I cannot get the flash to set in slave mode, it remains in RX, so I cannot change the power settings in the off camera flash with the Xpro trigger. I'm new to flash photography so I have everything set in TTL.
RX - means the receiver unit (earlier which was SLAVE Mode). While TX is the transmitter unit- also known as Master. So when V1 is in RX mode Xpro should be able to communicate. You need to make sure the channel set in both devices is the same, and also in Xpro, you are changing the values of the group, the Flash is assigned to. eg- If Flash is in Group B you need to change the values of Group B on Xpro. Hope this helps.
@@sayantanduttaphotography I have both off camera flashes in the same group, the same channel and the same ID. They work, but the problem is, when I change the compensation on the Xpro trigger is does not change it on the flashes. I have 'M' turned off. Is that supposed to be set to something?
how to get 14mm to 24mm wide area coverage with this flash . if you have to directly fire flash a group which can be covered by 24mm outdoor where no any option for bounce from ceiling. and how to get 14mm wide flash coverage with it as no any wide angle panel is provided as with 860 model
Thanks so much, got my new one so I find this helpful apart from the manual provided
Thank you. for your kind comment. It motivates to create more
I cannot get the flash to set in slave mode, it remains in RX, so I cannot change the power settings in the off camera flash with the Xpro trigger. I'm new to flash photography so I have everything set in TTL.
RX - means the receiver unit (earlier which was SLAVE Mode). While TX is the transmitter unit- also known as Master. So when V1 is in RX mode Xpro should be able to communicate. You need to make sure the channel set in both devices is the same, and also in Xpro, you are changing the values of the group, the Flash is assigned to. eg- If Flash is in Group B you need to change the values of Group B on Xpro. Hope this helps.
@@sayantanduttaphotography I have both off camera flashes in the same group, the same channel and the same ID. They work, but the problem is, when I change the compensation on the Xpro trigger is does not change it on the flashes.
I have 'M' turned off. Is that supposed to be set to something?
Super adeivce 🙏🙏🙏
how to get 14mm to 24mm wide area coverage with this flash . if you have to directly fire flash a group which can be covered by 24mm outdoor where no any option for bounce from ceiling.
and how to get 14mm wide flash coverage with it as no any wide angle panel is provided as with 860 model
Please purchase the Light shaper set called AK-R1 and the round-head adopter. All the issues will get solved
We know that on full power it can shoot up to 480 times, what about on half power ? Is it like 5000 ? Or on 1/256 how many pics ?
Law of relativity applies. Lesser power will give more number of shots approximately proportional
Type c cable jo flash mai h side pr usse kese charge hogi flash
what is rx mode, at master
RX Mode is indicating the device is in - Slave Mode (Orange Glow).
Hi wasn't know about the v1.
Happy that my Video helped you to know about this fantastic product