Hey bro I have one suggestion replace jio wifi router with smartphone. Use its video call feature for live video streaming and mobile hotspot for connecting raspberry with internet. I hope you like it and will apply in next virsion.
Great work friend...Why not using QGround control + Zerotier + MavProxy. That way you have live video , telemetry and everything very safe... putting the raspberry in between RC and F/C is very risky.. last think you want to experience is RP stops responding and then you have no contorl over the drone... I have exactly done this with an android custom autopilot and PIxhawk and Qgroundcontrol as well... Maybe create a video of that later.
it isn't necessary to use ardupilot? I think gps, pwm signals, sensors could be controlled trough raspberry pi. It would only need module for connection directly to pilot without internet. Am I right?
hey bro ... its really good and my question is i am a MEARN STATCH DEVELOPER... So i am strong in JavaScript so with my technology i will able to do this one ??????????? please response ME :)
What is the flight time, battery capacity and weight of your drone? I have recently built a very similar quadcopter, but with live fpv and camera, it weights 2kg and flies only for 10 minutes with a 5000mah battery, any tips?
It's a great project, please can you explain how did you connect the raspberry with drive controller ? Which ports did you use? In the raspberry and in the control drive?
Sir if i made a drone using this transmitter and receiver and APM 2.8 flight controller, in Apm 2.8 have a mode RTL(Return to launch) When the drone is goes out of range then the RTL mode will activate automatically, so if i make drone using this transmitter and receiver, and my drone will go out of range then will RTL mode activate automatically in apm 2.8? Please reply.
Sir yesterday I checked by connecting to mission planner and try to arm my hexacopter containing APM 2.8 and in loiter there is an error occurred as pre-arm bad velocity and sometimes it shows High GPS HDPOS please help me regarding this...
And about latency: you should probaly set up server in local area. Check if your home router has public IP. If it does, than write a server yourself and start it on your pc. Latency should be reduced then.
Hi again, I have started working on the drone again, but I see you have developed a lot! Congratulations brother :) Tell me, is there any documentation of motor control etc? I see that you made your control app - as I had in mind :) But I got bogged down how to use the gui to send commands to the flight controller....
@@DIYLIFEHACKER yes, i know, i will use ssh tuneling, but i dont have idea, how looking comand to controlling value of throtle etc. thats why i asking about documentation I have changed plan, and it will be plane, not drone, well case is easier.
Sir I have one problem with my hexacopter. As I'm using APM 2.8 in loiter mode my drone is not arming and in altitude hold mode it is arming but after 50% throttle when I just increase it further the motors speedup like crazy and then when I down the throttle it's not slow down. It's slowing down when I fully down my throttle to zero. Please help me regarding this sir... Please sir help me I'm waiting for your response...
Bhai maine mamba f405 stack se drone banaya hai mai raspberry Pi connect karna chahata hu pr kr nahi pa raha because f405 radio telemetry ko support nahi karta maine MAVLink ke through try kiya pr betaflight ko MAVLink thik se support nahi karta, mainebhi raspberry Pi ko reciver ke sath connect karneka try kiya pn internet or koi documentation nahi hai ye karne keliye can you please share how you connected your reciver to your drone and then how did your connected your drone to the raspberry Pi ? It will help me a lot !!!! Btw ossum channel keep up the good work !!!! Love from India-Maharashtra
I m using kk fight controller nd instead of mobile app i m using transmitter reciever of fly sky i6. If will connect my rpi with flight controller nd thn with receiver;thn how should i manage the coding part ?
You bro! Can you please collaborate with me? I am trying to make an RC receiver that will be connected to the internet and thus can be given signals from anywhere in the world. I want to make an application through which the receiver can be controlled. Now, that receiver will have an electronic compass, a GPS module, and a camera, and will be connected to a GSM, to be able to communicate anywhere as well as calculate the current speed, location, and other parameters, and display them on the application. I want to program the receiver in such a way that it will be able to plan autonomous missions, by automatically calculating the distance between the points, and then give PWM signals, to the flight controller, when given instructions, just like the ones we can do with APM or pihawk. But since, the other cheap flight controller users such as kk2.1, or CC3D, or even DJI NAZA (I use it), do not get that opportunity to experience mission planning, I want a solution for them... If we can make it, and then successfully bring it into the market, via websites, it will be a breakthrough. Please reply... Thank you...
Brother it's a good though Have to done any autonomous things in any drone ? Like in Pixhawk or apm with rpi 4 or other ? Like human tracking or object detection and more ? Can I get ur mail or how can I contact u plz ?
Hello please can you make a video how to make our drone stable like yours and its calibration and what we should mate to be in this sensitivity please help when i put my drone on posistion hold it still moving even fi i put it in loiter mode i cant leave it in the same place any help!!!!
hello what is the firmware that you are using in ardupilot because iam trying to install the latest firmware but it gives me a problem any help iam using ardupilot 2.8
it was solved but for showing in the video I didn't shoot it again just edited the picture. This try was not perfect, but V4 is comming soon. That runs custom os on pi zero means faster with ultra low latency. also will test range upto few kilometres ☺️
@@DIYLIFEHACKER oh okay I See. I was also wondering how you want to maximize flight time. Did you already try high power Li-ion cells? Would be interesting to see :)
hey ......we r also trying to design a drone as a part of our academics and ur video is actually imformative if i hav any doubts can i mail u so tht u can help us out .
hello, why you need to port forwarding the 4g router? the phone speak directly with firebase and the raspberry too right? why need direct access to 4g router (public ip)? if you want check this protocol www.maqiatto.com/
![⭐ฮิตในTikTok!! ( หมูเด้ง MooDeng ) Ver. แดนซ์โจ๊ะๆ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/3krsyfWUeHU/mqdefault.jpg)
We need V4 upgrade bro....keek rocking ❤️🙌
DONE! Check It Out : th-cam.com/video/_wBepUerXac/w-d-xo.html
Please make your own flight controller, with coding explained in detail. Would love that video.
Hey bro I have one suggestion replace jio wifi router with smartphone. Use its video call feature for live video streaming and mobile hotspot for connecting raspberry with internet.
I hope you like it and will apply in next virsion.
Waited for so much for this
You are a genius bro.Allah bless you😊
Steps to do this
Step 1: Buy or make a drone first
Step 2: Complete step 1
Step 1 completed
@@kanha7045 Step 3: Swear to god that you completed step 1.
Excellent bro can you tell me where is the connection between apm controller and raspberry pi? how to communicate between RPi and apm
Great work friend...Why not using QGround control + Zerotier + MavProxy. That way you have live video , telemetry and everything very safe... putting the raspberry in between RC and F/C is very risky.. last think you want to experience is RP stops responding and then you have no contorl over the drone... I have exactly done this with an android custom autopilot and PIxhawk and Qgroundcontrol as well... Maybe create a video of that later.
Yup. just tried something. Now working on my own FlightController and video of that coming soon
it isn't necessary to use ardupilot? I think gps, pwm signals, sensors could be controlled trough raspberry pi. It would only need module for connection directly to pilot without internet. Am I right?
Waited alot for this
V4 is comming soon with custom linux os on pi zero. Ultra low latency and up to 1 hour flight time 😎 delta wing ✈️
Definitely perfect. Can't wait to see it.
Come on!
All the best,
It will definitely great
Upload it
Waiting eagerly !
Kuch samajh nahi aya,but desh age bad raha hai 😂😂😆😆😆
Why all these troubles, if there is a parrot disco and parrot bebop2 4g mod?
use Dronekit api it will be more impactful, no need to intercept RC inputs
hey bro ... its really good
and my question is i am a MEARN STATCH DEVELOPER... So i am strong in JavaScript so with my technology i will able to do this one ??????????? please response ME :)
Sure
I'm impressed bro keep it up 😎 I will also work like you after my jee 2024 🎉
Best of luck🎉
What is the flight time, battery capacity and weight of your drone? I have recently built a very similar quadcopter, but with live fpv and camera, it weights 2kg and flies only for 10 minutes with a 5000mah battery, any tips?
Use generator
Use lithium ions instead of lithium polymer. A good battery would be samsung 25R
It's a great project, please can you explain how did you connect the raspberry with drive controller ? Which ports did you use? In the raspberry and in the control drive?
means
@@DIYLIFEHACKER what are you meaning?
Will it work with nodemcu 8266?
i wanted to buy this , did you sell it?
Your idea is great. keep it up from kerala.
Sir if i made a drone using this transmitter and receiver and APM 2.8 flight controller, in Apm 2.8 have a mode RTL(Return to launch)
When the drone is goes out of range then the RTL mode will activate automatically, so if i make drone using this transmitter and receiver, and my drone will go out of range then will RTL mode activate automatically in apm 2.8?
Please reply.
Sir yesterday I checked by connecting to mission planner and try to arm my hexacopter containing APM 2.8 and in loiter there is an error occurred as pre-arm bad velocity and sometimes it shows High GPS HDPOS please help me regarding this...
TRY out door, your GPS signal is low
@@DIYLIFEHACKER Okk I will try today
waiting from 4 months
Ahh I've to say ,nice idea 💡.
Maybe 5G can slove the latency ?
Firebase python api was slow 🤥
❤ Very cool staff man.
Very great effort bro
I love it
I just started raspberry Pi and finding best IDE for that.
Can you help me?
use vs code
`while x == true:` can actually be replaced by `while x:`. Nice project, anyway!
And about latency: you should probaly set up server in local area. Check if your home router has public IP. If it does, than write a server yourself and start it on your pc. Latency should be reduced then.
Yup
sir google drive link is not work please can i have code of this project please sir
hey bro , i m working on a raspberry pi project , will you help me regarding this?
Hi again, I have started working on the drone again, but I see you have developed a lot! Congratulations brother :)
Tell me, is there any documentation of motor control etc? I see that you made your control app - as I had in mind :)
But I got bogged down how to use the gui to send commands to the flight controller....
U just need a socket tcp/udp to communicate abd send the roll yaw pith thr values
@@DIYLIFEHACKER yes, i know, i will use ssh tuneling, but i dont have idea, how looking comand to controlling value of throtle etc. thats why i asking about documentation
I have changed plan, and it will be plane, not drone, well case is easier.
@@DIYLIFEHACKER or just use servo.h for controll servo and motor?
@@stickylabhome7568 yes. But that freeze the code for the time period if u make changes in dutycycle
Sir I have one problem with my hexacopter. As I'm using APM 2.8 in loiter mode my drone is not arming and in altitude hold mode it is arming but after 50% throttle when I just increase it further the motors speedup like crazy and then when I down the throttle it's not slow down. It's slowing down when I fully down my throttle to zero. Please help me regarding this sir...
Please sir help me I'm waiting for your response...
It's natural.
If you push throttle above 50% then it will climb then after you return it to 50% it will hover there with the same altitude.
@@DIYLIFEHACKER and what about loiter mode my drone is not arming in loiter mode
@@DIYLIFEHACKER Please help me regarding my drone not arming in loiter mode
@@DIYLIFEHACKER No sir its not lifting just vibrating at a place and it's my first time.
check motor layout and propeller directions
Amazing 👍👍❤️❤️🔥🔥
I will surely make this
Bhai maine mamba f405 stack se drone banaya hai mai raspberry Pi connect karna chahata hu pr kr nahi pa raha because f405 radio telemetry ko support nahi karta maine MAVLink ke through try kiya pr betaflight ko MAVLink thik se support nahi karta, mainebhi raspberry Pi ko reciver ke sath connect karneka try kiya pn internet or koi documentation nahi hai ye karne keliye can you please share how you connected your reciver to your drone and then how did your connected your drone to the raspberry Pi ? It will help me a lot !!!! Btw ossum channel keep up the good work !!!! Love from India-Maharashtra
what I did isn't communicating with it's UART port it's more like a receiver(Indirect Control).
@@DIYLIFEHACKER can you please share the code or python script ?
@@DIYLIFEHACKER bro can you please share the pybasetesting.py script you showed in your video? it will help me a lot!!!!!
My guy your pretty good at what you're doing🤘, if only you could slow down your speech by 20% you'd be one of the greats.
excitement😋
I m using kk fight controller nd instead of mobile app i m using transmitter reciever of fly sky i6.
If will connect my rpi with flight controller nd thn with receiver;thn how should i manage the coding part ?
you have to use Android app
You bro! Can you please collaborate with me? I am trying to make an RC receiver that will be connected to the internet and thus can be given signals from anywhere in the world. I want to make an application through which the receiver can be controlled. Now, that receiver will have an electronic compass, a GPS module, and a camera, and will be connected to a GSM, to be able to communicate anywhere as well as calculate the current speed, location, and other parameters, and display them on the application. I want to program the receiver in such a way that it will be able to plan autonomous missions, by automatically calculating the distance between the points, and then give PWM signals, to the flight controller, when given instructions, just like the ones we can do with APM or pihawk. But since, the other cheap flight controller users such as kk2.1, or CC3D, or even DJI NAZA (I use it), do not get that opportunity to experience mission planning, I want a solution for them... If we can make it, and then successfully bring it into the market, via websites, it will be a breakthrough. Please reply...
Thank you...
Brother it's a good though
Have to done any autonomous things in any drone ?
Like in Pixhawk or apm with rpi 4 or other ?
Like human tracking or object detection and more ?
Can I get ur mail or how can I contact u plz ?
How fast was the communication speed between ur phone and raspberry pi(In seconds), Please ANSWER THIS
About 3 seconds. I used wrong methods in this version. Now better option available(Socket Commuication). I will upgrade it UDR v4
I had a problem on arming tha quadcopter in APM 2.8 board and I use tha fsct6b transmitter. Please help me
Bro enna problem bro konjam explain panningana na ennal mudinja help panna mudiyum
superb bro.( srilanka)
You deserve more ❤
Nice job bruhh I love your work
Bro i'm using mission planner android saftware, when i'm trying to do live compass calibration,the app get stuck and not responding,plz help me😭😭😭
use pc version,
@@DIYLIFEHACKER I don't have pc so I tried with android saftware
use qgroundcontrol
@@PolarBearLP can you send me the link of the app,it will very helpfull for me
@@anurag5874 yes sure
Bro, what are the other things we can we can make with Rasberry Pi like drones?
Any thing you want, that's the motivation behind building a flight controller.
Hello please can you make a video how to make our drone stable like yours and its calibration and what we should mate to be in this sensitivity please help when i put my drone on posistion hold it still moving even fi i put it in loiter mode i cant leave it in the same place any help!!!!
do autotune
You are doing great brother ❤
hello what is the firmware that you are using in ardupilot because iam trying to install the latest firmware but it gives me a problem any help iam using ardupilot 2.8
Use older one AC3.5.x
made a one hour video on it, it is the only video in this topic in india
Itne amazing ideas kaha se late ho aap?😅😜
Bss meri help krdijiye..mera drone to ud hi ni rha....unlimited range to baad ki baaat hai
Can this drone carry a mobile phn?
You are really awesome
Can I use raspberry pi 1b for this project? Thank you
Yes, you can
@@DIYLIFEHACKER thanks
Re upload programming code
Can you make a video how to make joystick app for drone with video display in background like this video you made I will be very grateful
I didn't get u
I mean can you design Android app to control the drone over wifi
Also provides live video streaming
if you remove the port forwarding method then it's wifi control
Bro source code.. pls
Bhai plzz make video on how to make a drone with unlimited range with internet with esp 8266. Bro do it in full details.
How yo do the port forwarding in the 4G dongle ?
Why do you still need an antenna on that drone?
Please make video on making drone using tarot flight controller
Ok I will try
Can I use raspberry Pi 4 for this project?
sure
@@DIYLIFEHACKER what is the benefits for joining your channel..!?
Awesome 👌🏻👍
Do the endurance check as well
Hey bro can I use the node mcu for controlling my drone using mobile
sure v2
How
Hi, Anish
Bro incredible ..
Bro where we can learn this .
Re upload the code
Can you make unlimited range telemetry module for ardupilot
That's already provided by Ardupilot. Mavlink with Raspberry pi
@@DIYLIFEHACKER can you make it with esp8266 push the trlemetry to blynk and we can get on laptop from blynk server?
Esp8266 has lot of delay to perform commands . It can't be used for drone . Next time try raspberry.
poora project kitne rupiye me bna bhai?
depends on the products, you choose
You are awesome.
Are you from Indonesia?
India
How long the battery will last?
7-10 minutes
Good work brother.
Genius!
8:33 you said that streaming was solved and edited the video onto the phone. wow
No, that is drone camera pointing at himself.
it was solved but for showing in the video I didn't shoot it again just edited the picture. This try was not perfect, but V4 is comming soon. That runs custom os on pi zero means faster with ultra low latency. also will test range upto few kilometres ☺️
@@DIYLIFEHACKER oh okay I See. I was also wondering how you want to maximize flight time. Did you already try high power Li-ion cells? Would be interesting to see :)
@@TiimedArts it's gonna be a delta wing ✈️ with flexible solar panels on top of it
@@DIYLIFEHACKER sounds amazing, when do you post the video?
i don't find the python code; which folder >?
What can we use instead of raspberry Pi
You can use a node mcu with gyro sensor it would be easier
Also an esp32 cam for videos
Bro please make long videos and explain basics for beginners please
Ok next time
Yor r great bro
how can we program it
And can raspberry pi pico will work
Pico doesn't have WiFi
How much mobile data does this use per hour?
data just for 240p 15FPS video stream. btw good point
thanks a lot bro
hey ......we r also trying to design a drone as a part of our academics and ur video is actually imformative if i hav any doubts can i mail u so tht u can help us out .
What is your age bro
But v must first hv knowledge of how to do coding for this right?
Do you sell drones.cost of this drone
We don't do it here 😜
how many time it's fly??
depends on bettery used
what is the benefits for joining your channel..!?
hello... give me reply bro
Just to support me.
Osum video 🥰🥰🥰🥰
my internal compass not work! what can i do?
check jumpers
I made my own FlightController : th-cam.com/video/OMMk6xxYXTc/w-d-xo.html
Awesome!
Bro 😍😍😍❤️❤️
Wow❤️
Solar energy is good in battery place
5g will solve latency issue
How do you code for resberi pi
What the idea
Bam bam video
hello, why you need to port forwarding the 4g router? the phone speak directly with firebase and the raspberry too right? why need direct access to 4g router (public ip)? if you want check this protocol www.maqiatto.com/