Thank you so much Mike I took your micro soldering course on udemy during December. My journey is beginning like yours. I had this issue with iphone 11 pro max recently ear speaker torn flex. The back side at 250c with low to almost no airflow is super easy and flux does mess with certain components. Oem ear speakers that are soldered are better than taped on. Mobile Sentrix has lots of good product some obscure items can be hit or miss though for obvious reasons. I'm slowly getting the shop to invest in me and the business. Yes that means we won't have as much to bring to you anymore unless I'm stuck or back logged. I only spend total of 180 minutes Max on any one device. Thanks for your skill share and talent sir. I hope to meet you in the near future and possibility get an in person hands on with my own person project (ipad mini 2 digitizer fox replacement). DMV showing support for it's own thanks again Brother.
Thank you my friend! My ambient light sensor just ripped (the cable that connects it to the other parts ) can I somehow fix that or just connect it to the iPhone again without looping?
Grate to see you Mike , I trust your doing well , it’s been a while since you have been on !?! Great video , clear , precise and very helpful cheers mate
He did it right.. most people that do the donor transplant only move the flood illuminator unit and skip ALS which kills True Tone and I like to stay as true to OEM as possible.. nice job
Hello, thank you for the video, I just replaced my battery and display and in process the flex cable broke, so would you do this to my original I am not equipped or experienced to do the replacement please let me know if you can, for a fee thank you in advance.
Transferred my chip following this video's instructions. Everything went perfectly, except the face ID still didn't work when i booted up the phone. I guess it was worth a shot.. I can't say for sure every pin on that sensor is perfectly soldered, no way to tell other then to put it in place and hope😢
Hi. Thank you for your educational videos. About this video, I wonder if I have to move both the sensor and the earspeaker, or only moving sensor to a new cable will do.
I added just a tiny bit of flex before soldering, went straight through sensor, also somehow I melted the sensor using 270C. I really don't understand how you did not melt it going at it from that angle.
Hi. Can you advice me possible fix for faceid in iPhone X ? I have 4 iPhones X damaged 1. PROXIMITY OK CALL SPEAKER OK ANIMOJI OK (FOLLOWS WHEN MOVING HEAD) FACEID: OPENS SETUP SCREEN BUT STUCK ON PLACE YOUR FACE WITHIN THE FRAME ALERT PORTRAIT MODE FRONT FACING CAMERA : FAIL ,NOT MAKING BLUR IN THE BACKGROUND 2. PROXIMITY FAIL CALL SPEAKER OK ANIMOJI OK FACEID OK PORTRAIT OK 3. PROXIMITY FAIL CALL SPEAKER FAIL ANIMOJI OK FACEID IS NOT AVAIABLE ALERT PORTRAIT MODE FAIL 4. FLEX WITH SENSORS CAUSING BOOTLOOP , THIS FLEX WAS TESTED WITH 3 OTHERS IP X MOTHERBOARDS AND SAME ISSUE RESULT BOOTLOOP
I’m confused, all other videos from Chinese repairers state it’s the dot projector that is paired,. They then use various tools that transfer data from dot projector flex to a new flex and Face ID works, however, you state it’s the proximity sensor that is paired. Plus, I personally just swapped out the whole front cable without any problems! Hope you can clarify. Thanks
Depending on what is damaged, you repair accordingly. If ear flex cable is damaged then swap the flood illuminator. If dot projector is damaged then its the dot projector need to be swapped
That's not true. I just fixed 1 flex ripped out by a client of mine when he tried to change the screen by himself. First i had this problem , move the iphone higher an lower caused by a short (my bad) between pins 15,16,17,18 and 5,7,9,11,13. I've fixed the short and problem solved, now it's working perfectly
@@smartfixAltea correct n I witnessed it too. Positioning the heat is vital. Understand the purpose of the heat n make sure deliver the heat carefully so it will will melt n come off. Experience is the key or it will burn the ic or sensor n not able to remove the component
Thank you so much Mike I took your micro soldering course on udemy during December. My journey is beginning like yours. I had this issue with iphone 11 pro max recently ear speaker torn flex. The back side at 250c with low to almost no airflow is super easy and flux does mess with certain components. Oem ear speakers that are soldered are better than taped on. Mobile Sentrix has lots of good product some obscure items can be hit or miss though for obvious reasons. I'm slowly getting the shop to invest in me and the business. Yes that means we won't have as much to bring to you anymore unless I'm stuck or back logged. I only spend total of 180 minutes Max on any one device. Thanks for your skill share and talent sir. I hope to meet you in the near future and possibility get an in person hands on with my own person project (ipad mini 2 digitizer fox replacement). DMV showing support for it's own thanks again Brother.
This gentlemen gives a whole lot of information n it’s on point. His videos helped me a lot.
@@johnnyjeffery8948 knowledge is power, good information like this is knowledge. Thanks for sharing mate
Thank you my friend! My ambient light sensor just ripped (the cable that connects it to the other parts ) can I somehow fix that or just connect it to the iPhone again without looping?
Grate to see you Mike , I trust your doing well , it’s been a while since you have been on !?! Great video , clear , precise and very helpful cheers mate
He did it right.. most people that do the donor transplant only move the flood illuminator unit and skip ALS which kills True Tone and I like to stay as true to OEM as possible.. nice job
Hello, thank you for the video, I just replaced my battery and display and in process the flex cable broke, so would you do this to my original I am not equipped or experienced to do the replacement please let me know if you can, for a fee thank you in advance.
Transferred my chip following this video's instructions. Everything went perfectly, except the face ID still didn't work when i booted up the phone. I guess it was worth a shot.. I can't say for sure every pin on that sensor is perfectly soldered, no way to tell other then to put it in place and hope😢
Can I send you an OEM Flex and an aftermarket? And have you transfer? How much?
Hi. Thank you for your educational videos. About this video, I wonder if I have to move both the sensor and the earspeaker, or only moving sensor to a new cable will do.
Only the sensor needs to be moved
Hi, what's your price for repairing iPhone XS Max's face ID? Can you repair iPhone's "move iPhone a little higher/lower” issue? Thanks.
Also, what's the name of this tool that you showed us in this video? Thank you. Will this affect other functions of iPhone?
How much do you charge to repair this? Mine ripped after screen replacement
Hey man how much do you charge for the repair ???
Can I send you an original and an AM and have you transfer the Flood Illuminator? And how much?
Thank u pro❤❤
Mine is making my iPhone XS Max get stuck on Apple logo when I connect it to the motherboard what can I do to fix that problem?
Bad flex to flood illuminator or make sure you solder both the old and the flood illuminator evenly
Please, how do I know the earpiece flex have not been replaced before?
I added just a tiny bit of flex before soldering, went straight through sensor, also somehow I melted the sensor using 270C. I really don't understand how you did not melt it going at it from that angle.
Wen you point the heat to the sensor it will melt, use the heat on the back of the sensor like he does n it works 💯 %
Hi. Can you advice me possible fix for faceid in iPhone X ? I have 4 iPhones X
damaged
1.
PROXIMITY OK
CALL SPEAKER OK
ANIMOJI OK (FOLLOWS WHEN MOVING HEAD)
FACEID: OPENS SETUP SCREEN BUT STUCK ON PLACE YOUR FACE WITHIN THE FRAME ALERT
PORTRAIT MODE FRONT FACING CAMERA : FAIL ,NOT MAKING BLUR IN THE BACKGROUND
2.
PROXIMITY FAIL
CALL SPEAKER OK
ANIMOJI OK
FACEID OK
PORTRAIT OK
3.
PROXIMITY FAIL
CALL SPEAKER FAIL
ANIMOJI OK
FACEID IS NOT AVAIABLE ALERT
PORTRAIT MODE FAIL
4. FLEX WITH SENSORS CAUSING BOOTLOOP , THIS FLEX WAS TESTED WITH 3 OTHERS IP X MOTHERBOARDS AND SAME ISSUE RESULT BOOTLOOP
Can you fix move higher or move lower???
Great job 👍
good🙏
Great 👍
I’m confused, all other videos from Chinese repairers state it’s the dot projector that is paired,. They then use various tools that transfer data from dot projector flex to a new flex and Face ID works, however, you state it’s the proximity sensor that is paired. Plus, I personally just swapped out the whole front cable without any problems! Hope you can clarify. Thanks
They are all paired
Depending on what is damaged, you repair accordingly.
If ear flex cable is damaged then swap the flood illuminator.
If dot projector is damaged then its the dot projector need to be swapped
If flux gets in there its over, you are right about that.
yes i just almost killed it with IPA 😅😢
Are using a heat gun
👍🏾🖤
From what I’ve been learning, the move higher/lower is a problem with the dot projector and it is not fixable
That's not true. I just fixed 1 flex ripped out by a client of mine when he tried to change the screen by himself.
First i had this problem , move the iphone higher an lower caused by a short (my bad) between pins 15,16,17,18 and 5,7,9,11,13.
I've fixed the short and problem solved, now it's working perfectly
piulistu yeah well, if you see physical damage of course it will be fixable. I’m talking about the cases where there’s nothing obvious
@@smartfixAltea correct n I witnessed it too. Positioning the heat is vital. Understand the purpose of the heat n make sure deliver the heat carefully so it will will melt n come off. Experience is the key or it will burn the ic or sensor n not able to remove the component