🔧iPhone X & 11 Pro Face ID repair (sensor replacement) - broken flex 4K 60fps📱
ฝัง
- เผยแพร่เมื่อ 28 ม.ค. 2020
- Fix Face ID by resoldering sensors to new flex 😊
0:42 Face ID is not working
1:12 Front sensors cable is broken
1:21 Both sensors are paired with CPU, so we will transplant it
2:03 New flex is prepared
2:34 Desoldering speaker
2:46 Preheater is set up to 240 *C
2:56 Desoldering sensors from old flex
4:21 Cleaning with solder wick
4:44 Tining pads
5:16 Cleaning second sensor
5:45 Tining pads
6:30 Cleaning flux
6:59 Applying flux on new flex
7:34 Soldering down Flood Illuminator
8:20 Soldering down Ambient Light Sensor
8:47 Flex is repaired
9:54 Face ID is working now
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
MUSIC:
Song: Jim Yosef - Link [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jim Yosef - Link | Hou...
Download/Stream: ncs.io/LinkYO - วิทยาศาสตร์และเทคโนโลยี
Thanks so much, really works for me!
More louder music please next time…… I am in love with that ears feeling.. …………
This video worth 1million likes and views 👍🏻
Thank you for sharing. I had broken my daughters IPXM flex when replacing the screen. I actually used a soldering iron to heat the back of old flex. It was tedious but with and extra hand, I was able to do this transfer of components to a new flex cable that I bought on eBay. Works great. Thanks again.
I just removed them with soldering iron at 400 degree Celsius and it took 1 second. Now I'm waiting for the new part to come in and swap it.
@@siedliko You used a regular or flat tip? Im trying to do this repair but i dont want to buy the heating plate. What youre saying is that it's possible?
@@stepanberan4641 heating plate is only 35$
Do you only have replace the 1 part or 2 parts from the original flex cable?
Good afternoon boss, I have this similar issue and I want to ask if I can replace the earpiece flex with followcome flex and transplant the two components from the old one to new one or the flex must be a new one?
Ciao mi sai diro dove trovare il flat nuovo senza i componenti che poi andranno saldato dall’originale ? Grazie
cześć, masz jakiś sposób na odklejanie wyświetlacza w Galaxy s6 i pochodnych?
problem jest taki że jak odklejam wyświetlacz to prawie zawsze odchodzi ta farba z kolorem szybki
Hello, one question, is it only necessary
to change the ALS or the flex with it? In
some tutorials I see that they change
the ALS with the small flex. Thank you
Do you also have a video about changing the screen and the error messages of the original parts?
What is the name of the machine your using to.solder it back on please
Oh omg god bless you brothers thanks for sharing
thank u for showing your skill bro
Can I know what type of vise u use and what it's name
Thank You.
Good job man
witaj, jaki jest koszt takiej naprawy face id?
If i cracked the display around the face id and it is some dust in,when i change it how do i clean that dust
Can you help me with this? And how much to fix this same issue of my?
Great Work
at 5:00 what tool is that to hold the board?
change flexible working faceid ?
posso farti una domanda a che temperatura imposti il saldatore grazie. comunque sei bravo
So, I am new to your page and have a question to ask Jerry Mobile. After replacing the flood illuminator and sensor from the old broken flex cable to a new one, I thought you'd need to copy data on the old flex cable to a new one. I know your video says a lot about my question, but I want to know. I'd await your reply...
bonjoiur c est quoi le nom de la platine de chauf xvp merci $
I have an iPhone 8 in my hands to which they cut the flat cable that connects the motherboard with the front camera and the various sensors. I have unsoldered the proximity sensor and the ALS ambient light sensor from the old flat. By buying a new flat and using the old sensors (only the ALS should suffice), is there the possibility that True Tone will be recognized again?
The front camera is not related with True Tone, to recover True Tone you need to copy the MtSN from the old screen to the new one, you will tool called iCopy.
Juan Carlos Escobar yes but you also need the original ambiant light sensor. So yeah if your screen is original doing it that way will keep your true tone. But its not worth all the work I think. Fuck true tone
Also the liquid materials u used please
Good Job
Does this work on iPhone 11? My ear speaker doesn’t work, slight tear in the flex which I’m assuming is the problem, want to be able to use Face ID with a new ear speaker, is that possible?
You will have to transplant the flood illuminator and the scanner as in the video. If you do that, it's gonna be functional.
do u fix things from overseas
Great job super
Thanks bro...i done it
is that possible to replace both of sensor to aftermarket flex? not the original flex?
Face id won't work with aftermarket
Lokasi dimana om? Punya saya 12PM fleksibel sobek kena brapa ya? bisa dipaket?
Siema, czy trzeba obydwa wymienić sensory?
Wymieniłem tylko ten kwadratowy, I nie dziala.
trzeba oba
good job..
Thank you so much repaired mine face id but auto brightness option gone although light sensor working perfectly
How can you tell the light sensor is working if auto brightness option is gone? And did you ever fix this?
After i update to iOS 14.3 my iphone x face id doesnt work... portrait mode doesnt work too And 2x zoom camera doesnt work too, What do you think îs the problem?
We take the all Face ID system of a dead iPhone and put it on the other phone whether it will work or not ??
Hi, I have this question. My ambient light sensor is broken, can I change this sensor only on the flex or it programmed with flood illuminator?
Hi. You can't becouse all the sensors are connected with a CPU. 1 by 1
@@JerryMobilePL hi are you sure?even the front camera?
@@andreaorlando8476 yes
Thanx bro
Hi! Thanks for a great video. I am going to try this repair. I have bought a new flex cable but all I have is hot air work station. One other video shows the use of a hot air workstation at 260 degrees and 40 air flow. Do you think has problems? Is it really required replace the flood illuminator AND the chip next to it? I have subscribed!
What are your findings?
No Panowie ile taka naprawa? Pacjent X ciagle restarty(zbity ekran mocno) aż zmieniłem taśmę z głośnikiem na chińczyka ale faceid nie działa.
Hello can i take different face id and motherboard and connect like this ?
Face ID comes with original motherboard. As long as the Face ID you’re using matches the original motherboard, it’ll work
Hey man can you fix a iPhone XS Max back glass and front glass for me and unlock it? I bought one a while back on eBay I have the paper that shows proof of purchase but I got screwed and it’s locked but I want to fix it please reply
All I can, but if You think about iCloud- it's impossible if You don't know AppleID password
Love you back to the moon for this.
My iPhone X the sensor to the far right of the notch isn’t working. But I don’t get any error messages in my FaceTime. It just doesn’t grab my face to work. It just keeps telling me to move the iPhone up or down. Any help?
you got it fixed ?
Zor gap yoq
I did the same thing but the rectangular piece melt a bit from the heat exposure from reballing the sensor piece. Now Face ID still doesn’t work. What should I do?
Had a similar exp my friend, and i can tell u what you can do.....nothing
Face ID sensor have nothing to do with earpiece assembly. Face ID module (known as “dot projector”) is a part of front camera module (situated in the phone frame itself) and not earpiece assembly. It does often malfunction due to camera module ribbon connector damage but yet again, nothing to do with “earpiece assembly”. This certainly won’t fix “Face ID” malfunction. Other issues, yes, such as proximity sensor issues, but not face ID issues.
@@piotrskorupski2617 u are tying too hard to look smart, but let me tell you your bullish talking and my experience contradict themselves. Earpiece flat assembly if damaged face id wont work due to proximity and light sensor being on that flat and unfortunately face id needs those things to function properly, meaning even that is crypted to the board if not recognized properly face id wont be working, happened to me on iphone 11 pro, iphone xr, iphone 11 and many others, usually being the light or the proxi sensor malfunction due to minor fluid damage or the flat itself being fused so please spare me your jabber
What will b cost of iphone x face id
W jakim temeperaturaxh było to robione?
260-270 dla hot aira
when you change flex and components do you need a programmer? or just swap and it works?
If we make a swap, programmer isn't needed 😉
@@JerryMobilePL because I broke the flex, Face ID works but speaker does not work, if I buy new flex cable and swap how did you do it will work? thanks master
No since he changed the ic the program is already written on the ic
Nice video,i have the same problem,My face id camera is disabled.I have to fix it but,how much does it cost?🙏🏻
I have an iphone xs max with working face id but sensor is broken .. can i replace the sensor only or what i can do sir .. thank you
If You have a broken sensor, You have to go to Apple store.
Flex is universal, but sensors are paired with CPU. There are no different way :/
Serh gut
kedai di mana?
Temperature?
Is it possible for you to replace my broken Face ID cable to a new one if so how much
Yes I can do.
i have an iphone X whenever i try to setup face id it shows to move iphone lower or higher i have tried to reset it and force rstart but it doesnt work can my iphone be fixed
Need to reposition the camera assembly when attaching the screen.
This is need og cable or copy cable ?
Use orignal flex cable ….
No Brasil nao sei se alguém faz isso pois temos trocares de peça kkk em iPhone estragou poem outro kkk e assim infelizmente não entendo!!!!
@@alvarozehzinho2968 bom saber amigo passa zap ...
If you break proximity sensor is there no chance for face id?
wow ! impressive work. would you mind sharing the temperature you heat up the plate to solder the ID ?
You can remove it with hotair gun more fast, temperature 250 air 30, if you use with heat plate form then 200 temperature but it will take time because no air ,
Wow.That's great.You're so talented.I enjoyed watching your video.
Does this works on 12 pro max ?
Cześć, czy nowa taśma musi być originalna Np z innego tel i przeszczep elementów ?? Czy może być zamiennik za pare zł i przeszczep ?? :)
Dziękuje :)
Taśma i głośnik mogą być zamienniki ale flood sensor i proximity muszą być oryginalne, są przypisane do telefonu
will this fix face id?
thanks dude.. need to change 2 component, its works for xs max..
Yes it works the same :)
good👍
I did the service perfectly, everything worked ok but after a while it started to restart the device without stopping when removing flex came back to turn on any normal tips? Could it be?
Fiz serviço perfeitamente funcionou tudo ok porém com tempo começou a reinicia o aparelho sem para ao remover flex voltava ligar alguma dica normal? Será que seja?
you mightve damaged the flex while replacing. Try resoldering both of the sensors. There might be a wrong contact and the phone gets stuck in a boot loop.
@@stepanberan4641 I managed to fix it was for correct positioning at the time of soldering after booing. try worked and not restart but never ..
Mere iPhone X me face I'd band h to kitne me ban jayegi or Kaha se ho ap
Boss what’s the name of that chip holder
You can find it in description ;)
How much would a repair like this cost?
Can u send me a lin to buy the Cu heating plate to my solder station?
I added im description, please check 😉
@@JerryMobilePL not working...
@@benece2004 Working perfectly
Good pm idol ask ko lang nahulog kasi ung phone ko sa pool at nagmadali agad ako magpunta sa tech dito malapit samin para idry yung loob binaklas nya lahat and dinry ung loob then ayaw na bumukas ng lcd ko nag order sya agad nung GX na lcd at nakabit na tapos binalik ung truetone kaso may important message at nawala face id sabi nila mababalik pa face id kaso wla daw sila gamit dun daw un sa flex my chance papo ba mabalik ung face id ng iphone 11 pro max ko? Ty sana mapansin ako idol
Sir I need your help my xs max fill in water and the Face ID is damaged can it be fixed?
Issue with dot matrix
If this flex cable broken, true tone will effect?
Yes, true tone works only with this module
Price ??
mere me phone suddenly face id kaam krna band ho gya aur phone abhi bhi warranty me h . what can i do?
Bro sensor buying link
Good but please makesure to add music that is not much loud
O kurde nie spodziewałem się że to od Polaka znajdę poradnik do wymiany faceID. Zazwyczaj problemem jest taśma czy jak znajomy mi powie "nie działa mi faceID, to problemem może być też coś czego nie naprawie?
Przyczyn może być wiele. Po zalaniu prswie zawsze siada face id, korozja przy czujnikach i wpinka do wymiany. Pęknięte ścieżki między płytami po upadku (płyta jest 2 piętrowa). Przyczyn jest wiele, ale zerwana taśma to najczęstszy przypadek 😁
Prolem moze stanowic tasma, nawet czesto tak sie dzieje, ale to nie chodzi o tasme z od samego modulu "sluchawki", ta akurat nie ma nic wspolnego z "face ID".Doslownie pol godziny temu skonczyem naprawe niedzialajacego face ID w Iphone 11. Problemem okazal sie caly modul przedniej kamery (na którym miesci sie rowniez sam "dot rojection module" - inaczej zwany face ID sensor) który calkowicie "wyskoczyl" z uchwytow mocujacym, po tym jak telefon praktycznie odbil sie od podogi - celowo rzucony w nerwach o glebe :D:D Wysypa sie ekran (czrne linie etc) no i z nerwow znajomy przywital tel z podlogá :D Dwie godziny roboty, wymieniony ekran, modul kamery i face ID wróci na miejsce i wszystk smiga jak trzeba :D
Quanto costa fare questo lavoro se puoi farlo al mio
Czy taśmę trzeba programować ?
Nie trzeba, wystarczy przelutować sensory 😁
A słuchaj, czy musi być to taśma programowalna czy wystarczy jakakolwiek inna tylko sprawna ? Bo kupiłem nowa na Allegro przylutowałem te dwa czujniki programator pokazuje norma a dalej nie działa. Zostały te same numeru sesyjne co w nowej pomimo wlutowania stratach czujnik poprawnie.
If my face e-district breaks down, just do it like this
🔥❤️
I did this but the phone constantly restarts, what's the issue? After removing the flood illuminator it doesn't restart, is it because of bad soldering?
Hi, have you resolved this issue?
@@clarksterkent I replaced the whole flex cable, probably due to bad soldering.
@@phonerez9892 then you transplant the flood illuminator and the ambient light sensor again? does it work now?
Was this flex new or a pre used Apple one?
It was pre used, but You can shop new (not original)
Jerry Mobile I’ve seen non original flex’s have a small chip missing on the back of ear speaker? Also the joint near the ambient light sensor is slightly different also which is a shame as you could swap just the damaged ambient sensors part of the flex! I’m going to try and solder mask the ambient sensor today and retain the original flex. Any ideas What the small chip is I don’t have any schematics.
Hi man . Can u repair my sensor flex ? Plz tell me price and I’ll send my sensor flex through courier
Why not of course we can. Please message us on Facebook :D
@@JerryMobilePL hi sir same face I'd flex is broken
Czujniki musza byc oryginalne ?
Muszą być te same, są sparowane z procesorem
@@JerryMobilePL czyli nie mając oryginału z dokladnie tego telefonu nic się nie zrobi bez serwisu Apple :) dzięki za info.
@@Dragonito12 zgadza się. Można tylko przeszczepić czujniki na inną taśmę tak jak na filmie 😉
@@JerryMobilePL ale czy ta nowa taśma musi być oryginalna czy wystarczy zamiennik ?
The floodlight emitter turns yellow, I don't think the face id worked after you replaced the flex. the more you give heat, it will burn the sensors. always try to give less heat as possible.
when you change flex and components do you need a programmer? or just swap and it works?
@@caffa_tech just swap the components with the lowest heat possible, preferably a heating machine and you don't need no programing.
ok thanks for the reply, i was thinking of using a pre-heater at 250 degrees
It will work flood illuminator turns yello when you put liquid on it it will still work if you replace it properly don’t worry about its yelloishness
@@punjabwireless9565 are you sure brother
How much would you charge for this
About 100$
M_tool1 on iñstagràm did,mine $50
Will it work in iOS 15.1
iOS doesn't matter about this repair 😉
I love You
Me too
Me too
He is not interested in you. He is engaged with someone else
Fix my Face ID menu?
Does this person have any email where can contact him?
Geek squad said my X need new earpieces speaker , but they would have to change out screen as well i said nah. took it to a boot leg place changed out earpiece speaker and same issue sounds real low smh.
how much usd would you charge me for this repair.. I have XS.
100$ 😁
How much for Face ID repair
120$
Can I contact you?
Please message on Facebook :)
@@JerryMobilePL i do it but face id not working. Is it posible that i have brought a cheap flex cable
Helal olsun bizimkiler de telefoncuyum diye geçiniyor