2020 Honda CRF250L ProTaper Bar Install
ฝัง
- เผยแพร่เมื่อ 27 ก.พ. 2021
- ProTaper Woods High
amzn.to/3upxXQn
ProTaper Adapter
amzn.to/34tvVDO
2020 Honda CRF250L ProTaper Bar Install, I used the protaper woods high but chose whichever one you want. keep in mind the stock bars and mounts are for a 7/8 bar so you if you are buying a 1 1/8 bar you will need to get the adapters too like I did in this video.
Instagram @scouts_out_yt
EPIDEMIC SOUND
www.epidemicsound.com/referra...
-Camera/Editing Gear I use-
-GoPro Hero 9 Black-amzn.to/3uTAwqs
-Max Lens Mod-amzn.to/3wQF4zo
-Media Mod-amzn.to/3uW8Tx3
-DJI Pocket 2-amzn.to/3vU6XGx
-DJI Mavic Air 2-amzn.to/3uOgn5a
-Canon EOS RP w/ 24-105 IS STM amzn.to/3uVDJpo
-RF 50mm f/1.8 STM amzn.to/3gf6msp
-RF 35mm f/1.8 IS Macro STM amzn.to/3gmRoRs
-RF 24-70 2.8 L amzn.to/3crUO3Z
#2020HondaCRF250L #crf250l #protaperbars - ยานยนต์และพาหนะ
Where did you get the mirror?
I bought them from Amazon they aren’t amazing but they worked ok
amzn.to/3xkTIRs
Finally an install video that doesn't gloss over the install of the controls. Everyone says to remove the dowels and tape but that didn't work for me at all. Going to purchase new controls since I removed the dowels from mine and drill the bars.
Ohh dang that’s sucks man, I’m surprised people would say to remove them. Glad the vid was helpful
The video is very informative. Thanks a lot
Glad it was helpful happy holidays
Like 7 buddy another great dismantle and remix good job
Thanks Fran, much appreciated
Legit just made a video installing these on my channel. Your vid was certainly helpful! Subbed to see more content💪💪
Thank you, I’ll have to check yours out..cheers
I know you have listed your cameras, etc., but wanted to drill down on a specific question. What are you using for your riding set up. What Camera, Helmet Mount, and Mic are you using?
Another question about the camera....I'm a total idiot when it comes to them. Are you just constantly recording? When I ride, I would love to capture some "once in a while" situations,.etc., but I don't really want to record the entire ride. Ideally, I'm hoping that maybe you could set up the camera where it's doing like a 5min record loop...then something happens that you want to capture, you hit a button, the past 5min gets "saved", and then it goes back into this looping....where it's recording, but not saving. Does it have anything like that?
Back in the fall, I had a great day ride that was around 6 hours of riding. I wouldn't want all that recorded, but there were about 5 or so things that I would have loved to have captured....the near miss with a deer would have been one of them.
For the helmet I'm using a Shoei GT Air, GoPro mount on the chin of the helmet held with Sugru glue. As for camera it's a Hero 9 with the media mod and max lens mod. the media mod gives you a mic output and the max lens mod just gives a wider angle of view which is opinion based whether you like the wider angle or not. As for the microphone that is where I'm lacking for quality, I don't know what kind of mic I have I bought a pack of 2 off amazon several years ago and they are not good. I will probably buy a RODE Lav Mic when they are back in stock at B&H again. I also tried a RODE Wireless go in my helmet and it sounded horrible, what I realized is the mic needs to be farther from my mouth. In the review video I did the mic was mounted under the padding in the back of my head.
As for the loop recording that would be cool, and with a quick google search I guess most have a loop feature and I don't know how to turn in on yet put it does say you cannot enable protune if you have loop on which I wouldn't be interested in not having on. It does get old sifting through hours of footage, I hope this is helpful..cheers!
great video thanks - just wondering what dimension bars you used and what clamp adaptor you used - looking to copy that exact set up - thanks
Links to both are in the video description
nice and informative video i m still confuse, some Pro Taper they dont need to drill a hole for the CLF250L model,, please advice, thanks
I've honestly never heard of protaper pre drilling holes in the bars for specific bikes. Mainly because they come long for you to cut them down to the size you want which would make the hole locations different for everyone
I just changed mine for a renthal one idk if i messed up my drilling or wtv, i also installed heated grip and now my throttle wont snapback when i let go :(
Ohh no, did you buy new grips? If not the grip needs to be on right if it doesn’t snap back don’t go out riding until you figure out why
Noticed you changed the bar clamps a couple times from protaper facing outward to inward. Was there issues being one way over the other?
The pro taper pad wouldn’t fit on with it the other way
@@ScoutsOut is it bad to install the clamps the other way? Or this way is if you want pad to fit? What about cables are they pretty tight with a slight higher bar and clamp
I’m not sure if it would be wrong to mount them the other way. As for the cables they still have room, all the way to lock on the left is the tightest and it still has play in it
I dropped my 300L using the kickstand in the dirt.
After going through chemotherapy last year, I could barely pick the bike up.
It was a real struggle.
I could use some upgrades.
Dang sorry to hear that, it suck a good bike but it is very heavy
I hope everything goes well for you man and I hope you enjoy your 300l as much as me.
I'll bet it feels like a whole new bike, nothing like updated quality controls. You are lucky the stock bars didn't bend when you tied the bike down in the back of the truck, some are about as strong as aluminum foil 🤣
Lol yup, the stock bars suck. Much better now
Hi
Do you have lot number for handlebar type and riser?
Yea for sure, the bars are contour woods high 027957. The mounts are universal solid 022821, the mount is not really a riser as much as a conversion from the smaller 1-1/8 stock bar mount to the 3/4 mount which is needed for the larger bar. Hope this helps...cheers!!
Could you post up the part numbers for the bars and bar adapters please.
ProTaper Woods High
amzn.to/3upxXQn
ProTaper Adapter
amzn.to/34tvVDO
Why are the risers oriented first inwards and then outwards...???🤔
Good catch, the pad on top wouldn’t fit
what size and lenght is the pro taper handle?
I believe it starts at 800mm and has options for cutting it down
thanks
Glad it helped 🍻
Any issues with the clutch cable length at full lock turn? I have a 2020 and I’m about to do this.
no there was plenty of room for the bars and adapters I used
@@ScoutsOut I worried because I’ve seen mixed comments on that not that I don’t believe you. I just don’t want issues after spending $100 and time to install
@@DStabs720 I hear yea, I just went out and moved it lock to lock and all the way left would be the tightest point and it still loose, I can send you vid and pics on IG if you want to feel better about it scouts_out_yt
@@ScoutsOut you may have changed my mind haha. I don’t have an insta but i believe you. I really want a different bar setup
@@DStabs720 yea the pro taper bars are nice, I was surprised I bent the stock on such a lame slow crash
Hello there, greetings from Greece. What brand are your mirrors? Any link so i can buy them?
Greeting from Germany at the moment! I bought them from Amazon they aren’t amazing but they work ok
amzn.to/3xkTIRs
Prost! Enjoy that ouzo!
Thanks for the immediate response ...I prefer beer this season because the weather is really hot...p.s plan a trip here 😊
Man I want to so bad, I have a friend that has a hotel out there I guess and have been wanting to go. It would be amazing
@@ScoutsOut what's holding you😊
Expensive flights, but hopefully in the next few years I’ll just do it
ProTaper Woods High
amzn.to/3upxXQn
ProTaper Adapter
amzn.to/34tvVDO
This handlebar does NOT fit with the CRF300L at all! WARNING DO NOT BUY IT!
Interesting, in what way is it not fitting on the bike?
@@ScoutsOut It is too big to fit! I get my money back now so no worries. But this is just pure rubbish handlebar really!
Sry you think that, when you buy these bars you have to by the conversion plates that go between the mounting point on the bike and the handlebars. Without the brackets they do not fit the adapters are 7/8 to 1 1/8, and I should have talked more about that in the video description
@@ScoutsOut What is the point to buy a handlebar that does not fit the bike then buy an adapter brackets same prize as the handlebar to even have it fit? That is pure stupidity!
The stock bars are made of steel and bend very easily in a crash, there are many benefits from changing them out, sry that you don’t feel that way. I’m glad you got your money back, cheers
😇😇😍😍🛠