How to Increase Power of the Brushless Tools? (ESC Hack)
ฝัง
- เผยแพร่เมื่อ 10 พ.ย. 2023
- #ErCanEverything #Parkside #BLDC
⚠️ATTENTION❗
This hack can cause damage to your tool and don't try on your tool! I'm just showing that it's possible.
🔥In this video, I will increase Power of the Parkside Performance PABSP 20 Li C3 60Nm BL Drill by 50% with a Simple Trick.
👉 • How to make DC 200V 20...
👉 • InfiRay P2 Pro Portabl...
👉 • Parkside X20V Team cor...
🔥You can find the featured products here👇
📌InfiRay P2 Pro Thermal Camera s.click.aliexpress.com/e/_ExU...
📌DC 200V 200A Energy Meter s.click.aliexpress.com/e/_Eyr... - แนวปฏิบัติและการใช้ชีวิต
All fine and dandy (simple solution), but how about component longevity impact? Battery, ESC, motor? Lifespan could and I think will be much shorter...
I don't know if anyone will force it to that extent. I think a person would only need this power for a few seconds and then have enough time to cool down until a second round.
If you noticed, I got on the table because I was tired😂
Great hack. Loved that you stood on the table to get more force on the drill 😂
I was tired, so I got on the table🤣
Now you just need to increase the strength of plastic and internal components like gears !
Great idea and video. I didn't see any temperature sensors for overheating protection in the motor? From what I could see the power consumption before the motor stalls increased ca 30% (to ca 930W!). The motor heat didn't seem to increase that much but the heat in the motor could become a problem quicker if used at full power continuously for a longer time.With the 8Ah smartbattery the max power could be near 1000W! With so much more power I would worry for the gearbox, but it doesn't seem to get much warmer, which is a good sign.
I think the temperature sensor is in the controller, but I haven't paid attention.
Really nice and neat workshop!
Thank you my Friend🙏🙂🤝
@Er Can Everything
Can you please also show how to deactivate the "soft start" on the Parkside 40V green chainsaw?
This would be absolutely amazing.
😲😲😲
Beast on storoids!
So much power 😱
Thanks for sharing tips and tricks wit us Brother ✌️
I really like this beast😍
It's so compact and easy to disassemble.
Wow very nice 😊
Hi, great video! Is this C3 model better than C2? I have C2, is there a good reason to change it for C3?
Hi I wanted to ask you if you recommend limiting the current to 60 Amps instead of 100 Amps inside the software Lidl app Bluetooth?
Or is there any risk set to 100Amps to burns out the final voltage regulator on 8Ah BMS battery?
I ask you this because I have seen many videos that the voltage regulator on BMS battery burns out probably for over current
Thanks
Jestes the best. Bardzo lubie ogladac twoje filmy.
Thank you very much!
Respect 🙏🙂🤝
You are very creative, I respect from a distance❤
Thank you my Friend🙏🙂🤝
Hi. My parkside pabsp 20li c2 only makes part of a revolution and stops. when the button is pressed, the LED goes out. All power mosfets are intact. What could be the problem?
Can you give a link of shunt? Smd 2512? 5390?
Thanks!
Nice... but why not use impact driver tool? That goes through wood like through butter
Also the 8Ah battery
Hi, I have this exact model and it has delay when trigger is pressed. I also bought c4 2 days ago and it has the same delay. Do you have any solutions for this. For example c2 is great and very responsive on trigger.
Very interesting.
Any data on what the rated amps/watts of the motor?
And what about places to buy the motor alone or even buy better motor version ? Is that a thing? Could even be a video ideia. "Upgrade tool motor"
Might be sketcy version and diferent thing but saw same reference motor with 50-60A and arround 1040 W max. So i guess what you did is on sweet spot
I have not looked for such motor, but I can say that the thickness of the wires is the same as the angle grinder D4 version 1.10mm
What bit are you using?
Very nice and usefull hack. Can this break the tool or will the overheat protection safe it ?
I don't know if you need to use it at full power for a long time. I think it will take a few seconds to tighten a long screw or drill with a thicker drill bit🤔
What kind of resistors did you use? Think of trying out this mod😁
Czy w tej wkretarce z udarem 150nm też to robiles? Już kupiłem czekam na wysyłkę i też bym to zrobil
Twice I tried to open it but couldn't and I didn't force much.😄
Very cleverly built, I think the front aluminum shroud holds the plastic handles, also the handles keep the shroud from coming forward🤔
@@ErCanEverything Na TH-cam widziałem kiedyś film jak ktoś rozbiera ja do porównania z wersja bez udaru. Jak znajdę podam link
@MarioMotoVlog This will be useful but if we increase its power it will surely break. Once I saw how smoked, but there was no problem and it's working.😊🤝
Typie jak ona bez przeróbek bierze 900 wat to akus nie wyrobi jak będziesz chciał przerabiac
I can't actually notice any different on the sound it makes. I guess i should ask you if you notice any different and if that difference is 50% more power. Thanks for your video
Definitely there is a difference on power, but whether it's 50% or 30% I can't say, but as you can see 1:15 the power does not exceed 700W, while after the modification it reaches 1KW 7:08 7:33 8:00🙂
will this work for the »PDSSAP 20-Li C3« too?
This mod increases the power and not the speed of the BL motor.
And to increase the power of the impact requires more RPM. It will not work in impact.
What is the discharge limit of the bms?
150A
Nice job but if only it was that easy to other parkside tools, like the 150nm or even the 80nm units. Their control board is completely sealed,no way to get in.
Thank you🙂
There is a way to do this, and I even went into the control board of the D4 angle grinder already but I couldn't restore otherwise there would be a video.
@ErCanEverything try the 150nm . That unit definitely needs it. It is a pitty that is surpassed by the erbauer that is rated at 120nm.
Lithium ion battery 🔋 has C rating , some rating cross Lithium ion battery will fire 🔥 ,good idea 💡 but not for long time
You are right but this battery is also intended for a brushless angle grinder which I was able to measure 75A without modifications
th-cam.com/video/pkrseDZ4p_c/w-d-xo.htmlsi=fZCtdM8WA812TObI
0:53 hold like that you are blocking airflow.
I know but I had to push hard because there is no handle and that's why it is.
‘How to explode your drill’ cit.😅
Next Lidl influencer.
No
Dont do this...
I did and two have same issue after a couple time.. rhe went into.. overpower.. and do not work anymore..
Sorry but this "tuning" is a pain in the butt