Anet ET5X: How To Level The Bed And How To Do First Printing

Anet ET5X: How To Level The Bed And How To Do First Printing
I bought this printer almost one months ago and I never managed to level the hot bed or other way round - prevent the extruder nozzle from hitting hard the hot bed. I've been watching many videos and all the instructions, but it didn't help, but finally today it worked - so this is how I did it. Watch and see!
Get more information about this printer directly on Amazon with this link: amzn.to/3kY5BoR
Disclosure: some of the links provided might include affiliate links and if you use them, it will show your appreciation to my channel and my work and pays for my equipment and help my channel grow - which will again help you. There is absolutely NO disadvantage for you and you will pay absolutely same price as without this link. Thank you for supporting my channel!
Disclaimer: The information provided on this video is for general purposes only based on my personal experience and are my very personal opinion, trying to help other people and should not be considered as professional advice in any kind. I am not a licensed professional so make sure to consult with your professional consultant in case you need to. All the links I provide in my videos, the description or in my feedback I provide in an effort to help you as good as I can, but I cannot give any warranty on them and hence you are using them on your own risk as I use them on my own risk.
~-~~-~~~-~~-~
This is my NEW storefront on Amazon where you can find all my recommended FAVORITE products:
www.amazon.com/shop/allchecko...
Thanks for supporting my channel to keep it alive!
~-~~-~~~-~~-~

[@skampp]

Thanks very much for this video! I bought this printer (unfortunately) and have been struggling with it off and on for over a year now. This seems to have done the trick. About the only thing I think I'll use this printer for is for the larger nozzle prints. Right now I have a 0.8mm nozzle on it printing at 0.5mm layer height for things that don't really matter, but are very large. You've helped me regain a lot of print time. Thanks again!

[@allcheckout]

Glad to know, that I was able to help - thanks for the positive feedback! 💖
BTW I also regret buying this one. It looks so promising but the leveling is really bad and the leveling problems always come back :-(((

[@scottboutilier8728]

I had the same problems when I first tried my new machine. I was thinking that I would send it back. I tried for a week to get it to work correctly. I watched your video and it works very well. Thank you for your video it really helped a lot.

[@allcheckout]

Yes - same here. Glad to know, that I was able to help - thanks for the positive feedback! 💖

[@tjones3825]

Hello Brother. I am ordering this printer through Amazon. Could you do more videos to give pointers on setting it up to avoid problems. Also how is the printing going now?

[@allcheckout]

Sorry I haven't been printing much. Still a noob, but happy that I managed to finish leveling the hot bed ...

[@schawn4925]

I have my printer for months now and I can print with it but when I do manual level one it goes to only one spot but when I push 1234 button it doesn’t do anything,the buttons reacted to my touch but the machine does not move to the corners. any idea what it could be?

[@allcheckout]

Wow - crazy. This printer is really difficult to operate sometimes. I regret that I sold my old Tenlog and kept this one. I've had so many problems with it - especially regarding leveling and sorry ... no real specific solution for that. Did you also try automatic leveling?

[@schawn4925]

@@allcheckout when it does it it goes to one spot only. Same thing with manual. I’ve done some decent prints but kinda Think the printer would be just a little bit better if I can calibrate it at all four corners. Anet has no customer support really I emailed them but no feedback,

[@allcheckout]

@@schawn4925 Yes - support is terrible. I will never buy again an ANET. They sent me the link to an unmanaged forum and they promised me to send me a replacement sensor, but they never did. Horrible company. Have you tried a FW update?

[@jkjilali]

Press button twice