Always a highlight of any evening watching uncle Harvey the Ironhorse. Looking forward to seeing all the upcoming builds. Loyal to learning from the true master builder.. Be healthy and safe y'all..
Please use caution with fuel blends when working with titanium. Stress corrosion cracking can occur when exposed to methanol. Beautiful pieces parts, , , ,thanks for the video.
You know Harv, nobody in the saw community really show the machining aspect of the builds. For us guys that do have machine shop equipment, I for one would enjoy a machining series. Scott Kunz is the only guy that I have seen that goes in depth on cutting the squish bands using mandrels with a piece of high speed steel mounted in the top. Very interesting to me at least. Anyway, that's just my two cents on the matter. Can't wait until your builds start up again. Take care buddy, and stay cool!
Glad I found this channel. Keeping me motivated while I finish a shop in my garage. As soon as I have a place to work, the old 346 get rebuilt. Then maybe a big bore for milling.
I found out about wolf creek from you, I have ordered a couple top ends from them this summer they always get to michigan in 2 to 3 days I like using them
I had problems with that titanikel flaking when I tried grinding. It was such a good looking cylinder, but idk if I can continue porting them. It was a pain. That coating was just too hard, chasing flakes all over the place
Finally a stilhuqy...lol a saw for everyone lol like stihl only? Husqvarna? Boom harvey has ya covered on both in same saw, I love the open mind, minds arnt made to be put in boxes, I am literally tickeled to death now, ima go back to wolf creek saw saw shop and get some decomp plugs too, been meaning to grab a few, and supporting my good friends is a good excuse to buy from him
Iron horse now that's some serious interesting stuff. Years ago I had my Husqvarna 394 I absolutely loved that's all and have always missed it dearly. I got a chance the other day to buy a 395xp that has spent its time in the bush around these parts making money. So I got the saw reasonable it needs a new coil and the muffler is cracked and of course has normal there some vents broke out of recoil cover but she's in good shape for her age. I have always wondered if a 1200 crank would go in that case so thank you.
You could also use the 281 piston, it's a 52mm with the 13mm pin. I have been wanting to do this also, I will definitely be following along for this one
Awesome seeing you back again Harvey!! Hopefully this heatwave isn't beating you up to bad up there in NY!! REALLY like where this 395 project is going I'm about to pull the trigger on a 395 soon if I can get a deal going here...Hopefully that extra 372 kit is for that 046 build also 🤔🤣🤣
Having heard you rattle off these same parts several times over the past two or three years now It come to me as familiarity. The repetition is breeding contempt. I enjoy the time I spend hear on Ironhorse. We are out of brake clean in epping NH.
Hi Ironhorse I did research on putting a 390 crank in a 372. You might have to press it apart and cut the inside of crankshaft then when you press the crank pin back on the crank end the clutch side will be shortened so everything will fit right. let me know how it works.
Harvey I'd be willing to bet they change the materials they used to make there pistons with those shiny new coating in those cylinders I just got one for my one project hopefully they don't chip when doing the port work .
Hey buddy..hot & humid the name of the game..nasty for working in the woods..I love Wal-Mart stories..I hate that crap hole...I still shop there...lol...
Yessir hoooooottttt...shew, yes I'm tickeled to for this chinamart story this autta be a hoot lol, yeah I'm not about no Walmart either for that matter i dont much care to go to town anyway..the stupidity concentration nowadays is to thick..nerves cant handle butvso much and..soap box..sry guys lol I'm dun
It’s awesome to learn about building a saw. I have a really nice 2009 372 I want to have built but I want a screaming work saw. And I also have a 395 that only pulls a 36” bar and chain I would love to get ported and tuned. Are you going to do anymore builds for people.
Talk abt machine clutch side down . What abt splitting crank and using 372 on clutch side. Unless your going for bigger bearing. That or is rod pin same on lower? If so put long rod on 372 crank lower.
Kind of power do you get out of a 72 big bore on your saws you think? I have a 52mm 86cc stroked 99 Honda Elite. Awls it wants to do is pull willies. I’m thinking about 10hp give or take.
Hey Harvey what is the saw on the stove ??? Is it a Remington or Johnsered.?? I ask because I had three Saws left on the back of my truck the other day!! A Remington 5118 and a couple poulin pro saws !! The Remington has never had gas or oil in it but someone took pull starter off of it . And I'm looking for one and the screws to hold it on !😊👍👍👍👍 Lots of cool things in the box 😊👍👍👍👍👍 The Remington is a 2015 manufacturer date !!!
How you doing Harv? You look like you’re losing weight 👍🏻👍🏻. Question: I’ve got a farmertec 372xp. It runs flawlessly, but I want to get an oem carb just in case. Can I run an x-torq carb on that saw? Is there any benefit to running an x-torq carb? Or should I just get an xp carb? Thanks Harv!
When uncle harvey gets that excited puzzled face I start getting excited because I know I'm fixin to learn something
Always a highlight of any evening watching uncle Harvey the Ironhorse. Looking forward to seeing all the upcoming builds. Loyal to learning from the true master builder.. Be healthy and safe y'all..
Wow castings that 72 looks very nice. Quality for sure.
Please use caution with fuel blends when working with titanium. Stress corrosion cracking can occur when exposed to methanol. Beautiful pieces parts, , , ,thanks for the video.
Thanks for the tip! That was something I needed to know
@@theironhorse6600 Your welcome.
We love you too Harvey
Cripes your like a kid on Christmas morning aint cha !!!! Lol nice lookin products !
I always stay till the end buddy!! Gettn caught up on your vids. Cant wait to see these projects done!! STAY SAFE!!
You know Harv, nobody in the saw community really show the machining aspect of the builds. For us guys that do have machine shop equipment, I for one would enjoy a machining series. Scott Kunz is the only guy that I have seen that goes in depth on cutting the squish bands using mandrels with a piece of high speed steel mounted in the top. Very interesting to me at least. Anyway, that's just my two cents on the matter. Can't wait until your builds start up again. Take care buddy, and stay cool!
Glad I found this channel. Keeping me motivated while I finish a shop in my garage. As soon as I have a place to work, the old 346 get rebuilt. Then maybe a big bore for milling.
Your cat is cracking me up!
These builds sound like lots of fun!!! Can't wait to hear about the Walmart story 😁😁😁
Laying them cylinders really do look beautiful
Your an honorable man Ironhorse!!!
BOX OPENING!.... thanks 4 video. be kind.
Have been planning on putting an order into wolf creek. Will be telling them that iron horse sent me!
Big fan of Wolf Creek!
Excited to see these builds!
You're right, you do learn the best stuff if you watch till the end, and i always do! I'm looking forward to seeing what this project turns into!
Another great video thank you Harvey
very intresting builds,waiting allready for the next video
Thanks a bunch for sharing and passing on your knowledge. Have a great weekend....
Can’t wait to see these builds buddy
As always another great vid Harvey. Very interesting info. Will be waiting and watching. Be safe and be careful.
You have inspired me to build my grandad 034 super into a saw my grandkids will enjoy.
Nice lookn cylinder n piston there.
Great video Harvey, thanks, your blood's worth bottling. When you tell us about Walmart just take a deep breath and let it out gently. Blessings.
Buddy those are some fine pistons and cylinders. Thank you for the valuable information sr. God bless. 🌲🌲🌲
Glad your back Iron horse. Better days
Thank you!! You are Grate !!!!
What’s with Walmart.
WALMART!!!!!!! Love it Harv, I enjoyed the rest of the video too! Lol
Take care Harvey all the way from Ontario Canada!!
Can't wait to see how things turn out I'm sure it's either going to go very very good or go with a big bang
One or another!
Bit of a thought for you with the 372/390 idea Harvey, 3mm case spacer. Use your gasket as a template. Works a treat. 😉
I found out about wolf creek from you, I have ordered a couple top ends from them this summer they always get to michigan in 2 to 3 days I like using them
Titanium has amazing heat properties I'm curious to see how it grinds far as the alloy, yeah that stuff is gorgeous lordy lordy
I had problems with that titanikel flaking when I tried grinding. It was such a good looking cylinder, but idk if I can continue porting them. It was a pain. That coating was just too hard, chasing flakes all over the place
Finally a stilhuqy...lol a saw for everyone lol like stihl only? Husqvarna? Boom harvey has ya covered on both in same saw, I love the open mind, minds arnt made to be put in boxes, I am literally tickeled to death now, ima go back to wolf creek saw saw shop and get some decomp plugs too, been meaning to grab a few, and supporting my good friends is a good excuse to buy from him
Iron horse now that's some serious interesting stuff. Years ago I had my Husqvarna 394 I absolutely loved that's all and have always missed it dearly. I got a chance the other day to buy a 395xp that has spent its time in the bush around these parts making money. So I got the saw reasonable it needs a new coil and the muffler is cracked and of course has normal there some vents broke out of recoil cover but she's in good shape for her age. I have always wondered if a 1200 crank would go in that case so thank you.
Hi Harvey good looking parts
Uncle harve! Love u buddy
Hey harv that kitty wants to build a nest in your wig !!!!
You could also use the 281 piston, it's a 52mm with the 13mm pin. I have been wanting to do this also, I will definitely be following along for this one
till the end all the time
Awesome seeing you back again Harvey!! Hopefully this heatwave isn't beating you up to bad up there in NY!! REALLY like where this 395 project is going I'm about to pull the trigger on a 395 soon if I can get a deal going here...Hopefully that extra 372 kit is for that 046 build also 🤔🤣🤣
Already got your top end! Yer build is in the lineup!
@@theironhorse6600 harvey ur the man..just sayin
Having heard you rattle off these same parts several times over the past two or three years now It come to me as familiarity. The repetition is breeding contempt. I enjoy the time I spend hear on Ironhorse. We are out of brake clean in epping NH.
Hi Ironhorse I did research on putting a 390 crank in a 372. You might have to press it apart and cut the inside of crankshaft then when you press the crank pin back on the crank end the clutch side will be shortened so everything will fit right. let me know how it works.
I’ve bought several top ends from Wolf Creek due to Harvey recommended them in the last few months.
Oh my now my other saw family has posted, except were all the same saw family ol tinman just popped up, I love me some story time with you
😍
Exciting times. I like how your brain works.
Harvey I'd be willing to bet they change the materials they used to make there pistons with those shiny new coating in those cylinders I just got one for my one project hopefully they don't chip when doing the port work .
Your last trip at Walmart.. this ought to be interesting. lol
Hey buddy..hot & humid the name of the game..nasty for working in the woods..I love Wal-Mart stories..I hate that crap hole...I still shop there...lol...
Yessir hoooooottttt...shew, yes I'm tickeled to for this chinamart story this autta be a hoot lol, yeah I'm not about no Walmart either for that matter i dont much care to go to town anyway..the stupidity concentration nowadays is to thick..nerves cant handle butvso much and..soap box..sry guys lol I'm dun
@@travisweldmaster7815 once you hang out with the ironhorse your truly addicted to his stories..lol...
@@timbarden4578 oh I know, they line up about like mine hahaha
@Slammer hahahaha nice
@Slammer hey slammer..I'm into hot nanny's..goats not my type...lol...be good brother...
Hello there iron horse hope all is well with everyone!!!
I bought some parts from him an told him i heard from u its been a few months ago though.
How'd Harvey..pretty flash cylinders ,
The crank I have in my 99 Honda is a 42 mm stroke full circle crank. It started out as a 50cc puke 🤢.
Think i have to buy a proffessional saw so i can get these parts, ive bought a crank from wolf creek
It’s awesome to learn about building a saw. I have a really nice 2009 372 I want to have built but I want a screaming work saw. And I also have a 395 that only pulls a 36” bar and chain I would love to get ported and tuned. Are you going to do anymore builds for people.
Maybe next spring!
@@theironhorse6600 ok and if do one for me I’m not a rush type of guy. I have 12 saws so it would be a saw that I don’t use very often now.
Talk abt machine clutch side down . What abt splitting crank and using 372 on clutch side. Unless your going for bigger bearing. That or is rod pin same on lower? If so put long rod on 372 crank lower.
Kind of power do you get out of a 72 big bore on your saws you think? I have a 52mm 86cc stroked 99 Honda Elite. Awls it wants to do is pull willies. I’m thinking about 10hp give or take.
HEY Harvey
Hey Payton!
Which cylinder is better, the meteor or the hyway titanikel?
How would you go putting a 394-395 cylinder on a 2100? Or 3120 cylinder??
What is better the std Nikasil or the new Titikinel??????
Hey folks!
Howdy do : )
Dont let that cat piss all over the place in there!!
Nice jug!!!
He’s not allowed in here unless I’m in the shop! No tomcat tinckles!
@@theironhorse6600 Hahahaha!!!Thats right!!!
what do you thimk of the ms400 STIHL first magnezium piston
I want to try one!
Hey Harvey what is the saw on the stove ??? Is it a Remington or Johnsered.??
I ask because I had three Saws left on the back of my truck the other day!! A Remington 5118 and a couple poulin pro saws !!
The Remington has never had gas or oil in it but someone took pull starter off of it . And I'm looking for one and the screws to hold it on !😊👍👍👍👍
Lots of cool things in the box 😊👍👍👍👍👍
The Remington is a 2015 manufacturer date !!!
That’s a j red 2171
@@theironhorse6600 I thought it was but it shure looks like this Remington!!
@@theironhorse6600 those JRED 2171 is Cracker Jack Good Saw - Many hours on mine Still plenty strong- Like the straighter bar on em
How you doing Harv? You look like you’re losing weight 👍🏻👍🏻. Question: I’ve got a farmertec 372xp. It runs flawlessly, but I want to get an oem carb just in case. Can I run an x-torq carb on that saw? Is there any benefit to running an x-torq carb? Or should I just get an xp carb? Thanks Harv!
Use an oem carb! An xtorque carb is great for saws with increased compression an a lot of port work!
what happened to his eye harv??
He was born that way.
Lol I got a 1 eyed cat too