If you have some repair topics that you are interested in or suggestions for us, please leave your comments here.👇👇👇 Repair Tools: bit.ly/3xNI54w Live Course Entrance: bit.ly/3jV7nto
could a similar method be possible with the dot projector? Reprogramming the dot projector on a new front camera assembly instead of having to repair the old dot projector?
Sure it is possible but still you need to transfer IR camera. Dot projector is not unique data stored in encrypted ic is unique. But if flex is damaged you need to fix flex because data is in encrypted ic.
Have you tried this, or know anyone who’s tried this? I’m considering buying this setup for my business, but if I’m unable to remove the jailbreak afterwards and keep Face ID I’ll have to pass.
I think it won’t work because you are programming the phone to remember the NEW number the iPhone has to look for. Unless!! This changes the serial on the actual ear piece! Then it should work even restoring the phone I’m sure
You don’t need to jailbreak if you have the v1se. If you have the old flex, connect it to the v1se, read the data, connect the flex, write the data and then assemble the phone. If you don’t have the old flex, connect the whole phone to the v1se via usb. It will pull the data from the motherboard. Write the data to the new flex and then assemble the phone. I’ve never had to jailbreak a phone to do any programming with the v1se.
You don’t need to jailbreak. I never do. You need the v1se. If you have the old flex, connect it to the v1se, read the data, connect the new flex, write the data and then install. If you don’t have the old flex, connect the phone to the v1se via USB, read the data and then write the data to the new flex.
I never jailbreak. If you have the old flex, you plug it into the v1s so that it can read the data and then write to the new flex. If you don’t have the old flex, you plug the phone into the v1s via usb and it pulls the data from the motherboard. Then you write the data to the new flex.
The front cameras are what control True Tone, Face ID and the proximity sensor is what turns the screen off when you hold the phone up to your ear during a phone call.
I bought this device and I've tried emailing to get some help with the "IIC chip not recognized!" error when using the software. It's been two weeks. Why is it so hard to reach anyone from your company??? I'm a new customer and the complete lack of any help is incredibly concerning.
Most Chinese companies have zero after sales support. Communication is a joke. Nobody speaks English there so you can be sure that once you buy from most companies, they don't even reply to your messages.
Jailbreak is done only to read the data. The data has been programmed to the new flex cable. Even if the phone is factory reset, there is still data in the flex cable. There will be no problem. Sorry for my bad English
@@justtavi1238 apple wont be able to patch because the phone already recognizes new flex. Apple done the same thing if you replace screen from them so I think Jc figure how apple done it
It looks great ! but.. Can I use ANOTHER receiver fpc? OR ONLY "JCID" receiver FPC recommended? If the "JCID" FPC IS COMPATIBLE with X and XS, Can the same be used for both? Thank You REWA
My face id is working but my mom threw away the original earpeace flex cable how do I restore face id if I purchase 3rd party earpeace flex cable any help please.
Rewa kindly reply to a customer who bought the j box but his getting an error on llc chip whilst using the software, it’s a concern for customers like me who would like to be interested in buying these tools
My earpiece isn’t working but Face ID works fine. Do I need the Jbox to jailbreak as well as the J1S or the J1S only with the appropriate board to read/write the flex cable data?
You only need the v1se. If you have the old flex, connect it to the v1se, read the data, connect the new flex, write the data and then assemble the phone. If you don’t have the old flex, connect the whole phone to the v1se via USB. It will pull the data from the motherboard. Connect the new flex, write the data and then assemble the phone.
Jailbreak is done only to read the data. The data has been programmed to the new flex cable. Even if the phone is factory reset, there is still data in the flex cable. There will be no problem. Sorry for my bad English
1:50 what is an unlock exactly? like unbinding the wifi but for the sensor? I haven't purchased the J-Box yet so could I do that only using jailbreak? thanks
From Xs to 12 (only iOS 14.5.1) we get a jailbreak using uncover 7.0.2, in the settings and put additional checkmarks on install openssh and reinstall cydia without them, the box will not see JB. Next, we read our SN and flash it into the display! Ready!
Face id dont work x,Xs,Xs,max,11,12? Jailbreak then jbox then face read Copy plus read And everything work? Pls to answer rewa I wont to buy jbox and i have icopy plus
Bro please reply in ios update 17.3.1 in i phone 11 its possible to restore true tone with jcid some people says ios 17.3.1 is no more to restore true tone restore with jcid
I’m on 14.3 with my iPhone XS and jailbroken with unc0ver. I got the V1S and wanted to write the information to the new JC flex. The V1S tells me that the phone isn’t jailbroken but it is. It even asked me to unbind with JBOX but I thought JBOX was only used to jailbreak iPhone X and below. Is there something that I’m missing?
acctually no it wont. This is only for the iPhone X as the checkm8 exploit is only available for iPhone X and lower and this is what is needed to jailbreak!
Great video, I got just one question, as the description says, models after the iPhone XS, this means if i got my iPhone X face id flex damaged, i could replace it with a new one and still keep Face ID and True Tone working ?
Yes. If you don’t have the old flex, connect the whole phone to the v1se via USB. It will pull the data from the motherboard. Then connect the new flex to the v1se and write the data. Assemble the phone and you’re done. The old flex isn’t needed, but the v1se, or another programmer is essential. You need a way to read and write the data.
The only thing you need is the v1se. If you don’t have the old flex, connect the whole phone to the v1se via usb. It will pull the data from the motherboard. Then connect the new flex to the v1se and write the data. Assemble the phone and you’re done.
Short answer: No. Longer answer: Apple uses only Apple silicone, A11 Bionic in the case of a iPhone X (so no Qualcomm CPUs are gonna go on an iPhone) and each iteration is different in design so even if they look the same, they won't communicate with the motherboard the same way. Also, many components one the motherboard are tied with the CPU meaning they won't work if they don't match. I honestly don't know if someone tried to reprogram an Apple CPU but it sounds like a massive undertaking.
@@safin2155 since it's an apple video I thought your were talking about an iPhone. However, the answer is still no. You can try overclocking the CPU but upgrades are impossible for the same reason you can't upgrade iPhone CPU, minus the serial number check. You can technically change the processor but only with the same one (A11 with A11, 732 with 732, 860 with 860...). And a brand new CPU won't work better than a used one, CPUs slow down because of software upgrades and thermal paste getting too dry, promoting overheating.
If you have some repair topics that you are interested in or suggestions for us, please leave your comments here.👇👇👇
Repair Tools: bit.ly/3xNI54w
Live Course Entrance: bit.ly/3jV7nto
can this work for other iphones
Just wondering if this is possible with the home button in the future
Rewa technology
What about xs xsmax and above which are unable to jailbreak
Get an iPhone sales app
@@elriclevantine753 Hi, currently this solution supports iPhones up to 11 Pro max
could a similar method be possible with the dot projector? Reprogramming the dot projector on a new front camera assembly instead of having to repair the old dot projector?
Sure it is possible but still you need to transfer IR camera. Dot projector is not unique data stored in encrypted ic is unique. But if flex is damaged you need to fix flex because data is in encrypted ic.
And then u can restore to normal ios and faceid will work? Or the device must have the jailbreak?
Fantastic, you’re always on top
You are great sir
Same issue in my Xs max but no solution in whole pakistan i try soo much by the way you are always a top i am a big fan of yours sir
Hi, what will happened if I remove jailbreak after reprogram new part, is it gonna work?
Have you tried this, or know anyone who’s tried this? I’m considering buying this setup for my business, but if I’m unable to remove the jailbreak afterwards and keep Face ID I’ll have to pass.
I think it won’t work because you are programming the phone to remember the NEW number the iPhone has to look for. Unless!! This changes the serial on the actual ear piece! Then it should work even restoring the phone I’m sure
It does work even after restoring, Doesn't make sense if it does not work after restoring or re-starting the device
You don’t need to jailbreak if you have the v1se. If you have the old flex, connect it to the v1se, read the data, connect the flex, write the data and then assemble the phone. If you don’t have the old flex, connect the whole phone to the v1se via usb. It will pull the data from the motherboard. Write the data to the new flex and then assemble the phone. I’ve never had to jailbreak a phone to do any programming with the v1se.
Hi expert . my iPhone XS Max has True Tone but not detect face id?? Please guide me .. thanks
By the way: video is so cool. Too sad that Apple prevent us from fixing our devices.
after finishing all the process, can I update my Iphone with the original software or do I will need the jailbreak?
You don’t need to jailbreak. I never do. You need the v1se. If you have the old flex, connect it to the v1se, read the data, connect the new flex, write the data and then install. If you don’t have the old flex, connect the phone to the v1se via USB, read the data and then write the data to the new flex.
is the Jbox required to backup the sensor's data? or can I just use the V1S and backup the data using that?
I never jailbreak. If you have the old flex, you plug it into the v1s so that it can read the data and then write to the new flex. If you don’t have the old flex, you plug the phone into the v1s via usb and it pulls the data from the motherboard. Then you write the data to the new flex.
Please explain how true tone is related to the face I'd flex cable?
The front cameras are what control True Tone, Face ID and the proximity sensor is what turns the screen off when you hold the phone up to your ear during a phone call.
To day I need this video thanks rewa
I bought this device and I've tried emailing to get some help with the "IIC chip not recognized!" error when using the software. It's been two weeks. Why is it so hard to reach anyone from your company??? I'm a new customer and the complete lack of any help is incredibly concerning.
did you ever get the help you needed? I own a phone repair shop in Canada and am debating on buying this, however this comment is concerning lol
oh
@@jordanirvine3787 jailbreak is basically dead so rip
Most Chinese companies have zero after sales support. Communication is a joke. Nobody speaks English there so you can be sure that once you buy from most companies, they don't even reply to your messages.
Would like to buy this tool did it work on llc chip?
But what if we factory reset the device will faceid remain even if it’s not jailbroken
J-box requires Jailbreak to read data i think , then the programmer is writing same data as motherboard to earspeaker.
Jailbreak is done only to read the data. The data has been programmed to the new flex cable. Even if the phone is factory reset, there is still data in the flex cable. There will be no problem.
Sorry for my bad English
@@justtavi1238 Thanks! For your answer this sounds great, until apple patches this 🙁
@@oliver_lauritsen_oa Rewa will find another solution probably 😂
@@justtavi1238 apple wont be able to patch because the phone already recognizes new flex. Apple done the same thing if you replace screen from them so I think Jc figure how apple done it
Is necessary the jailbreak jbox to reprogram the earpiece if yo have the old one?
If you have the v1s, you don’t have to jailbreak. The v1s does everything for you.
muito bom, é aqui onde muitos Brasileiro aprendem, e depois colocam em curso super caros.
Sim, mas vale lembrar q esse procedimento só é válido para o iPhone X, pro XS em diante don’t work
After u jailbreak using checkrn, can u use only the jcv1s and skipping the j-box step?
It looks great !
but..
Can I use ANOTHER receiver fpc? OR ONLY "JCID" receiver FPC recommended?
If the "JCID" FPC IS COMPATIBLE with X and XS, Can the same be used for both?
Thank You REWA
Now if you guys could just show us an icloud lock bypass life would be complete
My face id is working but my mom threw away the original earpeace flex cable how do I restore face id if I purchase 3rd party earpeace flex cable any help please.
You need the v1s. Connect the phone to the v1s via USB. It will pull the data from the motherboard. Then write the data to the new flex.
It will work after restore ? Or jailbreak needed every time ?
Work after restore
You don’t need to jailbreak if you have the v1se. I do this all the time and I’ve never needed to jailbreak a phone first.
Can I send my phone to be repaired by you I think I have same problem because my Face ID is not working and True Tone is not available
Rewa kindly reply to a customer who bought the j box but his getting an error on llc chip whilst using the software, it’s a concern for customers like me who would like to be interested in buying these tools
My earpiece isn’t working but Face ID works fine. Do I need the Jbox to jailbreak as well as the J1S or the J1S only with the appropriate board to read/write the flex cable data?
Did you find a fix for this? I have a phone with a similar issue!
No Bro , u can Just repleace the earspeaker on the original flex
You only need the v1se. If you have the old flex, connect it to the v1se, read the data, connect the new flex, write the data and then assemble the phone. If you don’t have the old flex, connect the whole phone to the v1se via USB. It will pull the data from the motherboard. Connect the new flex, write the data and then assemble the phone.
Would this work on all iPhones?
If it’s jailbroken yes
You don’t need to jailbreak. I do this daily with the v1se and I’ve never needed to jailbreak before reading and writing data.
Hello rewa. Do the iPhone Xr icloud bypass is already available?
Custom ispw
@@aamanmirza5004 where can I get that please?
Would this work, if you un-jailbreak the iPhone? Or the iPhone needs to be jailbroken to keep the face id working?
Jailbreak is done only to read the data. The data has been programmed to the new flex cable. Even if the phone is factory reset, there is still data in the flex cable. There will be no problem.
Sorry for my bad English
@@justtavi1238 Thanks for reply ❤️
As long as you have the v1se, you don’t need to jailbreak. I do this daily and I’ve never needed to jailbreak a phone.
What platform do you use to jailbreak the iPhone.
Great video, can we do this with QianLi icopy?
1:50 what is an unlock exactly? like unbinding the wifi but for the sensor? I haven't purchased the J-Box yet so could I do that only using jailbreak? thanks
From Xs to 12 (only iOS 14.5.1) we get a jailbreak using uncover 7.0.2, in the settings and put additional checkmarks on install openssh and reinstall cydia without them, the box will not see JB. Next, we read our SN and flash it into the display! Ready!
Would the JC flex still working if i un-jailbreak the phone x and restore it to official factory settings?
Yes
If I restore the iPhone and remove jailbreak, will the face-id continue to work or it will stop working ?
You don’t need to jailbreak. All you need is the v1se. I do this all the time and I’ve never had to jailbreak a phone before programming.
does this work for an iphone 12 pro max ?
Good job, guys!!!
Thanks thanks thanks thanks thanks rewa...
can use this jailbreak tool on iphone xr etc sir ?
Face id dont work x,Xs,Xs,max,11,12?
Jailbreak then jbox then face read
Copy plus read
And everything work?
Pls to answer rewa
I wont to buy jbox and i have icopy plus
XR too same can bro ?? Help me ❤
You don’t need to jailbreak if you have the v1se. Connect the flex to the v1se, read the data, connect the new flex, write data. That’s it.
Bro please reply in ios update 17.3.1 in i phone 11 its possible to restore true tone with jcid some people says ios 17.3.1 is no more to restore true tone restore with jcid
Yes.
After Sour replace and reprogramm the Face id, can you remove the Jailbreak?
Of course you can remove the jailbreak
@@airmaxbg but will Face id still Work without the Jailbreak...thats tue question😁
You don’t need to jailbreak. I use the v1se to do this on a daily basis and I’ve never needed to jailbreak a phone.
But when you jailbreak the iPhone it is not longer a iPhone? and it can´t being update?
Can we use this for XS/XS Max ???
Coz can’t jailbreak those models
Any solutions ????
Can you do this with icopy?
I’m on 14.3 with my iPhone XS and jailbroken with unc0ver. I got the V1S and wanted to write the information to the new JC flex. The V1S tells me that the phone isn’t jailbroken but it is. It even asked me to unbind with JBOX but I thought JBOX was only used to jailbreak iPhone X and below. Is there something that I’m missing?
you re great sir liked from nepal
you can do the process with the iOs 15.1
Does this work for XR, XS, 11 and 12 series as well? And what happens if phone is restored after jailbreak
im not sure about those models but... it should work fine, as the data had been burned into the earpiece flex cable :)
acctually no it wont. This is only for the iPhone X as the checkm8 exploit is only available for iPhone X and lower and this is what is needed to jailbreak!
Message clintontech78 on !G he's the best solution ever💯.
@@jaketaylor9961 We just have to wait until there is a new jailbreak. There was one for every ios version in the past, it just takes time.
Does it have to be jailbroken because most iPhones are on iOS 15 up now
Great video, I got just one question, as the description says, models after the iPhone XS, this means if i got my iPhone X face id flex damaged, i could replace it with a new one and still keep Face ID and True Tone working ?
Message clintontech78 on !G he's the best solution ever💯.
@@arowoloabimbola432 he’s just a scammer, thx anyway
Yes
Only if you get the earspeaker flex damaged you can reprogram it. The front camera assembly is irreplaceable
You can program the front camera with the v1se. I do it daily.
how about activation lock? can you fix it?
Where can I drop my cv for learning this 😊😁😁
Hi, you can join REWA Academy now: academy.rewa.tech
i bought qianli is it same as this j2c?
Does Face ID work with Ambient light sensor ?
Jailbreak need to stay, or after reading number from iphone it can be factory reset and flash again to normal state?
yes, the data is in flex
i have an issue and it says face id is not available try again later, this happened after i fixed the dot projector, please HELP
Sir my big problem ios 15 no jailbreak how to read face id data
You need a programmer (v1se). You don’t need to jailbreak.
Any Solution For Thr Problem Getting An Erir Comes On Iphone X A Problem Was Detected With The TrueDepth Camera. Face Id Has Been Disabled
Will it still receive update IOS even if it was jail broken?
O meu flex original rasgou . Isso pode ser feito sem o flex e original ?
Yes. If you don’t have the old flex, connect the whole phone to the v1se via USB. It will pull the data from the motherboard. Then connect the new flex to the v1se and write the data. Assemble the phone and you’re done. The old flex isn’t needed, but the v1se, or another programmer is essential. You need a way to read and write the data.
This method is working in Touch ID PROBLEM?
Is this possible without the J-BOX?
Hi, is this work also if original earpiece flex destroyed?
The only thing you need is the v1se. If you don’t have the old flex, connect the whole phone to the v1se via usb. It will pull the data from the motherboard. Then connect the new flex to the v1se and write the data. Assemble the phone and you’re done.
Goood this work only for iPhone X and xs
So basically this only works if you have a iOS version that is jailbreakable.
You can jailbreak any version after some time. You just have to wait until your Version is available to read the Infos.
Does this work for iPhone 11 Pro Max? Is there a connection for the 11 Pro Max on the JC V1S device?
No, only checkm8 devices (up to 8/X year), XS-present won't work, though they may in future with other jailbreak methods.
is this method work for iphone 11?
hello friend is it possible to repair the Face ID without the original dot projector
It’s not possible
Nice job 👌🏻
From where to get these devices
Does it still work?
Nice content! Keep it up!
Thanks from sharing♥️♥️
What about ip xs max ?
Working too or not ??
Mi può mandare il link dove acquistare i due componenti?
IS the j-box mandatory to do this procedure?
No. But the v1se is mandatory. You need some type of programmer to read and write data.
Does it work for xs
will this work on iphone 11?
@REWA
You’re always respected
this jbox will work in ios 15?
Any solution for Touch ID iPhones?
Where do you get these j boxes?
How can i get my phone to you for repair….face id
Xsmax
Does this method work if it’s my dot projector that’s not working?
Hi, yes, V1S can also repair the dot projector.
Message clintontech78 on !G he's the best solution ever💯.
awesome, Thank you for sharing
iphone xs to 12pro can’t be jail broken. So this works for iPhone X only correct ?
wow，only you realized
How jailbreak on ios 17?
please what about the finger print
So you don't even need the original flex cable anymore?
Burn the data from it
You saved iPhones !!!!
how many do you pay for it ? to fix your iphone x face id
Is it possible to defeat those stupid encryption and pairing of components?
My phone camera didn't work front and back both
Wow tnqs thes information
nice but the tools is so expensive
is it possible to icloud unlock an iphone 11 pro max?
iOS 15 jailbreak not available face id not available after update
I was jb ok but earpiece lock how to unlock
thak you soooomoch
Tnx sooo helpful
Can you change the processor
Or upgrade them.?
Will it work.?
Like Snapdragon 732 to 860 or better versions?
Short answer: No.
Longer answer: Apple uses only Apple silicone, A11 Bionic in the case of a iPhone X (so no Qualcomm CPUs are gonna go on an iPhone) and each iteration is different in design so even if they look the same, they won't communicate with the motherboard the same way. Also, many components one the motherboard are tied with the CPU meaning they won't work if they don't match. I honestly don't know if someone tried to reprogram an Apple CPU but it sounds like a massive undertaking.
@@benjaminwilson8183
I mean in Android phones .not in ios
Message clintontech78 on !G he's the best solution ever💯.
@@safin2155 since it's an apple video I thought your were talking about an iPhone.
However, the answer is still no. You can try overclocking the CPU but upgrades are impossible for the same reason you can't upgrade iPhone CPU, minus the serial number check.
You can technically change the processor but only with the same one (A11 with A11, 732 with 732, 860 with 860...). And a brand new CPU won't work better than a used one, CPUs slow down because of software upgrades and thermal paste getting too dry, promoting overheating.