G’day mate ! I have some technical issues with my Flysky FS I6x , I can’t connected to my orange cube + flight controller using Mission Plannee to do the radio calibration, any words of wisdom you can help me with please ?
Can we set on/off switch with one switch for other toggle switch in FS-i6x, Like if set 'SWD' in Up position then 'SWA' gives 0 signal (or do not set to anything if we toggle it up or down) but if we toggle 'SWD' down then 'SWA' Gives the signal (if its up then 1000 and if down 2000) as normal as it should??
Thanks for the proper explanation bruh and for people who just think three modes are enough ...do the first step change the aux channel and skip mix continue with channel 5 end points i am not sure if you even need that....and bro how can i contact you i need some help with my hexacopter
@@techathome no bro its different i am not able to do it it is possible but you cannot change the whole channel 5 to 3 mode switch pls make a related video pls help
@@techathome i think because its in stabilize mode, in loiter or pos hold mode the descend should be controlled by barometer pre defined rate so it will come down slowly
sir aapse contact karna ke mujhe pls email id dijiye usme contact karke aapka whatsapp number lena he // aapka channel promote karna he and drone banane me kuch aapse jankari leni he drone ke liye pagal hu .bahoot saare drones he mere pass .
You are genius
You unlocked 6 flight modes❤❤
❤️
This helped me setup flight modes on my FS-i6, thank you!
Welcome
Thanks, man,,, I was rigorous searching for such tutorials...
I love you for ever, I have been here for days and just found your video and it worked. Australia thanks you 😀
Welcome
Very useful tutorial for a beginner like me, God bless you.
G’day mate ! I have some technical issues with my Flysky FS I6x , I can’t connected to my orange cube + flight controller using Mission Plannee to do the radio calibration, any words of wisdom you can help me with please ?
Can we set on/off switch with one switch for other toggle switch in FS-i6x, Like if set 'SWD' in Up position then 'SWA' gives 0 signal (or do not set to anything if we toggle it up or down) but if we toggle 'SWD' down then 'SWA' Gives the signal (if its up then 1000 and if down 2000) as normal as it should??
Can we use Bidirectional ESC for quad copter? Do we required any additional setting or something for that?
Sir i have a question when I arrem the motar it spin fast on throttle 10 % it's spin very fast how to slow down speed in apm 2.8
Thanks for the proper explanation bruh and for people who just think three modes are enough ...do the first step change the aux channel and skip mix continue with channel 5 end points i am not sure if you even need that....and bro how can i contact you i need some help with my hexacopter
Long press cancel button to save.......🙏 Thanks....i did not know that....
Thanx fr this but do you now how o reset remote all settings, if you want to do all settings again...
Use switch C and Switch D
Kindly tell if I wish to use only channel 5 for flights mode ,I mean only 3 modes ,so what will be the pwm and I set up this?
Bro which channel is used to fly mode in transmitter
5 and 6
This is an excellent tutorial- thank you very much. Your videos are very well made and clear. Brilliant!
Bro thanks for this video iam searching for this video
As soon as I on transmitter arducopter is been disconnected and not Abel to calibrate radio controllers what to do?
Thank u for this video...
Welcome
Thanks for your video
Bro how i move second column value of endpoints?
What button you pressed?
Use the switches C and D.
3:21 how to move arrow mark to second row
Use Switches C and D
hello
Please i need help how to set transmitter
Yes
If I arm The automatic motor rotate
Even if the throttle is not increased?
Yes, they will start to rotate slowly,
That is no issues,
@@techathome If I increase it a little, it becomes high speed?
Setup it up with throttle curve move mode on transmitter ,I have also the same problem,now I adjusted it
Hello.. what is current 'pwm value' below the current mode? What the values supposed to be there? In my pc 1100 for stabilize.
Those values will vary, don't worry, just check whether flight modes are changing when you toggle the switch
@@techathome thank you👍
Can i make bicopter using APM 2.8
Yes
Can you make video for bicopter using apm 2.8
Thank you!
Good very helpful
HELLO SHOW ME HOW YOU PROGRAM A HELICOPTER ON THE MINI PIX M8N RADIOLINK
Can u do same but for flysky fs-i6s transmitter? Thanks 😊
Sorry I don't have that transmitter.
I guess the buttons are different,
@@techathome because in Mix#1 not possible master ch5 and slave ch5 as well
Can you suggest 6 flight modes for a drone without gps.
I think you need GPS module for flight modes
Bro I have a question we can keep 30a ESC to 1000kv , 1400kv, 2200kv bldc motor or we have to change ESC while changing motor of ****kv
You can use 30a
Drone slips at one side during take off. What may be the reason?
th-cam.com/video/P-HbV_d7dIU/w-d-xo.html
Once try this procedure.
When I turn the key on the radio, it doesn't change in the mission planer, and the gps is in Land mode in flight mode 4, help me there.
Have you assigned channel 5 and channel 6 to switches C and D (in my transmitter, we have done inside AUX channels)
gracias por explicar
Welcome
Hello my friend saw in your video that you managed to configure your apm 2.8, I'm here trying to configure mine, and I need your help.
Yes
My drone couldn't climb stabilized, it always falls to the side, can you help me with this?
How to go to end points second values???
Use the switches C and D
hi pls make video in how to set up switch mode in flysky th9x pls help
Is it not same as Fs-i6??
@@techathome no bro its different i am not able to do it it is possible but you cannot change the whole channel 5 to 3 mode switch pls make a related video pls help
Hi sir, i am using fs i6x transmitter, should i follow the same procedure?
Same only
Great
What is the use of Switch A and B?
Same as Switch C and D, you have to assign to channel 5 and 6, according to your requirements.
Long press ok button to access settings i didnt know that
How do this in fs i6s
I have not used that, i think that doesn't come with these buttons, may be navigation way is different,
But values will remain same
@@techathome ok
thx alot
Welcome
When i arm the drone it automatically rotates without moving the throttle
No problem with that, in my drone also same thing
BONJOUR MONTRE MOI COMMENT TU PROGRAMME UN HELICOPTERE SUR LE MINI PIX M8N RADIOLINK
How to arm and disarm..???
Arming, Throttle Stick ( down+ right ) - hold for few seconds.
Disarming, throttle stick (down+left) - hold for few seconds
@@techathome
it’s not working...
Have you done RC calibration
Bro I'm not able to change the flight modes with my transmitter switches please suggest some solutions
Please reply bro
Have you followed All steps as in Video?
Have you connected channel 5 and 6 to APM board?
@@techathome yes bro
@@techathome in the 6th ch I'm able to change only 60% but in the right side I'm not able to change it into 76%
Use that switch C and D to move the arrow
My throttle down bring the drone down really fast how can i make it come down slowly ?
It is same for me. I control manually.
Try editing in Throttle curve of transmitter, set according to your requirements.
@@techathome yes it lands really hard , i have to then give a little power to bring it up to avoid landing hard on ground. i will try throttle curve
Ok
@@techathome i think because its in stabilize mode, in loiter or pos hold mode the descend should be controlled by barometer pre defined rate so it will come down slowly
Nice
Bro mera Drone staybal flying nahi ho raha hai throttle up karna sa drone right side flying karta hai please help me
Try this : th-cam.com/video/P-HbV_d7dIU/w-d-xo.html
How to arm through controller bro??
Keep the throttle stick to minimum position and move towards right,
Watch this : th-cam.com/video/8-3I2Xot3pI/w-d-xo.html
you are giving values to the channels but no explanation why?
Lotre not working
Not selecting chanel 5 first
It not wotking with my fs i6
Have you assigned AUX channels to switch C and D
@@techathome there are only vrA , vrB and none, i cant see swA and swB.
sir aapse contact karna ke mujhe pls email id dijiye usme contact karke aapka whatsapp number lena he // aapka channel promote karna he and drone banane me kuch aapse jankari leni he drone ke liye pagal hu .bahoot saare drones he mere pass .
Vi please mujha ak 11.1v 3s
5200mah lipo battery ka link do please. Indian website ka please vi please.
robu.in/product/orange-5200mah-3s-40c80c-lithium-polymer-battery-pack-lipo/
My drone is not arming .....
Do the sticks calibertion once again properly and check
@@techathome how can you explain .....plz
I cant install mission planner in my pc😭😭😭😭😭. Please give me mission planner link🙏🙏
ardupilot.org/planner/docs/mission-planner-installation.html
@@techathome thank you so much 🙏
i want to make a drone using ardupilot but im not having $$$
Tom hindi nahi jante😅
No