Both are very similar if not the same. The truck in this video is also 2WD so I would say, yes. Don’t forget to hit that SUBSCRIBE button. We are currently working on an 88 Ford Bronco and just getting started on a 1972 Pontiac Firebird Formula 350. Also, If you check out our last video. We are going to be doing a giveaway to a subscriber once we reach 1K subscribers. Information is in the video.
@@fixtherustbucket thanks I have already subscribe to u buddythis video coodnt have com at a better time going to do all that tomorrow thanks u do very well job explain what your doing thanks got video on change n rear end out an leaf springs ✌️
Unfortunately there is no specific kit for what I installed. I pieced everything together from www.rockauto.com. I wanted everything heavy duty so I had to order individual parts to get what I wanted. I reused the original upper and lower control arms, axle spindles, Springs, and hardware. Reply
For the upper control arm did the polyurethane bushings not have a sleeve? In the previous video It looks like you had to cut off the washer ends from the original UCA bushings and now using them upon installation but I don't see you inserting a sleeve only the bolts, is this correct?
The kit I ordered did not come with sleeves for the uppers. Don't know if it was packed incorrectly or not supplied with this kit. The company never answered my email sent to them. I was in a hurry to get the front end back together. I ended up finding a local shop that took the measurements from the bushing and bolt and cut four sleeves for me. I thought I covered that in the video. My apologizes for not mentioning what I had to do. The upper bushings need to have the sleeves to perform correctly.
Unfortunately there is no specific kit for what I installed. I pieced everything together from www.rockauto.com. I wanted everything heavy duty so I had to order individual parts to get what I wanted. I reused the original upper and lower control arms, axle spindles, Springs, and hardware.
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
Thanks for the video. About to buy suspension kit for my 2002 Silverado 2500HD. Your tutorial will help me.
Is this install the same for my 04gmc excab 2 wd
Both are very similar if not the same. The truck in this video is also 2WD so I would say, yes. Don’t forget to hit that SUBSCRIBE button. We are currently working on an 88 Ford Bronco and just getting started on a 1972 Pontiac Firebird Formula 350. Also, If you check out our last video. We are going to be doing a giveaway to a subscriber once we reach 1K subscribers. Information is in the video.
@@fixtherustbucket thanks I have already subscribe to u buddythis video coodnt have com at a better time going to do all that tomorrow thanks u do very well job explain what your doing thanks got video on change n rear end out an leaf springs ✌️
What parts to you use?
Unfortunately there is no specific kit for what I installed. I pieced everything together from www.rockauto.com. I wanted everything heavy duty so I had to order individual parts to get what I wanted. I reused the original upper and lower control arms, axle spindles, Springs, and hardware.
Reply
For the upper control arm did the polyurethane bushings not have a sleeve? In the previous video It looks like you had to cut off the washer ends from the original UCA bushings and now using them upon installation but I don't see you inserting a sleeve only the bolts, is this correct?
The kit I ordered did not come with sleeves for the uppers. Don't know if it was packed incorrectly or not supplied with this kit. The company never answered my email sent to them. I was in a hurry to get the front end back together. I ended up finding a local shop that took the measurements from the bushing and bolt and cut four sleeves for me. I thought I covered that in the video. My apologizes for not mentioning what I had to do. The upper bushings need to have the sleeves to perform correctly.
Can you link me where you got this rebuild kit from I’m kinda new and in a bind 😂
Unfortunately there is no specific kit for what I installed. I pieced everything together from www.rockauto.com. I wanted everything heavy duty so I had to order individual parts to get what I wanted. I reused the original upper and lower control arms, axle spindles, Springs, and hardware.
Thanks awesome video 😊