My Favorite AIRBRUSH ACCESSORY: The Universal Airbrush Holder

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 พ.ย. 2024

ความคิดเห็น • 32

  • @victoriadelacroix8570
    @victoriadelacroix8570 หลายเดือนก่อน

    I've learned a lot from you. It's kept me off the beaten path. Sincere thanks.

    • @theartworkshop
      @theartworkshop  หลายเดือนก่อน

      Glad to hear it- thank you!

  • @vonovine
    @vonovine 2 หลายเดือนก่อน

    It is just the BEST!..
    Thanks for the recommendation👍

  • @thanhquannguyen9624
    @thanhquannguyen9624 หลายเดือนก่อน

    Thanks a lot for your review.

  • @jc2200
    @jc2200 10 หลายเดือนก่อน

    Yes, also my favorite holder! The others I have, just sit there to hold my other airbrushes, when not in use! Have not had any problems with this one! Got it for 18.99 on ebay shipped to my house. Thanks Great Review! 👍

    • @theartworkshop
      @theartworkshop  10 หลายเดือนก่อน +1

      that's the way to buy it! Hopefully others can find it at a price like that. Thanks JC!

  • @TheAIRspace
    @TheAIRspace 10 หลายเดือนก่อน +1

    yup those double hook hangers have dropped one brush too many long ago. I do have some of my own holders as well. But the iwata airbrush holder is worth the extra few bucks for sure.

  • @julianalvaradog9
    @julianalvaradog9 2 หลายเดือนก่อน

    Hello my friend, I admire your way of painting, you are great artist, I would just like to know what type of compressor they use for airbrushing? thanks very much.

    • @theartworkshop
      @theartworkshop  2 หลายเดือนก่อน

      Thanks so much! I use a silentaire dr 150. It's silent and great to work with but it is expensive. Before that I used a few different california air compressors. They are much cheaper but work very well. Can be a bit loud though. Hope this helps!

  • @edwardmcdonough1426
    @edwardmcdonough1426 9 หลายเดือนก่อน

    Looks like a great holder and I'll pick one up soon! Great assessment & recommend as usual, well done. OK, but the Easter Egg in your video is the new Morbius detail airbrush with the number 2 needle! I just got one in the mail & it looks exquisitely well made; it looks like an affordable alternative to your favorite Iwata Takumi. My hobby room is too cold right now so I'm looking forward to your assessment of it. Great video!

  • @OldFlapper
    @OldFlapper 10 หลายเดือนก่อน

    Thanks for this recommendation, just the job! Did I spy a Gaahleri Mobius 0.2 in your video? I was hoping you'd get one because I'd love to know your opinion of it. I just bought one and for the money, it's fantastic. Thanks again for the fabulous review.

  • @vipersniper843
    @vipersniper843 4 หลายเดือนก่อน

    Going to have to get one of these

  • @RyanJobbagyFineArt
    @RyanJobbagyFineArt 10 หลายเดือนก่อน

    Thanks Mark!

  • @tonysouthern3049
    @tonysouthern3049 8 หลายเดือนก่อน

    I wish I could say your video helped me decide if this is a good holder! Due to the dark background and no trigger airbrush is the reason!

    • @theartworkshop
      @theartworkshop  8 หลายเดือนก่อน

      I agree, the black background was such a mistake! I realized it too late so my apologies for that. I did include a trigger airbrush at 7:03 though

    • @tonysouthern3049
      @tonysouthern3049 8 หลายเดือนก่อน

      I didnt make it that far in the video. My eyes were killing me and I just scaned the cursor along the time line and didnt see it. Ill go back and watch that section. I just picked up the Harbor Freight and my trigger brush dint fit. It is one of the Swallowtails with the fan cap. My apologies for missing the trigger brush!@@theartworkshop

    • @theartworkshop
      @theartworkshop  8 หลายเดือนก่อน

      I hear you on that. I'm actually ordering new backdrops so this doesn't happen again. I appreciate you letting me know. It's very helpful so thanks so much! @@tonysouthern3049

  • @jamesl4446
    @jamesl4446 10 หลายเดือนก่อน

    I use this holder, and i agree 100%

  • @johnathan133
    @johnathan133 10 หลายเดือนก่อน

    O nice it works with the Hp-th. I have always wondered if it would work with it. I might pick one of these up now.

  • @spencerthode3581
    @spencerthode3581 7 หลายเดือนก่อน

    Just ordered the last one off amazon

  • @AndrevwZA
    @AndrevwZA 10 หลายเดือนก่อน +1

    It looks like it can handle a 3rd arm.
    When's the review of the Mobius coming out?

  • @squidskunk
    @squidskunk 10 หลายเดือนก่อน +1

    one brush that holder would not work with is the paasche ab turbine airbrush...i own that brush...now im dating myself..lol

    • @theartworkshop
      @theartworkshop  10 หลายเดือนก่อน

      haha! you're right about that. I'm going to order one of those one day to check out for the channel. It looks amazing

  • @ColinRichardson
    @ColinRichardson หลายเดือนก่อน

    You are gonna hate that I just use a Spray Out Pot as my only airbrush holder.

  • @vasili55-t5h
    @vasili55-t5h 10 หลายเดือนก่อน

    you recommend harder steenbeck

    • @jc2200
      @jc2200 9 หลายเดือนก่อน +1

      I have h&s holders, but will only hold hns airbrushes! Won't hold any of the airbrushes I have now! Won't fit Iwata,creos,badger! Hope this helps. It fitted my hns infinity good when i had it but never trusted the hns holder to use as when airbrushing, always felt it would lose grip. Hope this helps you!

  • @juanQuedo
    @juanQuedo 10 หลายเดือนก่อน

    Looks sturdy, but I am a cheapo and it costs around 40 dollars. Money conversion is a pain.

    • @theartworkshop
      @theartworkshop  10 หลายเดือนก่อน

      I hear you on that- 40 is a bit too much for me too.

  • @KD0AFK33
    @KD0AFK33 3 หลายเดือนก่อน

    The Chinese version is better. The screw that holds the holders to the base is all metal and it comes with a bracket to hold an air filter water trap and costs half the money.