I have the 1000lb spring and it doesn't fit without a spacer and a longer bolt which when I find will post here where I got it. Because the spring is too thick it rubs on the bracket and doesn't fit properly.
How did you install the coil spring shock? With the stock one, i have to compress the shock so that i can insert the binding tube. Also do you have a link for the shock you used? Thanks
no, for the stock one ,you have to release the air in the shock so it becomes shorter. if you buy a DNM oil shock ,you have to turn the spring adjustment ring to make sure the spring is not comressed, after installation, use a screw driver and a hammer to turn the ring then to tighten the spring
@@speedyjack6921 oh ok. I pressed the valve to release air till it stopped releasing and it was still tough to compress. Ill try again. For the coil seems like u cant access the ring to adjust the spring once its installed no?
Great video, thanks for sharing. What is your weight and what’s the pedal height with you standing on the wheel. You said it’s lower now, is that because of more sag or less travel?
hi ,it's because by changed to Oil shock , I don't need to pump the air shock very high pressure to avoid bottom-out. so the pedal is lower, around 2-3cm lower than original, but still very high from the ground. travel range remains the same
@@speedyjack6921 thanks for your reply. I will be using my Master and S22 when they arrive for off road MTB track riding, do you recommend this DNM 190mm Shock for off road riding.
@@scottmorris7320 the MASTER, due to the design of shock system ,is not good enough to jump down from more than 30cm, other conditions than that should be fine.
i suggest to take both, they are both great wheels, my suggestion is change Master's knobby tire to on-road type, make it a racing EUC type , and keep S22 as a perfect offroad EUC. Master requires more DIY job to make it perfect but it has a lot more torque than S22. S22 requires little DIY work to be perfect, but less torque
@@speedyjack6921 thank you for your response.. I really hope the next gen s22 gets more range and power.... also I want to see what inmotion does with v13 before I put the nail in the coffin.
Beautiful red and black setup
no no, it's not ugly! It looks way better than the factory one!
Ok u got me I orderd it and waiting in the mail for it. Thank you for info.
👍 just got mine - cheers
Keep those longer videos coming : )
Thank you very much. Where do I purchase these upgrades?
I have a Master and a question. What is that strap on top of the wheel and where can I get one? 😄
Can you please link to the shock you got? I don't wanna get the wrong one
I have the 1000lb spring and it doesn't fit without a spacer and a longer bolt which when I find will post here where I got it. Because the spring is too thick it rubs on the bracket and doesn't fit properly.
Just subscribed buddy, good channel 👍
thank you ,buddy
❤
Hi SpeedyJack. Thanks for the video. Do you have the li k for the 3d printed stand and the DNM shock please?
Also interested
How did you install the coil spring shock? With the stock one, i have to compress the shock so that i can insert the binding tube. Also do you have a link for the shock you used? Thanks
no, for the stock one ,you have to release the air in the shock so it becomes shorter. if you buy a DNM oil shock ,you have to turn the spring adjustment ring to make sure the spring is not comressed, after installation, use a screw driver and a hammer to turn the ring then to tighten the spring
@@speedyjack6921 oh ok. I pressed the valve to release air till it stopped releasing and it was still tough to compress. Ill try again. For the coil seems like u cant access the ring to adjust the spring once its installed no?
@@Ronin_Ryder I can, by using a slotted screwdriver and a hammer, I can reach the spring adjust ring and turn it a few rounds
How did you moved the battery? Adding spacers?
Wow ya that City Grip 2 looks like a tight fit on the rim and between the batteries. How do you like the ride?
really nice mods ! Can i put a DNM shock 165mm on the master ( to have lower pedals ) ? i just ride on road.. Thanks !
How did you mount the Bluetooth speaker so it remains secure on the wheel?
Great video, thanks for sharing. What is your weight and what’s the pedal height with you standing on the wheel. You said it’s lower now, is that because of more sag or less travel?
hi ,it's because by changed to Oil shock , I don't need to pump the air shock very high pressure to avoid bottom-out. so the pedal is lower, around 2-3cm lower than original, but still very high from the ground. travel range remains the same
@@speedyjack6921 thanks for your reply. I will be using my Master and S22 when they arrive for off road MTB track riding, do you recommend this DNM 190mm Shock for off road riding.
@@scottmorris7320 the MASTER, due to the design of shock system ,is not good enough to jump down from more than 30cm, other conditions than that should be fine.
@@speedyjack6921 ok thanks.
Thanks for sharing! What psi did you set your dnm pump to?
It is an oil and spring shock, so you.dont need to pump it, i use 1000pound spring and 900 pound one is also fine
@@speedyjack6921 what weight are you speedyjack? Just to get an idea of the spring loading I should go for.
@@speedyjack6921 1000lbs?? if you don't mind can you tell what your weight is?
Hi Speedyjack, thanks for the video but which dimensions for the Michelin City Grip 2 you used?
It.is 90/90-14
You move a battery pack because of 90/90 tire right? Do you think 80/90 tire will fit perfectly without modification?
@@doubleSGtrouble 80/90-14will fit too, but i think michelin does not have that model. And 90/90-14 does look wide and cool
S22 or Begode master? I am almost at a coin flip lol.. great content keep it up
i suggest to take both, they are both great wheels, my suggestion is change Master's knobby tire to on-road type, make it a racing EUC type , and keep S22 as a perfect offroad EUC. Master requires more DIY job to make it perfect but it has a lot more torque than S22. S22 requires little DIY work to be perfect, but less torque
@@speedyjack6921 thank you for your response.. I really hope the next gen s22 gets more range and power.... also I want to see what inmotion does with v13 before I put the nail in the coffin.
@@johnniesohn2272 sure, that's a good idea, so far I ride Master everyday like a motorcycle, playing cornering is a great fun
Where do you get the EVA foam
DNM 190mm IS 750 lbs?
you can get the 1500 lbs if possible
Hi. Could you tell me what is the size of your new tire?
90/90-14
sauf erreur de ma part votre pneu est posé à l'envers
Damn, too heavy for me
Which shock is it
Dnm 1000 pound oil shock
@@speedyjack6921 Hi Jack, which DNM shock did you install? DV-22AR right? Only 900 and 1300 lbs, can't find the 1000 lbs one
@@RodaListrikEUC the 1000lbs spring is from another shock ,just take the 900lbs one ,that 's stiff enough
@@speedyjack6921 why not the 1300 lb shock for 60/40 off-road/road ???
@@keithmurakata5359 its all depends on your weight. The same pain to choose right spring for scooter
Hi, what material was used for the 3D printed stand please ?
Soft material like TPU or more like PLA/ABS ?
PLA
@@speedyjack6921 looks great, don't you have any wearing issue after a certain time ?
@@The4lexO it's warm in summer ,PLA may get fragile when temperature is low, so I can tell till winter :p