1999-2007 ..GM TRUCK CENTER CONSOLE LID REPLACEMENT FIX.. UNDER $50

[@user-ms6rm1fc9x]

Thank you so much for this tutorial. I was able to do this all by myself. My husband was in a bad mood and refused to do it. So I just kept rewatching this video and was able to do it.

[@miguelgarza7980]

Good job mam 👏👏👏

[@an_auto_addiction5742]

Awesome glad I could help you

[@jeffruiz9988]

You need a new husband- props to ya miss for getting it done

[@Despierto1983]

@@an_auto_addiction5742
Hello ok I have a cuestión My center console open different open from de side. Where I can get one of them. Every single one I see it’s like yours but my it’s different

[@0espy0]

❤ love this. I knew my husband would take forever to do this for me. I did it myself. And I must say, all I needed was the screwdriver. Thank you. God bless you.

[@jamiewilliams970]

Just changed mine after 23 yrs… thank you!!!! I’m glad your here, I dont have a man around to fix my stuff for me, your directions were perfect!!!

[@ThatHobby]

I couldn't get the new pin in. It was a tight fit I had to get out a hammer too. My old truck may not look as nice as yours but my center console does. Great video! Thanks

[@jamesgreff2120]

10.14.2023 A hearty thanks! Had a replacement console lid in my garage for a few years - the wife said, “are you ever gonna replace this?!” Your video demonstration was spot on…🙌

[@hugotrevino2565]

Just finished changing mine and thanks to your video it was a breeze. Great video!!

[@an_auto_addiction5742]

thank you...

[@PaulTMaack0]

Thanks! I bought the lid cover off Amazon, and was looking for a video on how to install it. So happy I found this one.

[@an_auto_addiction5742]

Thank I appreciate it

[@kaciesimmons3006]

Thank you for this video, I was able to impress my husband, yet again, with my fix-it skills. 😂

[@an_auto_addiction5742]

Awesome thanks for letting me know

[@crushingwithkj7127]

Thanks for the tutorial! I just replaced mine on my 99 Silverado.

[@chrisl3211]

Thank You for making this video! After watching it, I was able to easily replace the console lid on my 04 Avalanche.

[@clintonwells4493]

Best video!!!!! Thank you for not wasting time and getting right into the fix. Love it. And now I am going to fix mine.

[@Watchyn_Yarwood]

Yes! Exactly my thoughts. Now even I at 78 can fix the lid on my 2005 Silverado!

[@quantravioushigglenut61]

Good video man, straight to the point and easy

[@chainsmokinreds]

Thank you! The instructions that came with the lid were worthless. You saved me!

[@BrendenBallin]

Thanks so much. Got this for Christmas for my first truck and I’m 16 so you got to know you explained this well

[@mistahchito1228]

Thank you for the info it only took me 15 minutes to fix it.

[@mickhardin15]

Thanks! I didn't want to break the new one so I viewed your video!

[@frankburklin1116]

Found the other hole,followed your tutorial and bingo.Thanks.

[@josemoreno3334]

I took me 20 minutes to replace it. Thanks for that info.👍

[@henrykaiser8809]

Thank you your video was great took me about 5mins to install👍👍

[@richardr7947]

I am getting ready to order one for my truck thanks for video.

[@an_auto_addiction5742]

No problem thanks for checking out my channel

[@aldonwhitfield1534]

Very well explained and like how you don’t just fast forward through steps you explain them then start the video again before completing each step.

[@tke2414]

Awesome video. 15 minutes $25 fixed.

[@an_auto_addiction5742]

Thanks 🙏

[@Bobby-kn5bf]

THANK YOU! PERFECT DETAIL👏

[@CameronAlford]

This was a breeze. Thank you so much

[@jerrystiles27]

Thanx buddy..I just ordered one..this helps a lot

[@Stack456]

I ordered & replaced it
Appreciate the video

[@an_auto_addiction5742]

Thank you

[@cactusblossom770]

Thank you so much. I appreciate this! I’m restoring my pawpaw truck to be able to drive it myself.

[@Friedcrust]

Thanks man didn’t even need tools since mine was already missing the rod and everything. Took less than 5 minutes

[@an_auto_addiction5742]

Awesome

[@michaelobrien1382]

Thanks man! Quick and to the point. 👍🏼👍🏼

[@davidoverstreet0246]

Super easy job. Thanks for the video.

[@an_auto_addiction5742]

@@davidoverstreet0246 appreciate it

[@FunkyBruja]

1999-2007 Truck center consoles for $27 on TEMU 👀
Four colors Lt Grey * Beige * Dark Grey * Black * Excellent quality 🔥

[@alexnevarez1554]

Thanks for the video. Made it easier for me. 🍺

[@pavelarias8240]

Muchas gracias me sirvió mucho saludos de Ecuador🇪🇨 amigo 👌🏻

[@johnharrisonschulz]

1:42 Nice woofers in the back. I bet it sounds good.

[@jeremyglossup]

Many thanks for this tutorial!

[@MS46Z]

Great video. This Will fix my Chevy Avalanche too. You made it look easy. Thank you

[@Sicklajoie]

Thanks for the video, it was a big help!

[@yvonnearvizu5218]

Thanks so helpful your way to teach👍

[@ScubaSteve0224]

Thank you for making this video. It really helped me out.

[@hunt_az]

Such a simple task ! Thanks for the videon

[@morganperry3852]

Very informative thank you, sweet build btw.

[@an_auto_addiction5742]

Thank you I appreciate it

[@mitchaiken8737]

Wish I could find one with the factory cloth cover.

[@greggeltner8084]

Easy money with your directions. Thank you

[@an_auto_addiction5742]

Appreciate it

[@jamesdavis8617]

Mine don't latch

[@mrk1324]

Thank u .. i was looking for that long time

[@brendaricketson5183]

Excellent video.....really helped...

[@an_auto_addiction5742]

Awesome. Thanks for checking in. Have a good one

[@foundwanting1]

Thank you sir. Mine was also busted. Your step by step was very good. I appreciate it. 👍🏽👍🏽👍🏽

[@gerardosierra2903]

Gracias amigo, te lo agradezco mucho

[@elmathematico2638]

Thanks for the video. I just fixed mine!!

[@marcosestrada6715]

Clean truck man!!!!

[@xelor75]

The video demo make the installation simplistic - no one can get wrong😊😊😊

[@marywoods6283]

I like the tutorial but the little black 1" plastic piece between the springs broke is that important?

[@dreambig972]

Just changed it on my 2500 thanks

[@EL_JEFE880]

Nice I like the truck in special red

[@vcridesphotography]

Thank you so much for the video😎

[@sean.g4516]

Do they replacements kids for the 99 2000 model with the full console that goes right up to the ac controls with cupholders?

[@an_auto_addiction5742]

You can swap in a Tahoe or Yukon center console or a 4 door upper trim console.

[@armandomendoza9743]

Thank you very helpful 👍

[@bradwaits5366]

Thanks for the video, big help. 👍

[@GamerKiller2347]

Thanks just got mine fixed

[@an_auto_addiction5742]

Awesome

[@donneal1352]

Love you pick up.

[@rhannon86]

Awesome video. Thanks bro

[@davidscoggins1931]

Thanks for the excellent help 😊

[@an_auto_addiction5742]

I appreciate it

[@NELSONG12]

Very helpful, thank you!

[@joselrubio7982]

What’s the name for the carpet/vinyl flooring you have installed

[@an_auto_addiction5742]

It is just factory flooring from gm . Just ordered instead of carpet

[@tyrell9672]

Thanks was very helpful

[@isaacrodriguez2969]

How can you open the lid for the console hard to open

[@alaskalodgelife]

Thanks for the help

[@joeorozco5293]

Just watched your video, which I think is extremely helpful. One question...my 1999 Silverado's center console lid is upholstered with the same, matching cloth as my seats. Is there an easy way to remove the matching cloth from my old, broken lid and reapply it to the new lid so it will still match my seats?

[@an_auto_addiction5742]

Not sure haven’t tried to remove the material before. Sorry. Thanks for watching.

[@frankburklin1116]

I'm trying to figure out why I only had one hole for the spring tail to go through.

[@Toedco1366]

Thanks for video!

[@tracey1708]

Bought a new lid and the latch. The Tahoe I bought was missing the latch. I now realize why. The little mechanism that opens and closes when you ouch the latch doesn’t want to release the hook all the way. Keeps getting stuck closed. Tried WD 40 and I’m now at a loss as to how to get it to not get stuck even with the new lid

[@MiguelGarza-n3f]

Thank you bro rlly helped

[@Walker_Porter]

I dont like the vinyl lids.I looked everywhere for cloth console lid. The only ones I found were on e Bay and cost like $120+. Does anyone have any tips?

[@cesargonz9352]

Thanks 👍 bro 🎉

[@1deadpool11]

Great video

[@STR4BRRYM1LK]

Thanks took me 1 min since mine was already off lol

[@SamoanSituation]

My console is jammed it won't open any ideas on how to open it? Use to be able to push the button really fast and it pops open but now it don't open at all

[@kodylarsen4882]

Push the button and smack the lid above latch. Works every time

[@retrobro6667]

Thanks 👍

[@DJ-mp2ob]

Thanks so much!

[@Pirrurris1994]

Has anyone replaced the lid on the full center console?

[@xelor75]

Thanks a million😂

[@babarocus1]

Thank you bro!!

[@mikesintegra1]

Thanks man.

[@colto195765]

Does anyone know where I can get a replacement cupholder?

[@reidkemp]

Thank you

[@Anthonydemone]

🔴 Where's the other videos of that bad ass red truck❓️

[@jtprez4154]

Ty sir 💪

[@an_auto_addiction5742]

Appreciate it

[@ghahandi]

Need this for a 1999 Tahoe- anyone know if it will work on my Tahoe? Looks similar

[@DoctorVdW]

Extremely likely as manufacturers share the exact same parts between many models to save a few pennies (so the CEO types can get this year's newest jet, another island, you know how they roll). In all seriousness, search automotive rebadging to see the worst Examples

[@abelhernandez8282]

grasias brother

[@loganrandall8786]

Mine broke in the same exact spot 😂

[@Jabez.21]

mine cracked from the same spots as yours LOL

[@robertwatford6459]

😊

[@Smokey420Greenleaf]

why does this dude look 50 and sound 15? lol

[@an_auto_addiction5742]

@@Smokey420Greenleaf it’s the stache

[@MsArleeneE]

Can't see shit!
Thanks

[@sKid-zy1ss]

Worst lid ever , it’s noisy AF

[@BigNasty.7314]

Great video and thanks. Just installed mine with ease that is to this tutorial.

[@brandonzaratearredondo6890]

Great video thanks👍