Making Powerful Brushless Motor From DC Brushed Motor
ฝัง
- เผยแพร่เมื่อ 22 พ.ย. 2020
- #creativethink #freeenergy #brushlessmotor #bldcmotor
In a brushed DC motor, the rotor spins 180-degrees when an electric current is run to the armature. ... In brushless DC motors, the permanent magnets are on the rotor, and the electromagnets are on the stator. A computer then charges the electromagnets in the stator to rotate the rotor a full 360-degrees.
-------------------------------------------------------------------------------------------------------------
Components Link :
1. Shaft (6mm)
amzn.to/38IRkXS
2. Shaft (3mm)
bit.ly/38LQHw0
3. Copper Wire (.91mm)
amzn.to/3nNSUib
4. bldc controller
i). amzn.to/2SlKEre
ii). amzn.to/2SpYd92
-------------------------------------------------------------------------------------------------------------
Facebook Page:
m. creativethinkg...
Instagram:
/ creativethinkgr
Twitter:
Creativethinkgr?s=09
TH-cam: / @creativethinkideas - วิทยาศาสตร์และเทคโนโลยี
If only it were actually this simple to open sealed brushless cans
It Is Really Dangerous To Drill Metal Without Clamping... That Drill Bit Can Stuck And Cause An Injuries To Your Hand... Please Be More Careful Nextime Boss... Fastest Will Not Be Always The Best....
Thank you so much for this I have been wanting a brushless motor for so long but didn't have the funds to purchase one. This is awesome because because I have 3 heavy duty drill motors that are almost Identical to the one in the video, Once again thanks A LOT. This motor will be used to develop my RC car even further THANKS
Good work, need to do something for stabilization and shaft locking
تطوير وتعديل على المحرك DC القوات صغير
Idk wtf you did or why but I did clap and giggle when it turned on
احسنت ماشاالاه،،و،،مرحبا
Very good
I wonder if you dimple the top with triangular holes folded in if you can create an impeller that will push air across the coils to help cool them.
Unless there's a built in fan that isn't an option
@@DAMN__________ Yeah, some DC motors have built-in propellers on their armatures
Hi good job and thank you for sharing.
A lil suggestion,i bet if you used thicker copper wire i bet it would've run faster and a bearing on the top side...
Yeah this thing won't last, you can hear the inbalance. Concept is good tho
Beautiful conversion
Great tinkering skills, I miss those days.
Holding a small round piece of metal with sharp edges while drilling into it is not a great skill. It's flat out stupid
@@chrispollard6568 we all ( me included ) made that mistake. Lol 😆 more than once
I dont mean to be offtopic but does someone know a tool to log back into an instagram account??
I stupidly lost my login password. I would appreciate any assistance you can give me.
@Ahmad Brendan Instablaster ;)
@Alan Abdiel Thanks for your reply. I got to the site thru google and im in the hacking process atm.
Seems to take a while so I will reply here later with my results.
Nice Idea! I would use a delta connection though...
Brush I had same idea at first when I bought my first black motor 😂 brushless motor is just basically inverted brushed motor
ستاذي المغناطيسات ضعاف بدك مغنطيس مونيديوم بدل هدول
interesting, you have some good skills!
Keep it up create more
This project is very good!
More current then at a similar voltage? More watts, so to speak, more heat given off by the "improved" motor. Perhaps an attached fan might be a good idea to extend the useful life of this 'improved' motor?
Brushless motors have higher efficiency compared to brushed so lesser percent of the electrical energy transforms to heat...
Its ironic how he says to use a fan that uses a motor to cool down a motor.
Nice work, if you modify this to apply somewhere I would love to see it doing work, again cool vid mate 🙂
The most a balanced motor
Kreatif
1:02 Me when the tomato sauce won’t come out the bottle
8:42 リードカットせずにブラシに半田付けすれば良いのに。
Good night
💯💕❤💘
Nice, can you make Apple from Samsung?
Excellent,idea
Mantab bos 👍
You don’t solder crimp contacts.
Wow
Really good ideas
Nice work but I am interested in the driver you used can you explain it in another video
sensorless bldc motor at lowest quality.
nice project
Moi c'est modeste je sur très content de vos vidéo
Where to find this metal disc you used for the base of the motor ?
Oh
Indian jugad!!!
Great, excellent, good imagination
In 1994 I have done a experiment_ I rewind a blender motor with a land line telephone cable, it’s work better than before’
And in 2022 ending I have Done a experiment_ I rewind a Dc motor 12 volts with a Internet wifi router cable, and it’s successfully working better before speed and torque..
Durvesh yezdani’s
Mantaaaap..
Amazing 👍👍🇲🇨🇲🇨
Orang Indonesia juga nih. 😆😆.
@@fabianmof3001 siaaap juragan. Mampir yuuk ke channelku. Semoga ada yg bermanfaat 👍
@@apibirukreatif Siap maskunnnn. 😉😉
I will try at home
Wo 3 wire jisme 3 LDC wala joint kite the , wo 3 kon SA wire tha
Creative video, thanks for sharing, like it :)
You didnt but any bearings in it, the shaft will wear out and come loose after a little use
Good work
Now thats skills
Wow verywonderful idea
Love u sir
Thank you for your support
@@creativethinkideas yw sir
I need your support
Plz support me
Love u sir
Your great work keep it up💓💓💓
@@ntcideasinfo2157 😂😂😂💣💣
Where can i buy the plastic 5 blade propeller
This comment is not fake
Very good 👍👍👍💖💖💖
Super 👌👌👌
Call the OutRunner motor cheaper to buy
ممتاز
wow good idie bro 👍
Pls make boat with this motor
Bravo, for getting those magnets out without busting them.
wire size ??? cost of controller ???
U R No. 1
Don’t the wires short out because they are touching each other. Or do they have protective coating?
They have a insulating coating layer.
It will be fine as long it doesn't get too scratched up
Nice Demo of how it can be done, but pointless: the Brass bearing will wear out and the outer bell will start wobbling.
Given the price of a real BL motor and a matching ESC to geht a higher efficiency factor than a cheap brushed using simple Control and Most probably this one (60-80% --> 90%), this approach doesnt pay, als you still need the ESC.
@@haraldhechler3557 the real advantage of brushless is, that they are being produced over a wide range of power/rpm/torque, so that you can prevent an extra transmission, whereas such a mod is limited to different windings.
Many of these DIY videos claim, new BLDCs are expensive, buz on the other hand, there are countless of them available in harddisks, old floppy drives and optical drives, each of them better in some aspect than modding an old Mabuchi standard 380/480/540
Mega
Rất hay 👍👍👍
Creative 😉
That table behind where you buy from? That square designed table
Super Anna
This is f’ing beautiful lol thank you x:)
How’s the runout on that drill press?
خ
كههع
عت
ا ...خخك٠خ٠خح توونوززوزوتتتععززززززززننننكحكطحششض١ضض٢١ضضضهزوووةى ةةىىةةرشضششششؤررىىاىئلللف
Thx
Ни xyя не понял для чего всё это было нужно, но было очень интересно...🤔
Good video
Use thick wire to increase its power
Make a video of BLDC controller .
will it over heat??
First. 😉😉.
I'm from Indonesia. 😉😉😉.
Thank you for your support
Yes, if you start from the bottom ....
I had the same idea of convert a three pole rotor dc into a brushless exactly that way and using a RC inverter. The problem could be the bearing...
How do you know witch wires are out and witch are in?
It's the top out, the bottom in
No, in a concetric array of windings 8; 10; 12 steps... the step 8 is in and the step 12 is out.
It isn't pretty, but it works!
Motor ki winding ke Sahi connection bataiye
Nice
My guy just put more wireing in the Damm motor that does not make it a brush less motor it needs to not have the connectors (brush)
How do you know the amount of wire for each section?
You wind it on and Add it up !!
Thurst is too less🤔
Good job, it appears you use a sine wave to operate it, judging by the way you connected the windings all together.
good
Can someone tell me.. if it would add to the rpm of the motor up more using iron nitride magnets instead of ferrite (like in the video) and neodymium which is commonly used?? Pls answer, anyone who knows for sure.
it would slow the RPMs and increase torque
Can u use this on acg stator in motorcycle
Aur Iske bare mein bataiye Jo 3 face wala circuit hai
it doesnot fly so bad
but good job
It's the same thing
Cool bro
Nice 👍👍
Thank you for your support
@@creativethinkideas thanks 💗 for CREATIVE vedio's
How many motors can be operated simultaneously with a BLDC controller?
one
Sir can you please tell me about the driver circuit.
И в чем смысл сделать из моторчика моторчик??? Как по мне Бессмысленное занятие 🤔🤦♂️🤷♂️
Прям винта нигде не завалялось на полках, то пошел бы на речку нашел, заодно отреставрировал
but to leave it as it was, wasn't it done before? The fantasy is running out ...
Mükemmel
but kiya kya or hua kya itni mehnat karne ke bad
Don’t trust random links that are in the video it could lead you to a similar website of whatever and steals your information.
120 turns kis no.ke taar ke
Bayar no.to bataoo
How i know Ain or Aout?
Shortcut...
It's taking a commercial induction motor, and turning it into an early abandoned design for induction that never had any practical application.
Scam for views.
RPM??? Kitna hai?