hi, i did all your steps one by one and everything went smooth as you showed. but when i do arming, it doesnt work. i have observed that if i do armimg with usb cable connected and battery as well, only then arming works but when i disconnect usb cable arming no more works
i made same like this but it tilting one side i used mission pilot and all calibrating done but not lifting smooth, it tilt one side please tell me what to do now
They forgot to calibrate each ESC . Each motor should spin equally when armed. This will cause destabilized flight on trying to take off and drone will flip on one side
dont order from rees52 , these guys just keep a wide stock of products and as soon as u place order , they cancel it from their side and never refunds ur money , i lost my money , i tried to contact them and as soon as they understood that i am calling regarding the refund ,they disconnected and was never able to contact them again
![Flysky fsi6 3-mode switch setup | Flight Modes setup in mission planner [Altitude hold,RTL,flip]](/img/n.gif)
bahot bahot dhanyawad itni gehrai me jake poora process explain karne k liye..pixhawk pe bhi aisi video hai?
Is APM and receiver getting power from esc?
I have also bought kit from Rees52. In the video observed that reverse calibrated nose up & down.
Hope to see another big projects next time
sure !! Thanks
Can we use 5300 mah 3s 11.1v orange lipo battery for this drone.?
YES SIR
Are the xt-60 cable and the nuts ans screws included in the kit? I am hoping of buying it.
No xt-60 cable is not included in the kit. We bought it yesterday and there wasn't a xt60 cable in it.
Hi Your drone can return to hom ? Thanks
Hi, did you use PPM Encoder?
No we didn't use
Sister you are amazing 😍 girl also love IOT
can this carry a go pro.
What was his flying time
Can you make a vedio separately for receiver and Transmitter fsi6
Sure, we will make it soon
Your forgot to calibrate the 4 ESC . Each motor should spin equally when armed otherwise on take off flight will destabilize and flip to one side
hi, i did all your steps one by one and everything went smooth as you showed. but when i do arming, it doesnt work. i have observed that if i do armimg with usb cable connected and battery as well, only then arming works but when i disconnect usb cable arming no more works
Hi , I am not getting the white dots on the compass calibration screen
Please help
i made same like this but it tilting one side i used mission pilot and all calibrating done but not lifting smooth, it tilt one side please tell me what to do now
please mail us your query on support@rees52.com
Calibrate each ESC. The instructions are on ardupilot website
I am buy some products on your site but i get only few item what i do
I think you forgot to calibrate the ESV as I can see at the end of the video, the bottom left motor does not smoothly revolve
ESC*
Or it can be that it is in altitude hold mode..
They forgot to calibrate each ESC . Each motor should spin equally when armed. This will cause destabilized flight on trying to take off and drone will flip on one side
Ye quadcopter kitne der tak udta h
it depends on the battery's power.
Nice sister
Does the altitude hold work without gps or telemetry
No it can not
REES52 then for altitude hold what I want gps or telemetry
In the video you didn't used telemetry or gps but in ardopilot you are choosing altitude hold mode
one problem is that madam this local a2212 motor and the esc life is not good might can get damage at once , the better issunny sky
It depends on how you are using them...
Is this site is trustable plz tell nad make some other combo with telemetry and gps i want to purchase this combo
Yes you can purchase from this website.
Bhai aap Delhi ke hoo na
Yes , www.rees52.com
Ha mara area ka ha
Didi usb cable drone kea kiddhar lagayengea
Where is power module for apm2.8 and how is the flight controler board powered
They are powering apm using esc. No seperatepower module used. Its better to attach a power module as it reduces load on esc and prevents crash
Quite a different way to connect the ESC to the receiver. Normally you would connect 1 to 1, 2 to 2 and so on.Did not get that point thou.
Hi , in mission planner, i am not able to do accelerometer calibration, after tilting left, calibration fails. any solution with anyone?
how to add camera and gimbal to this drone?
Gimbal kharid
kit purchase link open ni ho rha h
rees52.com/quadcopter/2261-test-a-gy-9150-mpu-9150-3-axis-electronic-compass-acceleration-gyroscope-module-interfacing-with-arduino-uno-kt701?search_query=QD001&results=1
It is working . you may have some connectivity issues.
Can I get the link to download the mission planner?
You can download it from the ardupilot website.
Mavlink not connected pls help me....
Please mail us your query on - support@rees52.com
Minor mistake ,how to connect motor wire cw,ccw in esc
I have a problem after setup complete. When I try to start,the motor didn't move. Why it's so
Mail us on support@rees52.com
Hello, how to add gps to this
Purchase site indian hai
Yes
My drone is not flying smoothly. one side is tillting. i need help
Calibration of esc
Esc calibration needs to be done in all cases . This video doesnt show that
Sir, why showing flight modes unknown and empty in mission planner
mail us your query on - support@rees52.com
That's might be bcoz u have not connected the ardupilot correctly or not selected the port
Brother u have not used the power module why
bina power module k bhi ESC se APM ko power mil jati hai
Power module ke jaruratha nahi he kya
In the next vedio GPS setup Krna mam
yeah sure
APM2.8 not conect my computer
My Quadcopter is flipping while takeoff
Haaaaaa😢 Pls help my drawing is moving sideway and yawing instead of taking off smoothly...
Anybody can give me information about UAV which has range of 500m to 1km
Range depender on trasnmitter . Flysky fsi6 has 2 km range
Link in the description is not working
which link is not working ?
please check again
@@rees5286 cool I can see it now.. it was the kit link.. working now..
Thanks for the prompt reply.
Stick mode pe vdo dale
we will make it soon
you have a APM 2.6
No it's APM2.8
am i right?
Fraud spam untrain staff pls don't buy anything
Pl call me when you see my msg for help
Sorry sister
Women ☕
dont order from rees52 , these guys just keep a wide stock of products and as soon as u place order , they cancel it from their side and never refunds ur money , i lost my money , i tried to contact them and as soon as they understood that i am calling regarding the refund ,they disconnected and was never able to contact them again
Dear sir,
kindly provide me your reference order number your problem will be solved eod