Deburring tool for cleaning 3D printed parts
ฝัง
- เผยแพร่เมื่อ 1 พ.ค. 2024
- In several videos, when I was cleaning the brim with my knife, I got suggestion to use deburring tool. So, this video is about testing a deburring tool, is it really more comfortable for removing the brim, elephant foot or sacrifice layer.
The tool I used:
www.banggood.com/custlink/Kvv...
Additional summary from comments:
(will be here after 1 months)
If you like my work, you could support me:
www.mytechfun.com/donation
Contents:
0:00 about deburring tool
1:30 unboxing
2:04 removing brim using knife
3:36 removing brim using deburring tool
5:00 testing with metal
6:53 removing supports
8:11 conclusions
#deburringtool #3dprinting - วิทยาศาสตร์และเทคโนโลยี
![ถ้าเธอไม่รักทำไมไม่บอกฉัน - PAPER [ Musicvideo ]](http://i.ytimg.com/vi/pfeBhDda7m4/mqdefault.jpg)
As a sheetmetal worker we were taught to be very careful not to deburr towards your hands as it is capable of cutting tendons if the tool jumps from a snag.
Good to know, thanks.
as an ironworker I was taught over and over - NEVER aim the deburring tool towards your jugular. It can jump out and go straight for your throat.
This only really works in one direction.....Towards yourself.
I used one of that kind of deburring tool for decades when manufacturing aviation sheetmetal structural parts. I'm retired from the aviation industry now. When looking back, I see a lot of tools I used in aviation that can be directly transferred over to 3D printing. I pulled out my 12 inch steel rule graduated in hundreds on one side and fractions on the other yesterday to take measurements because I needed them for the part I was designing. That steel rule has touched literally 1000s of aircraft parts. Now it has been brought back to life.
This is the coolest hobby ever. My own little computer-aided manufacturing plant. Now I can get busy and start building that time machine I always wanted.
Hello Igor, I have been following for a while, this is the first time I think I can teach something instead of be taught: supports are easily removed by hand with the same surface quality, utilizing slicer settings. Depending on filament, I would suggest increasing vertical distance, fan%, and lowering flow.
Of course, this tool is great for brims.
I use a deburring tool for my 3D prints, angle it at 45 degrees and clean away. I find it works better on internal cleanup, for external I hold the cutter with my fingers to prevent it from spinning, makes cleaning the outside of round shapes etc much easier.
Yes! One of my favorite tools. This is a must have IMHO.
Apart from my Hungarian comment, here is one for the masses. We use these tools at work and they are extremely handy for cleaning 3d printed tools, cleaning cut plastic sheets (the ones that go into Bosch profiles for example) and a lot of other custom made parts. We have assembly lines for tables that are used to assemble wiring harnesses. These tables have all kinds of plastic sheets, metal brackets and what not. We use the deburring tool on these too, to save the wiring harnesses from damages. They are really handy and I've been wanting to get one for aged, but never saw them available locally.
I've been thinking of buying one of those for ages, and your link made it easy!
This is a brilliant tool for general deburring commonly used in engineering and one I use all the time. Worth looking at tools designed for model making like the Revell Precision Scraper Tool. Love the channel ang nice to see you review a range of things for the 3D printer enthusiast.
I use both the deburring tool and a knife.
I think you got it right, they each have their strengths and neither is good in all situations.
I love using the deburring tool on "inside curves" (like a hole) where the part kind of guides the tool. On "outside curve" (like the perimeter), it doesn't work so well in my opinion. For this, I tend to use the knife but I orientate the edge away from the motion to avoid digging in the part (I scrape, I don't cut)
Been wondering about these, looks like it time to get one. Its the little things in life 😃
Same here. I just ordered one from Banggood using the link in the description.
A deburring tool was one of my best investments. Although less used, a wood burner/old soldering iron also comes in handy
Thanks for the very helpful video!
I mostly use the Deburing tool
Thanks for sharing your experiences with all of us :-)
Thanks for demonstrating how to use the tool, I just bought one but didn’t know quite how to use it.
I also have the deburring tool and in some cases it is useful but every now and again I have to get the craft knife out for areas where I cant get with the deburring tool, on the whole it is a very useful tool
The problem with these tools is, that if you get stuck during cleaning and you continue then abruptly, you can get more material out of the part as it happens on your try. Only if you do it in one continuous try, without stucking and always with the same pressure, then you get nice, clean and even results.
Exactly! For plastic light and steady pressure.
great to use on holes but I prefer to use a #11 xacto blade for my cleanups. blade is sharp for small details and inside corners, and I use the back edge as a scraper for bulk clean up. cabinet scrapers or card scrapers work well also.
I always enjoy watching your videos, in this one you make a simple deburring tool become interesting. I use the same style of deburring tool (but with a metal body) and find it very useful, the best feature is, as you point out, that it finds the correct angle. I also use a pocket knife for some jobs, the knife blade is made of a material (CPM S110V) of typical hardness 58/61 HRC and so can be used for softer metals, but it can dig into materials unlike the deburring tool. Vote deburring tool +1
Just out of interest, we have fairly strict knife public carry laws in the UK, no assisted opening mechanisms and no locking mechanisms, blade 3" or less, etc.
I bought a de-burring tool for my 3D prints, and found it tended to dig in and gouge the edge, like you did at 3:52. So I went back to using a hobby knife.
Dear Igor thanks for your video. Hand countersink is also "must have" tool in 3d print debugging box for the same purpose, IMHO.
I use the deburring tool. It's amazing
I use the deburring tool a lot but it does need a little practise to angle the handle correctly else it judders, also a set of small files is very handy. Knife causes too much damage because I get lazy and rush things. Nice demo of how not to use a knife at one stage there, I had a good chuckle because it happens so easily. I also tried a potato peeler, it doesn’t work very well for plastics, digs in too much
I guess I just discovered a new tool 🤣 definitely need one
A brim eltávolításárav használom, vagy élek utómunkájához. A támasztékot egy erős csipesszel szoktam leszedni, lekaparni. A stringing eltűntetéséhez forrólevegős forrasztóállomást, kefét és sniccert használok.
I find its great for straight edges. Unfortunately less helpful on external rounded corners. similar conclusion to you. but was hoping it would be good for round corners.
By using a one-color cutting surface (without strongly contrasting lines) you will probably have less issue with the auto-focus of the camera being on the cutting surface instead of your hands/object.
Yes and recommend
Absolutely fantastic for an interior radius like the inside diameter of a PVC pipe. It's horrible for the outside radius of that same pipe. Would work OK if the blade could be locked so it doesn't spin. Comments here confirmed that I'm not using it wrong; it's just that it's very good at some things and not good at others.
------
ich verstehe zwar kein wort, aber den entgrater nutze ich auch schon seid 4 jahren für meine drucke. hatte das teil noch liegen zuhause, weil ich maschienenschlosser bin. und der entgrater ja eigendlich aus dem metallbereich kommt und für 3d druck nur zweckentfremdet wird. :-) aber klappt gut.
i may try and deburr the poop around my buhhole with this! thanks!
I have a good experians whit the deburring tool
For me the deburring tool doesn't replace a knife, but just adds another option when cleaning parts.
knife works just fine until yous missing parts of fingers so debur tool is nice.
How well it works deburring tpu?
On the edge fine (I just tried 95A TPU, I don't have softer currently for testing)
Gonosz módon magyarul írok - hol lehet boltba venni ilyet / mi a magyar neve? Eddig sehol nem láttam árulni :D
Kézi sorjázó, most lesz Lidl-ben akciós. www.lidl.hu/p/barkacs-ajanlataink/barkacseszkoezoek/p118730
@@MyTechFun cool! A lidlben már sok jó cuccot vettem :D Köszönöm az infot!
no point, sand papers or a file work better for soft materials especially 3d parts
Too sharp for plastics and not precise enough.
Personal experience or just opinion?
@@MyTechFun It’s perfect for steel. You can trim an edge from start to finish in one go. And it needs some speed to work. So, long edges get a cleaner trim. Soft metals and plastics on the other hand get carved if you aren’t careful enough. That’s my experience anyway.
Try to do away from himself. More easy to stay stable.