I recently had the same idea to save my photography drone from any accidents. It’s cheap, easy and enjoyable (for me at least!) This kid is very intelligent for his age!
Hey bro! I really appreciate what you are doing. You are using your skill and knowledge in the right way. I have seen some TH-camrs from india with lot of subscribers (I don't want to take thier channel name) who only make drone videos for the sake of fame and money. They even don't know the basics of building a drone. Keep the the good work up brother. You always have your support and blessings.
Very interesting! however, probably not the best to use ultra sound sensors for outdoor use. Would it be conceivable to exchange those senors for lidar and should any modifications be needed in code, etc?
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever.. But I'm not using pmw sbus So you tell how to make connect wiring in d-bus..
Bhai apm 2.8 ka input ka vcc and ground wire kaha connect karna he. I mean 2 say circuit ko power kaha see melega Plz answer I am in problem . Plz help
The code works with pwm i guess , as he said in the video will work with any pwm based input on FC u will have to struggle a little if the reciever is ppm
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever.. But I'm not using pmw sbus So you tell how to make connect wiring in d-bus..
I am glad to find your channel I gave from your video range less drone so I asked you if I I can't connect my drone to my satellite internet month plan
Hi Bro, I appreciate your work, but I am getting difficulty while arming my drone and when I look into mission planner I see that my RC is not connected to APM flight controller. can you help me with that?
I made this project too.... mine didn't work out. I think the concept shown in this video is exactly the same as the one I showed in my video. and even I can recognize my code. But still, I appreciate the effort.
Hi, i think i was your 1000th subscriber. Well first of all i want to say, you are so brilliant. Your videos of drone making are the best. I think you are the first to introduce obstacle avoidance in India. Well continue to give us your best. Thanks. One request that we want to see a drone with video transmission of several kilometers to a phone or tablet screen rather than fpv goggles. Can you do it? Because we feel just flying drones around is kids play. People want to explore beautiful nature around with their drone. So please make one. Thanks
i soldered apm power module to the f450 board cutting the female xt60 port. what will happen ? and please tell me how to connect raspberry pi with apm 2.8 ?
sir i made a drone using kk2.1.5 , now i am planning to use other flight controller . with which flight controller should i start with apm2.8 or pixhawk can you please guide me bhai
No, in my system it avoides indirectly controlling flightcontroller. If still i want then surely I have to use apm 2.8's internal obstacle avoidance feature. Yes, it offers.......
No bro open cv will struggle on pi4 or 3 , u need nvidia tx1 basically a nvidia jetson nano, u need very fast reaction time therefore a gpu , and yes 1 camera is not enough, u need two camera to trangulate the depth of the computer vision for obstracle distance detection and avoidence ,cameras must be in synchronisation that is a global shutter,
Hey bro can u tell where can I learn to build the drone , i am thinking we are using a market flight controller instead of creating our own MPC or pid flight controller
@@DIYLIFEHACKER i want to achieve obstacle avoidance , but don't know how will i do that , i can write code for it but don't know anything about how will my code interact with flight controller
@@DIYLIFEHACKER in my mission planner software it is not showing options like RTL or Land or any other options in battery fail safe...just it is showing empty bro...that's why am asking
Somebody, give this guy a scholarship!!!
A joung ver. of Elon Musk ? :)))
I recently had the same idea to save my photography drone from any accidents. It’s cheap, easy and enjoyable (for me at least!) This kid is very intelligent for his age!
Hey bro!
I really appreciate what you are doing. You are using your skill and knowledge in the right way. I have seen some TH-camrs from india with lot of subscribers (I don't want to take thier channel name) who only make drone videos for the sake of fame and money. They even don't know the basics of building a drone. Keep the the good work up brother. You always have your support and blessings.
This dude deserves more likes👍
Very interesting! however, probably not the best to use ultra sound sensors for outdoor use. Would it be conceivable to exchange those senors for lidar and should any modifications be needed in code, etc?
Real hero of Drone...jo ki Minded hain ...baki drone TH-camrs to copy kerte hain....bus....
GREAT WORK .........BIG THINK BUILT SMARTLY & SIMPLY
👏👏👏👏 sabash.Really somebody give him a scolarship.
I was waiting for this video from last 1 month.. really nice video bro.. keep it up💐💐
Only video in youtube on the topic. Kudos
Bro u deserves a drone CEO of a company
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever..
But I'm not using pmw sbus
So you tell how to make connect wiring in d-bus..
The content is great, waiting for the openCV project. 👍👍
Sure
Brilliant work kid!
Hey bro ..... I very like it ... I want to put obstacle avoidance to my GoPro karma drone ... Can you help me?
Well done
From🇰🇼Kuwait
Hello Can I use same code if I use Pixhawk FC instead of APM controller?
this is actual smartness!
Video editing is awesome.👍
😎 yes i still don't know his editing secret tool😂,
Brro, Apm 2.8 not arming. Which year softwer use. Pleas softwear link.
Proud of you
does it works with raspberry pi too?
Excellent 👍🏻
Very good vai..
I am pretty impressed with your ideas and creativity
Keep it up
Expected more from you 😉
Bhai apm 2.8 ka input ka vcc and
ground wire kaha connect karna he. I mean 2 say circuit ko power kaha see melega
Plz answer I am in problem . Plz help
Power it from Esc BEC
@@DIYLIFEHACKER esc ke 3 pin wire Bec he kya Jo flight controller me lagta he . Plz reply
good job
it's work with controller MAMBA f405 MK2 ??
The code works with pwm i guess , as he said in the video will work with any pwm based input on FC u will have to struggle a little if the reciever is ppm
please if I need to add smock detector to this drone what I need .please help thank you
Well done , it helped me a lot thankyou so much
Really iam inspired from you
Bro I'm using Naza v1 flightcontroller and I'm using D-bus reciever connection between FC to reciever..
But I'm not using pmw sbus
So you tell how to make connect wiring in d-bus..
Let me check
@@DIYLIFEHACKER bro can u find any solution for this..?
Nice
Video
Hii. I use radiolink at 10 ii transmitter and receiver so is the wiring diagram same?
Where did you place down sensors
Really great job bro for all drone developers keep it up bro
great job brother
Hey just want to ask is the code in the description is the edited one ?
unltrasonic sensor is used for small distance but for a long distance we have to use ladar then how we code for lader sirr...
depends on the module
???
in the video tou have done with pwm receiver.. but i have pixhawk and a ppm receiver how to do this on a PPM receiver
I am glad to find your channel I gave from your video range less drone so I asked you if I I can't connect my drone to my satellite internet month plan
Wait a little.
Just my new video Unlimited Drone Range v2 comming soon
Great work! ,waiting for open CV
Can you please help after putting all sensors and programming drone gets ARM only when it is connected to mission planner 🙏🙏
Very nice
Waiting for next part of this video. You really worked hard for this project,and keep it up.
does this techniq works with pixhauk? beacase it has onpy one input chanal.
what if the receiver I use only uses 4ch? So where should I put ch5 and ch6?
I really beg you to answer my question this time. please ....
please.....
no need, just a bit code difference.
put condition to enabke obstacle avoidance system only when downward sensor defecting height above 1 meter.
Well Done
Hi Bro, I appreciate your work, but I am getting difficulty while arming my drone and when I look into mission planner I see that my RC is not connected to APM flight controller. can you help me with that?
what if I don't use the receiver, but I use a bluetooth module
how.
configuration?
is this compatible with dji naza FC ?
Nice work but does this work on autopilot mode.
no
which flight controller is being used by you
I used Apm 2.8 but u can use what u have
hi i wan to ask , from flight controller to arduino, connect via input or output of flight controller ?
Inspirational video
Can we use the same algorithm for TOF(LiDAR) sensor? For obstacle detecting?
It was just a basic like front back right left... More complex and good performing are available check on google.
Your Code seems to have been picked up from instructables ,did you yourself make the code ?
These are my own codes.
someone uploaded I didn't www.instructables.com/Obstacle-Avoidance-System-for-Pixhawk-APM-KK-DJI-N/
You are genius but I not understand English I want to this type video Hindi please ❤️👍🙏
Ha🔥👍
Okay sure
I made this project too.... mine didn't work out. I think the concept shown in this video is exactly the same as the one I showed in my video. and even I can recognize my code. But still, I appreciate the effort.
Can we add this obstacles avoiding system for DJI naza m lite flight controller pl tell bro
Hi, i think i was your 1000th subscriber. Well first of all i want to say, you are so brilliant. Your videos of drone making are the best. I think you are the first to introduce obstacle avoidance in India. Well continue to give us your best. Thanks. One request that we want to see a drone with video transmission of several kilometers to a phone or tablet screen rather than fpv goggles. Can you do it? Because we feel just flying drones around is kids play. People want to explore beautiful nature around with their drone. So please make one. Thanks
Yes, I can.
My unlimited Drone Range Series...V2 coming soon if possible then I will add this feature. Otherwise in V3
@@DIYLIFEHACKER superb👍 Thanks
How can I do that with s-bus receiver
Sofrwear saport which laptop, window 7orwindow10
Can you please help after all connection my reciver and Arduino is not getting on please help . My reciver is ppm
i soldered apm power module to the f450 board cutting the female xt60 port. what will happen ?
and please tell me how to connect raspberry pi with apm 2.8 ?
Check out "Navio 2"
Hi，we are doing similar things and I used same system for a test. But why my drone responses too late to fly normally？ hope for your instruction！
1. Use millis() function instead of delay.
2. Use interrupt to read PWM signals
I was waiting for you, Full built video need.
Diagram and codes are in the description .I think Soldering and Pasting will be so boring
@@DIYLIFEHACKER bro I am a beginner, I do not understand digram so well. Thank you for reply
bro ! sirf landing k liye , niche ki taraf ek he sensor use karna hoga toh code mai kya changes honge ? mera drone thik se land nhi kar pata
the code includes feature of obstacle avoiding under the drone.
But according to your need it can't provide Alt hold any kind of feedback or Else
sir i made a drone using kk2.1.5 , now i am planning to use other flight controller . with which flight controller should i start with apm2.8 or pixhawk can you please guide me bhai
Bhai the drone is not calibrating bro what to do esc callibration
Search on google or youtube you will found a lot
Hi. Your project is very good. May I find out about how you connected flight control to Arduino? I have a problem there. thank you
Through the receiver inputs
@@DIYLIFEHACKER in pixhauk we have only one receiver input. Is it possible with pixhauk?
Please provide us the sbus code and wiring diagram too.
Can we set mission panner to autonomous hover over wave points set along with object avoidance
No, in my system it avoides indirectly controlling flightcontroller.
If still i want then surely I have to use apm 2.8's internal obstacle avoidance feature.
Yes, it offers.......
ok but what about the rtl mode is it work
What if we using sharp IR sensors ? Can u make the video ?
No bro open cv will struggle on pi4 or 3 , u need nvidia tx1 basically a nvidia jetson nano, u need very fast reaction time therefore a gpu , and yes 1 camera is not enough, u need two camera to trangulate the depth of the computer vision for obstracle distance detection and avoidence ,cameras must be in synchronisation that is a global shutter,
Ok
Youre the best.me from Bali
How to used in auxiliary channel in rgb led
PWM from AUX(Ch 6) is mapped through arduino then the RGB is commanded.
Bro can you do this same setup for s bus /speedybee flight controller
Can we use optical flow to apm 2.8 for indoor hovering of drone
yes
Please tell me which one I have buy
Currently iam myself not having jetson, so finding ways out with pi3 and monocular cv ,
Can I do it with S-bus receiver
yes
Hey bro can u tell where can I learn to build the drone , i am thinking we are using a market flight controller instead of creating our own MPC or pid flight controller
Finally what do you want?
@@DIYLIFEHACKER i want to achieve obstacle avoidance , but don't know how will i do that , i can write code for it but don't know anything about how will my code interact with flight controller
Just pwm outputs to mimic a rc receiver
Waiting for open CV! Amazing job man! Proud of you
It's impossible to get parts through online stores to make project but sure I will make it
@@DIYLIFEHACKER Sure, And bro how did you power the Ultra sonic sensord and Arduino nano? Do you have whatsapp numer?
Make a video on Dji naza v2
Obstracle aviodances.. used 6ultra.sansure with Arduino nano..
U can also use MaxBotix Obstacle Avoidance. Give it a Try.
MaxBotix
What's that??
@@DIYLIFEHACKER Powerful Ultrasonic Sensor.
Expensive
@@sala7311 worth the extra penny.
How to get low latency in ultrasonic sensor for dynamic obstacle avoidance
That's difficult. If you measure 1 m distance you have to wait 2 milliseconds.
Your creative level is extraordinary 👍🏻 keep it brother !!
Bro how your throttle is hold in center please tell me
DIY mechanism using Spring
Super
You are genius but I not understand English I want to this type video Hindi please ❤️🔥🔥👍🎉🎉🎉🎉
Ok 😊
Awesome.. love you.... Brow.
lease provide us the sbus code and wiring diagram too.
How does your drone get altitude hold please make a video
love u bro really u must be awarded with something also more subsss
Can you teach me the connections from flight controller to receiver to adruino to flight controller?
Bro the code is not working bro..
Error says " return code is not zero"
So, what I to do? Plz reply bro..
Bro how to know battery percentage of drone from ground...to avoid battery failsafe
That's why failsafe but why you wanna disable it ?
@@DIYLIFEHACKER in my mission planner software it is not showing options like RTL or Land or any other options in battery fail safe...just it is showing empty bro...that's why am asking
Great bro 🔥
Put on extended arms that stick out past the arms
Yes, then the sonar will offer more sensing range
I wait for part 2
Where did you learn IOT coding? What are the resources?