Outstanding video....Just finished the job...couldn't have done it without your help. Only comment....repair was a little misleading....when you pulled your axle...none or very little oil. I was figuring a few drops...figuring it was a thicker grease like fluid. Nope...I was underneath doing the passenger side first (I did both axles) and had to be under the vehicle since that axle is longer...anyway I got a BATH in transaxle oil....laughs. The gearbox was cold...but it is 90W oil. That's okay though...you did warn us...laughs. Still a great video.
That is the right way to do it. Since I replace the trans oil when I did the clutch, I raise each side very high to avoid the oil coming out when you remove the axle from the trans part.
@@G2GBuilds I just saw this comment after I wrote mine....I should've read through all the comments and replies before I started the job...lesson learned! Laughs. Now I know why a lot of oil did not come out during your video.
Thanks man for this video it helps me a lot, great job 👍
I'm glad I was able to help.. 👍
Parts for B13 and b14 same??
Some of them are, not all.
Outstanding video....Just finished the job...couldn't have done it without your help. Only comment....repair was a little misleading....when you pulled your axle...none or very little oil. I was figuring a few drops...figuring it was a thicker grease like fluid. Nope...I was underneath doing the passenger side first (I did both axles) and had to be under the vehicle since that axle is longer...anyway I got a BATH in transaxle oil....laughs. The gearbox was cold...but it is 90W oil. That's okay though...you did warn us...laughs. Still a great video.
I'm glad the video was helpful.
Great job doing your new axles bro. 👍
Thanks! What you need for the B13 with no BS!
Do you need to drain the transmission gear oil before removing the whole shaft?
That is the right way to do it.
Since I replace the trans oil when I did the clutch, I raise each side very high to avoid the oil coming out when you remove the axle from the trans part.
@@G2GBuilds thank you
@@do_not_rotateyour_phone3957 no problem! 👍
@@G2GBuilds I just saw this comment after I wrote mine....I should've read through all the comments and replies before I started the job...lesson learned! Laughs. Now I know why a lot of oil did not come out during your video.
No problem.
Now you know for the next time bro. 🙂 👍