanks for the help
Great to hear!
Thanks for this. Much better help than the instructions that came with the console.
Thanks for the feedback
appreciate the video!
Glad it was helpful!
Great video... so much better than the piece of paper they give you.. many thanks.
Glad it was helpful!
Awesome video. I just replaced mine w/ur help. Appreciate the step by step
No problem 👍
Thanks so much for making this video! This makes it so much easier to figure out and install
Glad it helped!
Thanks for the video, I had to watch it a few times, but I think I was able to install a new lid from eBay on my console of my pickup
Glad it helped
helped me out a lot Bro thanks so much for posting this vid ,thumbs up
No problem 👍
Thank you brother need 2 buy a new one 4 my truck your video was very helpful 👍👍👍
No problem 👍
Great video thanks to you the job was easy peasy.I was all over the ,place until i found your video, great job Thanks.
Great video and no talking straight to the point 👏👏👏
Thank you
Thank you, this video helped a ton!
You're welcome!
Thank you so much I I always put this off I finally did it’s so much better without that annoying rattle
Thanks! Just replaced mine to this video!!
You're welcome!
Appreciate your knowledge brother!
Any time
Thx very helpful 👍🤓👍
No problem 👍
@@dnamotoring plz keep making more videos cuz no one ever knows when they might need it. And urs are ease to fallow and short others are confusing long and skip much needed details especially for a girl 😱 I not rich so cant go to a mechanic or dealer to get minor things done so again thx for ur great video 🤓
Way better tutorial than instructions sent with the lid it was way simple to install
We appreciate the feedback
Awesome video thanks for the clear instructions!
Glad it was helpful!
Good info on the lid and will be useful when replacing mine shortly (torn vinyl), thank you! .. I do have a question. On the armrest bottom portion, where the front end push bar is to release the lid is, do you know how to get to it? the latch mechanism on mine gets stuck, but cannot figure out how to get to it. I have looked at GM parts diagrams and cant find anything. I see the push bar on the front and a plastic piece top inside, but no screws/bolts or any means for snap pins or anything along those lines. Any help would be appreciated!
This video rocks thank you so much!!!
No problem!
Thank you for making this for us
No problem 😊
Thanks for the help! Easy to follow and great instructions!
Glad it helped!
Fantastic video thank you sir!
Glad you liked it!
Excellent video. Thanks!!
Glad you liked it!
Thanks a lot, Dude, really helped.
Glad it helped!
Great video worked for me
Glad it helped
perfect. Thx
You're welcome!
Just installed it today.. This video made short work of it. Thanks again
Amazing and concise video. Mine went on like a charm.
Perfect how-to video man thank you for the time and effort!
Glad you liked it!
Thanks that was right on , even a novice like me got it
Thanks for the feedback! :)
Perfect. Thank you.
Absolutely just that easy thanks buddy 😁
No problem 👍
Great video, thank you
You are welcome!
Perfect Video 👍🏽
Thank you 🙌
My truck was broken into recently, anyway, is this the same process when it was broken upen from the back part of the lid?
If you can remove the whole lid because it's broken where the springs are you should be able to just open from the front then pull if not remove the rod and springs then follow the video with a new one
Also if the plastic is broken where the rod goes into you'll either need to 3d print a new holder and glue it in place or replace the whole unit you can find one most likely matching in a junkyard or ebay
Thanks for the help
No problem
Great video .. thank you
Glad you enjoyed it
It worked for me as well
Thanks great help cheers
No problem 👍
good video
Glad you enjoyed
Great video
Thanks for the visit
Thanks 👍 bro
Excellent guide, was done in less than 10 minutes. The new one really shows how dirty and sun damaged the rest of the interior is though 😅
Thanks for the feedback
Thanks ⭐️⭐️⭐️
Does it work on a 00 ?
Here's fitment: amzn.to/3uHF1Wh
Why does my center console look so different? Mine hinges on the side and this lid doesn't fit, even though it's an 02.
It makes it easier to talk through the video
We appreciate the feedback
What’s with the towel though?
Mice sometimes make nests inside the console lid so the towel could be for preventing insulation, dust, or other debris from getting in the bucket other than that personal documents he didn't want to move could be why
Great video of the process. My only complaint is the small text at the bottom of the screen. It's too small for those of us with poor eyesight. Other than that very good video.
Thanks for the feedback
This is the best video on replacing the lid...those other dip shits remove the whole center console ...thanks
We're happy this video helped you!
The music in the video is HORRIBLE. Having to read instructions at the bottom and listen to that horror movie music is SO distracting. Try again.
Having a hella time removing man. Damn bolts are cemented in 😂😂
Thanks for the feedback
Probably not gonna be helpful now lol but white lithium grease on the rod helps getting it out worst case wd4p or pb blaster
A little dialogue would have been good.
Thanks for the feedback
I spy a nitrous pill
Thanks for the feedback
Thanks 👍
No problem 👍
Very helpful video thanks!
Glad it was helpful!