Brother, you did this video just for me. Thanks, I should have looked here before losing my ball bearing LOL!!! After tearing up the living room, it was recovered. But their directions are terrible.
After undoing 10mm nut keep pressure on the black plastic piece and push the end of the lock out. Fit new lock in (Lug uppermost) and fit 10mm nut. No drama with ball bearing. Thanks for video.
Hi there, I'm doing fine thanks. Yes I pop up from time to time on TH-cam 🤣🤣 Take care and ride safe Hartley. I have subscribe to your channel too. let's fly 🚀🚀
Thanks for the detailed video. I didnt need to replace the lock but it was getting hard to turn the key. So I put it apart and put some oil in the famous ball bearing 😁 It works perfectly now! Thanks!😎
Thanks for leaving your comment, appreciated much. When I returned from my road trip to Nordkap I had to take it apart again and clean it as road dirt does get inside 😢
Thanks very much for the video, very helpful. Unfortunately the idiot at this end didn’t learn from watching you drop your ball bearing and did exactly the same thing. Also managed to find it.
Nice vlog. I was looking for something that would give an indication on the level of difficulty involved, and, to be honest, once you had the two screws out and the latch assembly out, I paused, grabbed mine and did the job. Figured there'd be a ball-bearing on a spring, so I didn't get surprised like you did. Thanks for leading the way in!
Thanks, when I picked up my new Ducati they gave me a key barrel to match my key, now I just need to buy the Givi box and change the barrel. The Ducati box is expensive but made by Givi, equivalent box is so much cheaper.
@@Crosstourertony Nothing yet. I think I might drill out the lock of I can do it without damaging the case. So far the company I bought it from hasn't been too helpful.
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
Three years later for me. Watching that bearing and spring reveal tbemselves kept me from letting the same thing happen. Thanks man!!
Never too late, glad the video helped you 👍
2 years later and still helping out. Just changed mine. Thanks. 👍
Glad it helped 👍
Brother, you did this video just for me. Thanks, I should have looked here before losing my ball bearing LOL!!! After tearing up the living room, it was recovered. But their directions are terrible.
Happy you managed to find your ball 😀 thanks foreaving your comment 👍
Yes, thanks as well from Germany! - This video helped me out. Quick andy easy to understand. - Thank you!!! 😀
Hi thanks for leaving your comment. Im glad the film has made your life a little easier. Ride safe ✌️
After undoing 10mm nut keep pressure on the black plastic piece and push the end of the lock out. Fit new lock in (Lug uppermost) and fit 10mm nut. No drama with ball bearing. Thanks for video.
Exactly what I was thinking, there doesn't seem to be a need to remove that black plastic part at all.
useful, I'm about to switch out my lock too - thanks for posting
Hi thanks for your kind words, glad my video was of help. Ride safe and Ride your Dream
Thank you, glad you grabbed your ball
😂😂
Searched for how to change the Givi lock and look who popped up!! Nice one Tony, hope youre keeping well.
Hi there, I'm doing fine thanks. Yes I pop up from time to time on TH-cam 🤣🤣
Take care and ride safe Hartley. I have subscribe to your channel too. let's fly 🚀🚀
Thanks for the detailed video.
I didnt need to replace the lock but it was getting hard to turn the key.
So I put it apart and put some oil in the famous ball bearing 😁
It works perfectly now!
Thanks!😎
Thanks for leaving your comment, appreciated much. When I returned from my road trip to Nordkap I had to take it apart again and clean it as road dirt does get inside 😢
Thanks very much for the video, very helpful. Unfortunately the idiot at this end didn’t learn from watching you drop your ball bearing and did exactly the same thing. Also managed to find it.
Thanks for leaving your comment. You must pay attention to teacher. Could do better anyway glad the video helped you and you found your bearing 👍😁
Nice vlog. I was looking for something that would give an indication on the level of difficulty involved, and, to be honest, once you had the two screws out and the latch assembly out, I paused, grabbed mine and did the job. Figured there'd be a ball-bearing on a spring, so I didn't get surprised like you did. Thanks for leading the way in!
Lucky you, you learnt by my mistake 😅
Spot on mate the nut came off the barrel, looking at it was a bit tricky, but the video made it simple 👌 👍
Thank you much for the video!!! I was able to change my lock on the same top case within 5 minutes with your help.
Thank you for taking time watching and commenting. Happy my video helped you 👍
Well done Tony! You have been lucky to find the ball bearing ;-)!
That I was Gilles 😅
Nice Video with valuable information.
Great help!
Thank you.
👍
Thanks for your comment. Happy that the video was helpfull
Thanks, when I picked up my new Ducati they gave me a key barrel to match my key, now I just need to buy the Givi box and change the barrel. The Ducati box is expensive but made by Givi, equivalent box is so much cheaper.
Glad my video was of some help Ian 👍
Great, glad it made your life easier😂 thanks for watching and leaving your comment 👍
Thank you very much!!! it was very useful. I was able to solve the problem!!!
Thanks for watching the video and leaving your comment. I'm glad you were able to solve your problem.
great simple vid
Thanks for your comment, as you can see it is a simple job 👍
Thanks for the video 👍
Trying to think of videos to make 🤔 whilst locked in at home 😂
@@Crosstourertony 😂
Aaaand you lost me at 0:55. EM-MOTO sent me mine with the key locked in the box.
Shit how have you opened it? Or did you return it
@@Crosstourertony Nothing yet. I think I might drill out the lock of I can do it without damaging the case. So far the company I bought it from hasn't been too helpful.
love the number plate :-)
Easy 😂
nice thank you !
You are more than welcome. Glad my video helped you. See you soon
The keys with these Givi locks are absolute garbage. They crumble after a short period of time. I've had two go the same way in a year.
Thank you for leaving your comment so far my keys have stayed good, 👍