PHONEFIX is a large Chinese store of tools and consumables for workshops and repair of mobile equipment. Soldering stations, programmer, heaters, separators and other tools on the official store page: www.diyfixtool.com/ A108 BOX Repair Programmer Link: www.diyfixtool.com/products/a108-box-multi-function-repair-programmer-for-iphone-8-14-pro-max Phonefix Giveaways: www.diyfixtool.com/collections/all?sort_by=price-ascending A108 BOX Repair Programmer (AliExpress): www.aliexpress.us/item/3256804992304669.html
@@VCCBoardRepairspls can help me,my ay a108 programmer is not showing/telling me to trust the computer instead it says allow and I can't do any face ID repair
I installed a new ear piece and face id doesn’t work. reason for replacing was I damaged my old ear piece whilst swapping it. any advice what to do please
thanks so much, I have been able to use it successfully ones. however, the other times, it shows green for all indicators on the AY A108 BOX, but fails on the phone
Thank you very much for sharing your knowledge. do you know if it is possible to activate the face id sensor after a change of motherboard? would i need the original face id? thanks!!
Good evening my Jesse thanks for your support, but I want to ask am I go to remove the dot projector tag flex after it’s work or I will keep it there??
Could you please explain every Face ID problem and the proper solution ? In this case you had the ic fuse, so it’s possible to fix it just with the flex. When we have ntc break, i2c break etc is it possible to fix it by changing flex ? Thanks in advance
hi i'm struggling with that. I have 2 questions : do you think the little flex addin can be used twice ? on 2 different front cam modules ? Second question : I have a module that is all green when plugged on the A108 without the addin. I perform the procedure well it seems but it doesn't solve the face id problem.
Thank you sir for sharing your knowledge great video i wish there will be more video in this format like repairing in mother boards ...etc . Again thank y ♥️
I have the ay as well and the tag on flex is a nightmare. Did my first one and can’t get the dot projector perfectly align properly because the tag on flex is in the way. 12 pro max flex is so long! Also do you know anywhere to buy these tags locally? Also, do you know anything about 13 and 14? I don’t see flexes for those. Thinking of buying ig or ms options….
Great content. As a tech starting out. limited cash. I'm looking for the least and easiest way to fix face id, true tone, genuine messages. what would you recommend?
Hi, great video! I have the exact same problem you had in the first place but can't seem to get the module aligned properly, and I'm sure the flex is seated properly in on the logic board. It worked in the first instance for a week or so then I dropped the phone and saw a different message in settings, so I opened it up and the flex had disconnected. message gone in settings now but same issue you initially had. Any advice greatly appreciated
First! Hope this will fix my iPhone X that I retired due to the Face ID no longer working. Had it sent off to have the dot projector replaced by a board repair service. They got it working but told me if it ever stopped working again it couldn’t be fixed.
I wanted to ask you, I bought a programmer, but during the firmware I accidentally disconnected the cord, now the programmer does not turn on, what can I do?
So i recently bought a used iphone 11 pro 64gb from a local off marketplace for $30, screen needed to be replaced (black screen) and it was supposedly stuck in recovery mode, however i was able to restore the phone which is unlocked with no activation lock, I replaced the screen successfully with a generic one off Amazon, to find out the face ID has a detected issue during setup. So I immediately thought the issue was the actual face ID sensors that mount to the back of display. In part I believe that sensor did need to be replaced as I noticed that the phone was getting hot when the face ID flex cable was connected, I disconnected that flex cable and the phone was no longer getting hot; I ordered a generic replacement face ID sensor assembly off Amazon last night and installed today to find out that the issue wasn't just that sensor for the back of display, but I believe the true depth camera you are dealing with in this video. Also I don't know if it matters but i never reassembled the phone as I don't want to have to lift the screen from the casing. How expensive of a fix you think it would be at a local repair shop?
It would depend. If you replaced the true depth camera or it's not original, then there's no way to repair Face ID Pricing would range between $100-200 i would suppose
@@VCCBoardRepairs I appreciate the response bro. Yeah I’m not sure whether it’s the genuine apple true depth sensor that’s in there or not.. the phone’s exterior appearance seems like it’s in great condition. But when I got around to disassembly I noticed one of the two screws on the bottom by speaker ports was missing.. I noticed some brackets and screws that were for securing the display’s flex cables into place as well as the battery flex cable cover plate were missing after opening it up.. luckily I was able to find a whole internal hardware set for the phone on Amazon for $5. But yeah is there a stamp/logo I can look for on the true depth camera sensor? I snapped the phone back together in the event the metal contact from the Face ID sensor on back of display needed to make with that of the True depth camera system’s metal bracket or something to get reenabled. No such luck tho 😞
Hi there! great review! Just bought myself an A108 and a new frontcamera+dot projector piece, canI write into it, or it has to be written into to tag-flex and then attach it to the original frontcamera+dot projector piece? Thanks in advance! A.
hi can you help me identify the problem -- What is the cause of the mistake ------> there are same copies in server cannot backup --- and -----> I2c break
Does the FaceID work if you put a tag on flex on a compatible front camera assembly replacement Or does the tag on flex work only on the original camera?
What I want to do is truetone but don,t have a genuine display I can't download the truetone file. I get a download 1.8 error. Please tell me why. I'm really in trouble. The system I'm using now is * AY108 * windows10/64bit computer *
@@VCCBoardRepairs oh thanks, by the way, do you have a tutorial of the battery percentage restore? I’m looking to replace the battery because my old battery is significantly downgraded (30%)
Tried the process but it did the same issue as what you had on the video where after I placed the tag on flex it shows "move higher or lower". Tried taking it out and double check it passed the test but still same issue. What resolution you did to fix that issue? Thanks
hello, my iphone 12 pro max i think got water into it, and now the truedepth is not working and my phone is very dim, cannot change brightness. will A108 and replacement piece fix it?
I’ve done all you have said Had all matching so far until you test the tag on flex once connected to the camera After test it’s days abnormal What am I doing wrong please
How can we tell if this is the issue with Face ID? On my iPhone 12, Face ID is disabled (as shown in the video) and when trying to take a Portrait Mode selfie, it keeps saying "Move farther away." Is this likely an issue with that part? Is it likely repairable through this method?
The burns remaining is just for that tag on not credits been doing these for a couple weeks now it’s a time saver for sure. Also could we get a tour of the new setup 👀
Haha yeah i figured that out after i recorded the video. Burns are for the tag on flexes :) And yes, once i"m fully all setup, i'll make a quick tour video
Hello, sorry I'm a french guy I don't understand everything. But if you have a jc v1se solution or equivalent do you prefer buy the JC solution in few weeks or do you buy this one now ? Thanks a lot.
I used ay108 to repair the face ID of iPhone x. Face ID has been activated. However, when I start setting up my Face ID, I can't set up my Face ID. Set it up later.A pop-up window appears. How should I solve it?
Hello. I saw a video of using jcid to replace earpiece to activate face ID and trutone. I bought a108 and a108 exclusive earpiece. I don't know how. I asked the seller and there's no answer. Please let me know if you know how.
I have a question with this, will it no longer be necessary to replace the circuit that goes in the DOT flex or is it always necessary in some cases? greetings from Guatemala
@VCC Board Repairs - Jesse Cruz do you know any other way to test the face i.d before opening it to tell if this will fix like portrait mode ect or using a second phone over the front camera to see if it flashes ??? also do you have any inside know when JC will release there version on this as im wondering should i buy this one for now or not many thanks love your work
Not sure how to properly test without opening the phone. As a repair technician, opening the phone and taking out the front camera assembly should be no problem for you. I dont know about the JC version. I heard it's already out but not sure
@@VCCBoardRepairs thanks for the quick reply yeah ive got the jc tool to test them just wanted the staff to be able to check easier ive seen the jc version in pictures but cant find it for sale many thanks again
okey i found the problem, this AYrepair software works only for me on windows 11, before i install it on windows 10 and it did not work complete ... now i have another problem : i did all the steps you show us till to test after connecting the flex cable together with the dot projector (glas) and it give me a error result with "luminescence abnormal" 😩
Can the AY A108 reprogram an iPhone 11 Pro flex cable sensor module(flood illuminator) or is it only limited to the true depth camera module. I am trying to restore Face ID
I have all the symptoms of a failed truedepth camera (portrait mode not working, no red flashing light, 'face-id unavailable') except for the error message, will it still work?
Please I need help after doing everything Face ID reading wan Normal but after I fix the phone back then the face I di started to say not available then I tasted again with the programmer then now am getting the A and B abnormal I don’t know if I damaged the flex in process please help me
When I look closer in the tag one flex I see a little dent or mark aground the middle I am thinking I broke the flex when I was assembling the flex now if I get another flex what will I do will I repeat the whole step again and if that A B abnormal occurs then I will have to do micro soldiering or the Face ID is done
PHONEFIX is a large Chinese store of tools and consumables for workshops and repair of mobile equipment. Soldering stations, programmer, heaters, separators and other tools on the official store page: www.diyfixtool.com/
A108 BOX Repair Programmer Link: www.diyfixtool.com/products/a108-box-multi-function-repair-programmer-for-iphone-8-14-pro-max
Phonefix Giveaways: www.diyfixtool.com/collections/all?sort_by=price-ascending
A108 BOX Repair Programmer (AliExpress): www.aliexpress.us/item/3256804992304669.html
Thank you for the video Jesse! Wonderful information that every repair shop should watch.
Thanks for watching!
I've been ignoring this side of things, time to take another look!
It's so easy. You should do start doing them.
1 more sub
@@VCCBoardRepairspls can help me,my ay a108 programmer is not showing/telling me to trust the computer instead it says allow and I can't do any face ID repair
Thanks for all your videos/info!!! Yes, a battery video on this would be awesome! Thanks again!!
Thank you!
I installed a new ear piece and face id doesn’t work. reason for replacing was I damaged my old ear piece whilst swapping it. any advice what to do please
Swap the ambiance light sensor
Is there any solution for iPad 11 Pro 2020?
thanks so much, I have been able to use it successfully ones.
however, the other times, it shows green for all indicators on the AY A108 BOX, but fails on the phone
Hi... is possible to read data from broken Face ID and copy data to a new Face ID..!? Thanks.
I’m definitely getting this tools now, it’s great and I love this price compare to v1se
awesome!
You always wins hearts❤️❤️ thanks for sharing🙏 but dear !! how to buy it.. ??
Thank you.
Links to buy are in the video description 😅
Thank you Jesse, for the review and why not do a battery tag as well ❤🙏
Soon! 🙌
hi, great video. appreciate it man. noticed the 9 tries(?), what happens when it runs out? need to pay or subscribe to anything?
Each cable has 10 tries
You only need 1 per cable/device
@@VCCBoardRepairs great info tq. i wanted to invest into this programmer since I'm getting more iphones for repair. tq again
Thank you very much for sharing your knowledge. do you know if it is possible to activate the face id sensor after a change of motherboard? would i need the original face id? thanks!!
Hi. Thank you for this video. I just saw this. Can i buy this program with this site in america?
I don't know who in USA sells it.
Maybe try contacting injured Gadgets for it
Www.injuredgadgets.com
Great review did it well , lets see if this thing can fix the battery issue .
Thank you! Appreciate the support!
you are my idol sir,i m jack from malaysia.nice to meet you in here sir
Thank you! Appreciate the support!
Can this method fix “face id not available, try setting up face id later” error?
Good evening my Jesse thanks for your support, but I want to ask am I go to remove the dot projector tag flex after it’s work or I will keep it there??
Keep it there
Activation not working
2:05 Non-wire detection, please remove the extension cord, or use a chip to repair it.
Please what can i do to fix it
Me pasa igual IP12 pro.
Could you please explain every Face ID problem and the proper solution ?
In this case you had the ic fuse, so it’s possible to fix it just with the flex.
When we have ntc break, i2c break etc is it possible to fix it by changing flex ?
Thanks in advance
Watch the other Face Id repair videos in my channel & you will learn more about the subject
I would love to see the battery repair and how it is done
I'll do it next time I get one of these repairs in
Thanks Jesse you're always helpful
Glad you think so!
Awesome and informative video, thank you Jesse!
Glad you liked it!
thanks mate as always easy to follow, thanks for uploading the video
Glad you enjoyed it
hi i'm struggling with that. I have 2 questions : do you think the little flex addin can be used twice ? on 2 different front cam modules ? Second question : I have a module that is all green when plugged on the A108 without the addin. I perform the procedure well it seems but it doesn't solve the face id problem.
It was said in the video that if everting is normal then maybe it board issues this only works if NTC AND I2C are normal
Did the site to download the software disappear? There's 404 error when you try to go to the aytool sites mentioned.
Thank you sir for sharing your knowledge great video i wish there will be more video in this format like repairing in mother boards ...etc . Again thank y ♥️
Sounds like you've never watched my channel :)
@@VCCBoardRepairs am a new subscriber and i can say 1 thing i like your contents nicely explained.keep it up i wish to see this channel grow up
I have the ay as well and the tag on flex is a nightmare. Did my first one and can’t get the dot projector perfectly align properly because the tag on flex is in the way. 12 pro max flex is so long!
Also do you know anywhere to buy these tags locally? Also, do you know anything about 13 and 14? I don’t see flexes for those. Thinking of buying ig or ms options….
Great content. As a tech starting out. limited cash. I'm looking for the least and easiest way to fix face id, true tone, genuine messages. what would you recommend?
im asking which programmer/ tool would you buy if you had to buy one tool.
I would say there's no 1 perfect tool. It's part of being a phone repair tech. Have to buy different tools for the different jobs.
Hi, great video! I have the exact same problem you had in the first place but can't seem to get the module aligned properly, and I'm sure the flex is seated properly in on the logic board. It worked in the first instance for a week or so then I dropped the phone and saw a different message in settings, so I opened it up and the flex had disconnected. message gone in settings now but same issue you initially had. Any advice greatly appreciated
try another tag on flex
do you have a method to write 100% battery health with device already updated to 17.4 or newer IOS
First! Hope this will fix my iPhone X that I retired due to the Face ID no longer working. Had it sent off to have the dot projector replaced by a board repair service. They got it working but told me if it ever stopped working again it couldn’t be fixed.
If the dot projector was modified previously, I don't think this solution will work
Hello Jesse with this tool you can program new Face ID or it needs the old one? Thanks for the vid
This requires the original true depth camera
Are this tool need change flex deeptrue camera sensor or just reprogamming the old was broken?
Only to fix the original
How to change this IC Data to ic fusing? I get different data name for that, what that means?
Not sure
I have a 13 pro in great condition but Face ID does not work and it’s not software related, I may try this out thanks for the video
This solution is not for 13 and newer
Please can you do a video on the Unkown part of changed batteries 🙏
Does this method help if the iphone is stuck in the "move lower/higher" face ID setup? Or just the "problem detected with TrueDepth camera" error?
Just true depth camera error
I wanted to ask you, I bought a programmer, but during the firmware I accidentally disconnected the cord, now the programmer does not turn on, what can I do?
That was a bad idea.
I'd recommend contacting AY directly or the seller of the programmer for support
@@VCCBoardRepairs ok Thanks
I have the assignment issue, 😢 try 3 phones , issue still there saying move up move down and move closer 😢
Alguna solución?
Update firware without data safe
So i recently bought a used iphone 11 pro 64gb from a local off marketplace for $30, screen needed to be replaced (black screen) and it was supposedly stuck in recovery mode, however i was able to restore the phone which is unlocked with no activation lock, I replaced the screen successfully with a generic one off Amazon, to find out the face ID has a detected issue during setup. So I immediately thought the issue was the actual face ID sensors that mount to the back of display. In part I believe that sensor did need to be replaced as I noticed that the phone was getting hot when the face ID flex cable was connected, I disconnected that flex cable and the phone was no longer getting hot; I ordered a generic replacement face ID sensor assembly off Amazon last night and installed today to find out that the issue wasn't just that sensor for the back of display, but I believe the true depth camera you are dealing with in this video. Also I don't know if it matters but i never reassembled the phone as I don't want to have to lift the screen from the casing. How expensive of a fix you think it would be at a local repair shop?
It would depend. If you replaced the true depth camera or it's not original, then there's no way to repair Face ID
Pricing would range between $100-200 i would suppose
@@VCCBoardRepairs I appreciate the response bro. Yeah I’m not sure whether it’s the genuine apple true depth sensor that’s in there or not.. the phone’s exterior appearance seems like it’s in great condition. But when I got around to disassembly I noticed one of the two screws on the bottom by speaker ports was missing.. I noticed some brackets and screws that were for securing the display’s flex cables into place as well as the battery flex cable cover plate were missing after opening it up.. luckily I was able to find a whole internal hardware set for the phone on Amazon for $5. But yeah is there a stamp/logo I can look for on the true depth camera sensor? I snapped the phone back together in the event the metal contact from the Face ID sensor on back of display needed to make with that of the True depth camera system’s metal bracket or something to get reenabled. No such luck tho 😞
Hi there! great review!
Just bought myself an A108 and a new frontcamera+dot projector piece, canI write into it, or it has to be written into to tag-flex and then attach it to the original frontcamera+dot projector piece?
Thanks in advance!
A.
No, you don't replace the dot projector
You add the tag on flex to the original parts
I recently changed my screen on my iPhone 12 pro max and I have this problem can you fix it and how much will cost?
Yes, I can help. Send me a message for a quote: www.vccboardrepairs.com/contact-us
Bonjour, si après ca l'iphone veux toujours pas activer face id ? le soucis viens d'ou ? merci
We have these devices and flexes too, How can I cooperate with you, we are a repair tool company from China
Bro great video. Could you do a video about how to restore True Tone?
I have one: th-cam.com/users/shortsOI7aHTbdmMU
@VCCBoardRepairs bro, thanks for the reply. Do you have one for ay a108 tool exactly or the process is basically the same?
Replaced the iPhone 11 screen and Face ID won’t work will this video be the solution to my issue?
Do the symptoms in my video match your symptoms?
hi can you help me identify the problem -- What is the cause of the mistake ------> there are same copies in server cannot backup --- and -----> I2c break
will the machine still work if the front camera was replaced previously???
This requires the original dot projector and IR cam. Otherwise it won't work
Does the FaceID work if you put a tag on flex on a compatible front camera assembly replacement Or does the tag on flex work only on the original camera?
It's only for the original Dot Projector (aka True Depth Camera)
It's not for the front camera at all
Can the tag on flex be removed after you got face id workinh or do i need to connect the TOF permanently?
It must remain permanently
I did face id repair but i don’t know how to fold flex for 12 Pro max can you plz tell me?
Can I just read my old dot matrix and write to a new dot matrix without a tag?
no
What I want to do is truetone but don,t have a genuine display
I can't download the truetone file. I get a download 1.8 error. Please tell me why. I'm really in trouble. The system I'm using now is
* AY108
* windows10/64bit computer
*
Thaank you sir
I bought the too,followed the steps and folded the flex as in the tutorial for the Iphone X. No Face ID Message but face ud Still not working.
Maybe ear speaker flex issue
hello, can it make another original apple face id dot projector to work on Iphone 12 mini ? (the original dot projector is destroyed WITHOUT backup)
No
D chip short how to backup d chip data with aY a108 tool , no have another tool
Hi guys I have error message “hv power abnormal” at 7:08 of the video. Can anyone help please? I have the reader plugged into mains socket
For anyone facing this issue I had to change the UK plug adaptor!
Ah interesting. Thanks for sharing the solution
Hey man, can you make a updated video for the 11 pro max, I don't have the original screen but let me know if this still works
You dont need the original screen.
@@VCCBoardRepairs oh thanks, by the way, do you have a tutorial of the battery percentage restore? I’m looking to replace the battery because my old battery is significantly downgraded (30%)
Yes on my channel search for bms swap
I love your multimeter holder, can you please leave a link where I can get it?
It's actually an iPad Mount that I zip tied my multimeter to: amzn.to/3Y2k0D7
@@VCCBoardRepairs thank you
what to do when you run out of burns /activations ?
Nothing. You get new ones on every tag on flex
Whoo! Thanks for this information!
Thank you!
Tried the process but it did the same issue as what you had on the video where after I placed the tag on flex it shows "move higher or lower". Tried taking it out and double check it passed the test but still same issue. What resolution you did to fix that issue? Thanks
Great question to ask in my group: www.vccboardrepairs.com/vcc-fb-group
@@VCCBoardRepairs thank you will join the group
Hi. I have the exact same issue. Did you find a fix?
Thanks
@@markaffleck4622 i just replaced the tag on flex, did the same procedure and it resolved the issue
Same issue here
hello, my iphone 12 pro max i think got water into it, and now the truedepth is not working and my phone is very dim, cannot change brightness. will A108 and replacement piece fix it?
Brightness issue is due to problem with ALS.
AY tool will not fix that
It will only fix the TrueDepth camera failure
you ara a hero in arabic أنت بطل
I’ve done all you have said
Had all matching so far until you test the tag on flex once connected to the camera
After test it’s days abnormal
What am I doing wrong please
Don't test. Just install and see if it works
How can we tell if this is the issue with Face ID? On my iPhone 12, Face ID is disabled (as shown in the video) and when trying to take a Portrait Mode selfie, it keeps saying "Move farther away." Is this likely an issue with that part? Is it likely repairable through this method?
If you get the same error I show in the begging about the true depth camera has failed, this method should work, assuming there are no other issues
The burns remaining is just for that tag on not credits been doing these for a couple weeks now it’s a time saver for sure. Also could we get a tour of the new setup 👀
Haha yeah i figured that out after i recorded the video. Burns are for the tag on flexes :)
And yes, once i"m fully all setup, i'll make a quick tour video
Hello, sorry I'm a french guy I don't understand everything. But if you have a jc v1se solution or equivalent do you prefer buy the JC solution in few weeks or do you buy this one now ? Thanks a lot.
This one seems to work fine. Up to you if you want to wait for JC. It's going to do the same thing
@@VCCBoardRepairs oh sorry! Today disponibility on Aliexpress! Yesterday don't. Thanks
Thanks so much for sharing sir
My pleasure
Can someone use A108 with out computer to restore true tone
Can the jcid v1se do the same with software upgrades? No soldering ?
You would need a new activation board for it.
I used ay108 to repair the face ID of iPhone x.
Face ID has been activated.
However, when I start setting up my Face ID, I can't set up my Face ID. Set it up later.A pop-up window appears.
How should I solve it?
You probably have non original parts then
@@VCCBoardRepairs I expected it, too.
I wanted to hear from an expert.
Thank you.
Hello. I saw a video of using jcid to replace earpiece to activate face ID and trutone. I bought a108 and a108 exclusive earpiece. I don't know how. I asked the seller and there's no answer. Please let me know if you know how.
I have a question with this, will it no longer be necessary to replace the circuit that goes in the DOT flex or is it always necessary in some cases?
greetings from Guatemala
I already solved my doubt at minute 5.52
awesome.
I am using this device but when i connect my phone with laptop but it is not detecting any thing
Is there a non-solder method for a damaged infrared sensor flex?
Nope
Hi is this possible with repairing iPad Pro 3 11” and do they supply tags ? Thanks
Sadly, no tag on flexes available for iPad Pros.
Thanks for your speedy reply!
I see a 13 pro battery flex but not Face ID? Do you have that
I do not
When I2C is disabled, how to activation? T.T
@VCC Board Repairs - Jesse Cruz
do you know any other way to test the face i.d before opening it to tell if this will fix like portrait mode ect or using a second phone over the front camera to see if it flashes ???
also do you have any inside know when JC will release there version on this as im wondering should i buy this one for now or not
many thanks
love your work
Not sure how to properly test without opening the phone. As a repair technician, opening the phone and taking out the front camera assembly should be no problem for you.
I dont know about the JC version. I heard it's already out but not sure
@@VCCBoardRepairs
thanks for the quick reply yeah ive got the jc tool to test them just wanted the staff to be able to check easier
ive seen the jc version in pictures but cant find it for sale
many thanks again
okey i found the problem, this AYrepair software works only for me on windows 11, before i install it on windows 10 and it did not work complete ... now i have another problem : i did all the steps you show us till to test after connecting the flex cable together with the dot projector (glas) and it give me a error result with "luminescence abnormal" 😩
Can the AY A108 reprogram an iPhone 11 Pro flex cable sensor module(flood illuminator) or is it only limited to the true depth camera module. I am trying to restore Face ID
Only true Depth Camera (dot Projector)
Message👆👆On Instagram. He can help you fix your device remotely
Did you ever find out about the activations remaining info?
Yes. It limits how many times you can activate based on the device. Every new device will give you new activations. You dont need to buy any credits
So do you need credits? How do you purchase and how much is it?
You don't need credits
gracias crack
De nada
is the flex gonna be in motherboard permanent?
Yes
have you had error while trying to activate? mine cant get to activate any flex
Make sure you have the external power cable plugged in
nice video but my computer windows 7 not install the software
Time to upgrade to windows 10
Hello Jesse, I follow all you steps but I am getting error "I2C break". is that normal or i am doing something wrong, please help
Make sure to update the software.
If you still get that, then the issue is something else within the dot projector
Does it work for the lightsensor ?
this video is about the truedepth camera repair only.
Support iphone 13 pro max ?
no
Please my ay108 programmer is in chinese Language
How can i change the language to English pls?
Check the settings.
I have all the symptoms of a failed truedepth camera (portrait mode not working, no red flashing light, 'face-id unavailable') except for the error message, will it still work?
That sounds like a different issue
@@VCCBoardRepairs any idea how to fix it then? I haven't been able to find someone else with the exact same prompts.
Please I need help after doing everything Face ID reading wan Normal but after I fix the phone back then the face I di started to say not available then I tasted again with the programmer then now am getting the A and B abnormal I don’t know if I damaged the flex in process please help me
When I look closer in the tag one flex I see a little dent or mark aground the middle I am thinking I broke the flex when I was assembling the flex now if I get another flex what will I do will I repeat the whole step again and if that A B abnormal occurs then I will have to do micro soldiering or the Face ID is done
Not sure what that could be.
Please sir
Help me with the tutorial of the installation of AY software.
I have downloaded it but is not working
Please help me sir
Great question to ask in my group: www.vccboardrepairs.com/vcc-fb-group
Can I program my FaceID from my old phone to my new Unlocked motherboard?
No
when i plugged in my iphone XS, AYrepair don't find the phone, whats could be wrong?
Make sure to have iTunes installed. Does 3u tools deteect the phone?
@@VCCBoardRepairs yes i have itunes on my computer and it works for me only with windows 11
mYy Iphone XS front camera replaced from other XS still can fix the Face ID?
Most likely no :(
does jc v1s pro can do this programming ?
Yes but you have to use JC flexes
@@VCCBoardRepairsDo you recommend this one or JC?