94cc 372 build for buckin billy! how to build this saw!

[@griffinphilemon5083]

IRONHORSE, your ideas, theories and craftsmanship are are influential. You can give a rookie confidence with the way you explain things and demonstrate your knowledge. I followed all of your 272 series to build my 268. I can't be happier! As a young guy it's nice to have someone like you who's as generous as you are with their knowledge.
Take it easy and take care!

[@cargotoolshop5319]

To lower the weight of your piston, work on making your crank pin lighter, that's how the dolmar 6400 7300 7900 all use the same crank, piston diameter is the only difference between these three saws, and your cylinder fun looks like me trying to put a 038 magnum cylinder on a 038 special, thanks for the video and the stories

[@dynojoemods2764]

Super excited to see the 56mm cylinder run, and the stroker too!

[@claytonkuppler5356]

I’d also be interested in seeing the process with the crank! Thanks

[@dennisconstantine624]

Hi Harvey, another informative clip and your looking fit as a fiddle, many cheers from NZ.

[@drd1924]

I just wanted to say think you for sharing your expertise here with us.
Regardless of any badmouthers pissing up the fencepost the fact that you share so many tips and tricks
to allow us to weed through and select what we like, is truly a gift.
Thanks Man!

[@oldcat_5867]

I love to see crank work

[@claytonkuppler5356]

I just recently discovered you and your channel. Thank you for sharing all of your hard earned information! I really appreciate it!

[@Finom1]

Hello IRONHORSE, May Gad Bless and protect you and your loving family:)
Bless you for sharing your live and words of wisdom with us:)🙏🙏🙏💖💖💖
The world must realize the amazing amount of educational information that you have on your channel, Bless you for that:)

[@gustavogartner3145]

Es lindo verlo trabajar Don!!

[@marcduclos9789]

Good to hear you on this build. I am 62 and find myself leaning in to get what you’re talking about. I can dig it

[@shoresharp8349]

Good to see you Uncle Harvey, PA stumpjumper got a farmertech and has made a couple videos about it. He shouted you out , I hope to see you guys team up soon.

[@scottwilson4396]

Absolutely loving this deep end of the pool series Sir ! Even if us hobby builders at home do not attempt a build like this the emphasis on crank stresses and other theory mentioned will certainly drive home the importance of the little extras you have been showing on the simpler bolt on-ish builds ! Great to see the inter channel cooperation with Dyno Joe also 💪🏿❤️❤️

[@CharlesBrisco]

Great vid Joe does awesome work I'm looking forward to this build

[@JohnAllen-lw7xf]

Doing big things mr. Harvey! Keep up the good work!

[@RMosher11]

Thanks for sharing your knowledge. Appreciate it, learning a lot. I'm your distant neighbor from Syracuse. Take care.

[@justinweber1838]

Harv any of your content is good content! You shouldn't ever second guess yourself as to whether or not we would like seeing something you are doing or not! Keep it coming, I will watch!

[@mikahakkinen5651]

very intresting build harvey. its allso intresting how you nut it together that crank

[@chainsawcrazy9414]

Thank you so much for all your informational videos sir. Just from watching your videos ive been able to learn so much. In my down time ive been trying to teach myself porting. Your video on tranfer timing number per cc class made a lot of details click for me. I always love watching your new builds.

[@paulmcreynolds1774]

Great video. Love to watch the saw builds. Stay safe and God bless you

[@lukereinhart5387]

Incredible! I love the work you do. your attitude and care for others is the best

[@macksgarage1291]

Would love to see the crank build process!!

[@oldcat_5867]

Love the work !

[@markjoudrey7036]

That's going to be an awesome build.Thanks for sharing.

[@marklutwyche8578]

Great work iron horse, I love what you said about picky gum flappers yes I agree some people need to realise its a hobby as you say and as I always say, it's just a chainsaw, fun porting, and hi from UK nice work iron horse.

[@toddhansen5072]

New to the channel! Buckin’ and Tinman sent me! Good stuff!

[@robertdixon4554]

Would totally love to see you build the crank for the hybrid saw !

[@davidschaub271]

I would like video on crankshaft! Thanks for videos!

[@kennytheguitarfanatic054]

On the 86cc build with 661 piston. Instead of cutting .080 off the top of the piston maybe cut .050 off the squish band and .030 off the top of the piston. Maybe that would help so the top ring groove is not weak.

[@fukmajstr]

So much to learn from you Harvey thank you

[@travissteward6522]

Man o Man would I like to have one of these built by you. love the channel

[@Houseworksaws]

Man this is such an awesome project.. Seriously it’s just awesome.

[@Imageloading...]

Can we get lists for builds like this?
Pretty please?

[@crperformancetucker5065]

Id like to see the crank assembly process

[@MultiMiller71]

Sawfest in Marysville... how can I get more info?
I live in Ohio and would love to come and watch and learn.

[@Houseworksaws]

Yes please I wanna see all the crank truing..

[@wdsracer]

Awesome content subscribed

[@byerboys2607]

Hey harv might check with buckin on those dates bc he is saying 7-8-9 at the Paul Bunyan show

[@dirtytsfarm2141]

Yes on showing the crank please!

[@MarkSmith-wu8rh]

Wonder if a 3D printed jug would last 🤔seems perfect for builders cuz you can have the exact size ports , and everything . And match to any bottom end you want

[@justinweaver8787]

Hope u are well sir its hot n the timber today but im on the down hill side now wooooo lol have a great weekend sir!

[@backwoodsraised4395]

Ur awesome old boy good bad improper it don't matter!!! Hope I can make it to saw fest to meet ya

[@topchoppers7980]

I'd love to see the crank work and stuff I've been wanting to try and stroke a 660 with a big bore kit

[@kevinmaxam2414]

Great info as always. Be safe and be careful

[@MrCutterrider]

Would love to see the crank work, Mr. Harv

[@coreymiller7667]

Yes I would like to see how you stroke the true your cranks

[@famasmaster2000]

Hi Harvey, looking good buddy. Keep it up

[@AmateurLogger]

Is Odie Horses saw done yet? I was excited to see that

[@ChainsawChuckSmallwood]

Sucks the vid messed up. LOTS of good info in this!:)

[@toddhansen5072]

Yes please on showing us the crankshaft work!

[@ryankennedy3379]

I’m very interested to see the crank process

[@Hydrogenblonde]

Yes, please show dismantling and assembling a crank.

[@benhamilton8132]

Thank You for sharing

[@larrywarner9314]

That's a great idea ironhorse is like to put that sleved 390 cylinder on my 385 xp 😁😁

[@vanhaus5022]

Your hair is all cleaned up wow you must be going for a modeling job!

[@michaelschaf]

Been watching and learning for you for about a year now. First time messenger. I would wondering if you have ever worked on a ms880 and posability know timing numbers with and with out gasket and possable results from said numbers

[@bigballersofbrynsiencyn6753]

Brilliant video thank you

[@tomr2007]

This is all very interesting stuff. But, if you want to get a 94cc 372 why not just buy a 394??

[@felixbinette9752]

Hello ironhorse good to see you

[@SotTreeService]

Hey iron. Was wondering how I can have you mod my saw. 372 husky.

[@pm270100]

a lot in this vid well done 😁

[@jeffc9354]

I would love to see that on the crank

[@larrywarner9314]

Harvey is there going to be issues with ring life cus your going from a nikasil plated cylinder to a iron sleave , i know sertain rings dont like iron cylinders so is the cabor ring going to work, or the stock ring ??

[@kylecromp319]

Hey there Harv. I actually wanted to a 54mm bore and i bought the stuff to do it long ago. The. All the sudden here you are doing it. My problem is i cant find the piston like the 661s pin height in 54mm .

[@ronnijensen5944]

Love to see a minarelli booster polini evo cylinder on a husqy..

[@patrickbancroft6925]

How does one get ahold of this gentleman too do work

[@evankibbe590]

Good afternoon everyone 😊☺

[@wompwomp9]

"Or you could do what i did on" Then the video cuts off. Made me laugh Harvey.

[@adamtalamantes5684]

Hey Ironhorse

[@Mm1twiggy]

Is that shirt available in your merch store?😂

[@jensenwilliam5434]

Thank you.

[@charlesmason1278]

what I want to know is the contact info for Dyno Joe. I have a Sachs Dolmar 166 that I want to sleeve out to 58mm.

[@jodiswiger5493]

How do we get ahold of you to get work done

[@ivanhamlyn]

Tell us about that woodstove

[@nateolmsted899]

Love it

[@treeassassin8833]

Hey ironhorse I was thinking about putting a 394 top end on a 288 what's ur thoughts

[@joshuajohnson4396]

Love you brothers and sisters

[@allenlong3939]

Hey bud long time since we spoke. Hope all is well with you.

[@andreacesaro2842]

Buona sera volevo sapere dove a acquistato cilindro e pistone 94 cc per 372 xp

[@tribulation138]

Should add a second ring

[@byerboys2607]

Hey harv names Bryan I live in Ohio not far from the saw fest I was wondering if I bring the top cover to my n.o.s red switch 044 magnum if you would autograph it for a fella Iam gonna try and get buckin to do the same if I can I wish I tin man was coming but he just had the baby and such so a fella understands that for sure thanks for your time harv
Thanks Bryan w. Aka byerboys

[@theironhorse6600]

Sure will!

[@byerboys2607]

@@theironhorse6600 ok sounds good sir I’ll see ya there just look for a twin Twin to ya but a bit younger lol 😂

[@CL-ty6wp]

anyone know what happened to bayou country saws?

[@playingwivwood]

Hows the pioneer comin with the 372 top end

[@garengtutorial8923]

Halo bos. Apa kah husqvarna 365 bisa pakai cylinder 372

[@theironhorse6600]

Yes it can!

[@garengtutorial8923]

@@theironhorse6600 oke bos kalau ada video nya cara memasang cilinder 372 di mesin 365 nya

[@bentwedgestanleybrand5818]

Hello everyone

[@tylercritelli587]

Harv have you ever worked or ran a stihl 441 carb non m tronic

[@theironhorse6600]

Just got one for myself today! Gonna be interesting!

[@chuckmason7930]

@@theironhorse6600 you may not like it. It's like a 372 that got everything wrong. At least the 1138 chassis is. I would rather take on 5 044 saws than one 441

[@jaredmessmer8879]

Does anyone know if you can get meteor or highway pistons for Stihl 041 or am I just s.o.l? Is it one of them saws once it's blown it's scrap because you can't find parts anymore

[@transdimensionalist]

theres some on ebay from other brands, even genuine Stihl, but no hyway or meteor

[@kevinjones2667]

I've got an 046

[@williamdonnelly4671]

My idea of a big saw is 64cc

[@theironhorse6600]

After cutting firewood all day I agree with you!

[@TonaldDrump686]

394/5 transfers don’t look like that,
Guessing it’s a 390 cylinder due to modern transfer design.

[@tomnielsen6439]

Did you forget to tell us why you would use Seal All on the cylinder????

[@richpitty]

Why is it that people need to give you a hard time for doing things your way if it works who care johns custom saws says he gets shit all the time he knows what he’s doing why so much bashing?

[@mattfleming86]

seems to be two kinds of people that do this. You got the ones who like to teach and like to learn.. and then you got the type whose mom didn't smack em enough when they treated other people like crap.

[@ronsilva516]

I hear what you say all these folk who say my saw is better than your or my wood is harder than yours junk