I remember the FP9s that the Algoma Central had for and all-too-short period of time. I'll never forget what a quartet of 567s in the middle of the Agawa Canyon sounds like!
Very rare engines, even back then! The only other SD28s I'm aware of belonged to the Illinois Central and they only rostered 2 of them. Great video as always!
One of the sounds of FREEDOM, I love it. I Like it also because there is no music with the video, just the way a video should be. Thank you for such a treat....
To quote the catcher from The Sandlot: "You're killing me here, Smalls!" Just three more reasons why can never get excited over boring widecab GEVOs. Can't beat the sound of a 567 in notch 8!
Growing up around the time when the 645 was popular, it's great to hear the difference between the 567 and 645's. They sound like they could grab one more notch in this video! Definitely a treat to see the older power recorded; thanks again!
If I remember correctly, the caboose was wrecked in a collision a couple days later and was destroyed, along with one of the SD28's. Thanks for watching.
love the 567 sound. growing up along the ohio river, i heard trains and towboats both powered by 567s and 645s and Fairbanks Morse. Soothing sounds to grow up to especially at night when in bed.
virginian 2-10-10-2 To this day, though the nearest line is miles away, I can still hear the rumbling of engines and their horns when I wake up at 4 in the morning to go back to sleep. I bet that the locomotives I was hearing had 645s (:
I was wrong about this. I have never heard of an SD 28 before this video. They look like SD 38s but have 547 Prime movers. Evidently they were very rare
@@mm-gl7sz actually they are just a non-turbo version of the sd35, not sd38. The prime mover is a 567, not 547 (no such thing as a 547). the last engine is an sd18, not a geep. :) edit: and yes, sd28's were pretty rare, with only 6 built
I'm not hip at which loco is labeled which,or which loco is actually of certain type .....I'm merely thankful that you have kept& logged marvelous record of SDs and GPs doing their Best ... Thank you......
DieselPowerFinland yes your right the new ones are way to quiet the gevos have a good sound whin throttled up but its the new ET44S that are way to quiet):
brings back my best train memory when I viewed two PRR F units( 9823 & 9560 )howling in a snowstorm with 38 loaded hoppers and another 4 EMD's cut in before the cab pushing hard at Revloc,Pa.in 1963.Train came up from Nantyglo to the summit in Ebensburg.Heard it for nearly half an hour winding around the mountains.Sadly tracks are now a bike path but what I saw 54 years ago is etched in my brain forever.The picture I took is in Al Staffers book"Penny power 2".
These were the days when locomotives could show us how powerful and determined they were to get the job done. Today's power takes the excitement out of the struggle.
Sweet music to my ears! There's nothing better than a herd of 567's or 645's going by you in notch 8 with a heavy train! Whether they are turbo or na it's way better than the quiet stuff they are making today. Namely gevos
"You don't holler whoa, baby, that old muuule's pullin' hard"-Jimmy Reed, "Down In Mississippi" Bit of whimsy, I suppose. I kept thinking that lyric while I was enjoying the rhythm of might.
Nice video, I love the sound of this engine. Here in Brazil The company MRS has some models of the SD18 still in operation. Already this model of SD28, is identical to the SD38 that the MRS has here with the engine 16-645E aspirated (without turbo). When they were acquired they were to pull the iron ore trains.
Wow. The only thing that would make this better is if they were double headed steamers! Don't get me wrong, I LOVE the sound of the 567! When I sleep over at my grandparent's house, I am lulled to sleep by the sound of 567's working in the nearby railyard.
Kids these days don't know this sound. Luckily, I was born shortly before all that wide-cab silenced stuff was popular. I love this sound!! Thank you for sharing these videos, keep up the amazing shots!
My initial fans was when SD40-2 was hot&new....realizing so many generations of locos have come thru to crawl up these rails since then is really a wakeup call as to how really old I am & how long I've been appreciating this amazing industry .....I'd deeply admire the industry if they'd treat workers fairly, beside being in awe of the tonnage accomplished day to day toward great economic power of USA. Anyway, thanks for your vids. I'll watch more.
Jake, we have lost so much over the years. I remember my very young years, my dad and grandpap would take me trackside in northern NJ. I remember the end of Erie steam on locals coming through the station, and vacationing at the Jersey shore, the Pennsy K4's up to 1957, then the big Sharks and PA's, the CNJ double ender Baldwins. Seen so many models over the years. I don't even bother going out anymore. Everything is boring, and looks the same. Train lengths have doubled, one unit on the front, one in the middle, just plain boring. My front porch is 23 feet from the CSX, ex-B&O mainline, so I can watch right from the window. Sometimes even then! I don't even turn my head, unless I hear a strange horn. I host the Railstream LLC camera here at the house. Its Railstreams "Hog Pen" camera, named after the signal location a 100' down from me. Some crews called it, "Jacks Hog Pen" so I knew they were coming. LOL th-cam.com/video/D7TziFfVhlU/w-d-xo.html
In 1969 my family moved into a new house about 3/4 mile from the Missouri Pacific line in Austin, Texas. The line has a fairly steep grade from the Colorado River, downtown, for about 5-5.5 miles north bound. Nowadays the line is in the middle of what Austinites call MoPac Blvd., which is actually a freeway-grade highway with four lanes of traffic in each direction. Before MoPac was built I could hear all the 567 units laboring upgrade, particularly at night, when all the city's other "white noise" producers were idle. Back then MoPac's philosophy seemed to be two lash together about 100 freight cars, add six or seven 567's, and haul ass. F3s, F7s, GP-7s and 9s, GP-18's would drag theirs trains northbound and their exhaust and rumble would be pronounced through our neighborhood. Perhaps lying in bed listening to the diesels slugging it out upgrade is when I developed the notion that for a town or city to have promise that both a river and railroad were necessary before a kid could enjoy the mystery posed by horizons: what's downstream or what is St. Louis, MO like. All I knew for sure was that St. Louis was 941 miles north of Austin, TX, and the Texas Eagle went north every day. Thanks for a great video and fond recollection!
Man, that's some serious pulling power and a pretty mean exhaust note as a bonus. I would like to put one of those diesels in my truck then I could get to work on time.
Still the best EMD soundtrack, the non turbo 567, remember them sounding like this on railroad lines in Belgium, where on the grades they would use 2 or 3 loco's on iron ore and steel trains, and the good old 567 would take the abuse of pulling a train uphill notch 8 at 15mph for ever.
Our family moved to a new house in 1969. It stood about 4 long blocks from MoPac's 200-foot-wide right-of-way. Back then MoPac ran long trains behind F7s, GP 18 (riding on trucks from scrapped Alco units - mostly PAs), GP7s, and GP9s. An expressway was built on either side of the MoPac tracks and the expressway is known locally as "MoPac Blvd". Northbound MoPacs trains had a steep grade to fight all the way from the Colorado River bottoms to Snead siding, a distance of roughly 6 miles. At night I would lie in bed and listen to the music produced by the 567s traveling upgrade. Since MoPac Blvd was completed all one can hear is the white noise of traffic.
I miss the sound of 567s. When I was growing up FEC still had some high hood GP9s on their roster for local jobs and that's what they sounded like at full chat.
The sound of these EMD locomotives reminds me of the Irish A class Metropolitan Vickers locomotives after these were rebuilt with EMD engines. I recall how on a sultry summer day the sound of such an engine would carry on the air.
Makes me really miss pulling the 2.7% grade out of Peace River Alberta with a quadruple set of well worn CN SD40-2's. On a good day or night when they were all actually loading properly (which was only about half of the time), they pulled like a bastard. Whatta rush.
Very nice. So that's the old Chicago North Shore Line railroad up by Lake Superior. I didn't know it went that far north. I thought it would have been more like 90 miles from Chicago like the Chicago South Shore & South Bend Railroad.
It has CottonBelt! I'll be posting a video in about an hour of what's been eating up all my time recently. Car show season is on me, and I had lots to do to get ready for it. There was a few guys wanted to know if I was OK, or if something happened to me. I'm alive and kickin! Thanks for your support, and watching...
I grew up on the Mississippi river, blessed to be between the Burlington Route, C&NW, Milwaukee Road, and TowBoats, The C&NW ran Alcos, the rest had EMDs, what a childhood! My question, didn't C&NW run these in high hood units out of the Messabi range in the 60s?
I've been making runs up the western shore of Lake Superior for more than a year now, and pass right through Beaver Bay. I didn't realize until now that I have been crossing paths where these 567's once raged. Does this track cross Rt 61?
The sound of work being done, money being made, jobs being had!
For sure michigandon! Thanks for watching...
Yeah, I would say so. Looks like a load of either crushed stone or iron ore.
At least the ballast dosn't also come from China! Yet!
From the days of when we were still a country and a superpower.
@@Galaxy2517 We had a choice to be a country or superpower. We chose trump so we are neither.
I can close my eyes and I'm back in 1983 listening to two F7s of the Seattle and North Coast approaching the crossing next to my childhood house.
I remember the FP9s that the Algoma Central had for and all-too-short period of time. I'll never forget what a quartet of 567s in the middle of the Agawa Canyon sounds like!
Brings back memories of standing in the same spot and watching the big mallets pulling up that hill when I was a youngin'.
Very rare engines, even back then! The only other SD28s I'm aware of belonged to the Illinois Central and they only rostered 2 of them. Great video as always!
I've ran a few nothing can compare they are pulling beasts EMD for the win
This is the best train video on TH-cam. That non-turbocharge 567 sound is absolutely perfect.
Glad you enjoyed it. They sure did sound fantastic. Thanks for watching...
That the best diesel engine I can hear. Nothing like an old 567. Beautifull video!! Thanks
Yes, a bit like a cranked-up steam engine?
Has a little soot, too. (It’s a sho’-nuff *Train,* all right.)
One of the sounds of FREEDOM, I love it. I Like it also because there is no music with the video, just the way a video should be. Thank you for such a treat....
I know I'm in good company when I'm on a page with like -minded souls just watching trains go by.
AMEN ON THAT! Nothing like it. Sheer brute power against the eliments. Thanks for watching.
it's good to tune out the rest of an annoying word with a purposeful, yet relaxing sound.
@@torquetrain8963 truer words have never been spoken.
Right on, Bro!
Always love seing EMD's putting in work. Even if it is from years past.
To quote the catcher from The Sandlot: "You're killing me here, Smalls!"
Just three more reasons why can never get excited over boring widecab GEVOs. Can't beat the sound of a 567 in notch 8!
Growing up around the time when the 645 was popular, it's great to hear the difference between the 567 and 645's. They sound like they could grab one more notch in this video! Definitely a treat to see the older power recorded; thanks again!
Awesome catch. Out here on the plains, we very seldom hear these things under power like that. Thanks for sharing.
Thanks for the memories. I grew up in Duluth and you would hear this sound all the time.
And a caboose! Hard to beat!
If I remember correctly, the caboose was wrecked in a collision a couple days later and was destroyed, along with one of the SD28's. Thanks for watching.
Now that's railroading.... thanks for what you do!
music to my ears, I could enjoy a peace nights sleeping listening to those wonderful engines. Thank you
The rhythmic chant of those EMD 567's !
love the 567 sound. growing up along the ohio river, i heard trains and towboats both powered by 567s and 645s and Fairbanks Morse. Soothing sounds to grow up to especially at night when in bed.
virginian 2-10-10-2 To this day, though the nearest line is miles away, I can still hear the rumbling of engines and their horns when I wake up at 4 in the morning to go back to sleep.
I bet that the locomotives I was hearing had 645s (:
The first 2 nines are SD 38s which are 645s. The last engine is the only 547 in the bunch a rebuilt gp7 or 9
@@mm-gl7sz what
I was wrong about this. I have never heard of an SD 28 before this video. They look like SD 38s but have 547 Prime movers. Evidently they were very rare
@@mm-gl7sz actually they are just a non-turbo version of the sd35, not sd38. The prime mover is a 567, not 547 (no such thing as a 547). the last engine is an sd18, not a geep. :)
edit: and yes, sd28's were pretty rare, with only 6 built
when people say" something sounds like a freight train locomotive " they dont know what the heck they are talking about. lovely.
For sure. Glad you enjoyed it. Thanks for watching...
I'm not hip at which loco is labeled which,or which loco is actually of certain type .....I'm merely thankful that you have kept& logged marvelous record of SDs and GPs doing their Best ...
Thank you......
Great job! Super audio, compelling video, just a very well done piece. Thank you for this.
Very nice and loud diesel sound. Much better than new quiet and boring engines...
Ujjn n nn. Croatian
DieselPowerFinland yes your right the new ones are way to quiet the gevos have a good sound whin throttled up but its the new ET44S that are way to quiet):
The sound of MUSCLE and RELAIBILITY ..... today locos ... nice but like you said ... NO SOUL. The most you can get is some turbo whine ....
Better than the GE toasters too.
You are SOOO right! Gotta love all that power! Thanks for watching...
What a great video!! I was sleepy when I started it but I was cranked up at the end!
brings back my best train memory when I viewed two PRR F units( 9823 & 9560 )howling in a snowstorm with 38 loaded hoppers and another 4 EMD's cut in before the cab pushing hard at Revloc,Pa.in 1963.Train came up from Nantyglo to the summit in Ebensburg.Heard it for nearly half an hour winding around the mountains.Sadly tracks are now a bike path but what I saw 54 years ago is etched in my brain forever.The picture I took is in Al Staffers book"Penny power 2".
A caboose!! What a bonus surprise.
I listened to it with the headphones turned to 11!!!! Just Awsome!!!
Jack ! And you brought EMD 567's. Glad to hear from you again.
These were the days when locomotives could show us how powerful and determined they were to get the job done. Today's power takes the excitement out of the struggle.
Sweet music to my ears! There's nothing better than a herd of 567's or 645's going by you in notch 8 with a heavy train! Whether they are turbo or na it's way better than the quiet stuff they are making today. Namely gevos
Roots-blown 567's... And the caboose was icing on the cake!!
Emd is the Best locomotives of all ages
SD40M-2s rocks! and screw SD50s
nice that you wrote about where this was taking place...I first thought this was the LS&I near Marquette MI. thanks
"You don't holler whoa, baby, that old muuule's pullin' hard"-Jimmy Reed, "Down In Mississippi"
Bit of whimsy, I suppose. I kept thinking that lyric while I was enjoying the rhythm of might.
Spend several nights a year at Silver Bay Marina. Just love the gentle rocking of the boat listening to them fight the hill.
Nice video, I love the sound of this engine. Here in Brazil The company MRS has some models of the SD18 still in operation. Already this model of SD28, is identical to the SD38 that the MRS has here with the engine 16-645E aspirated (without turbo). When they were acquired they were to pull the iron ore trains.
That is a beautiful sound !! Nothing compares to the roaring chant of EMD 567 V16s in notch 8.
I feel the spirit
Wow. The only thing that would make this better is if they were double headed steamers! Don't get me wrong, I LOVE the sound of the 567! When I sleep over at my grandparent's house, I am lulled to sleep by the sound of 567's working in the nearby railyard.
Awesome EMD sound!! Fantastic video!
One of the sd 28's was given new life at the Cumberland mine rail way in Pennsylvania
She hauls coal now
They had a sound of their own Alec! It was fantastic. Thanks for watching...
That sound in notch 8 is incomparable....Powwr on the rails👍🖒
Wish. I. Still. Worked. 4. Emd.
look at those old men proving they can still play ball !
Those are about as old as my dad!
Kids these days don't know this sound. Luckily, I was born shortly before all that wide-cab silenced stuff was popular. I love this sound!! Thank you for sharing these videos, keep up the amazing shots!
Unbelievable how hard those trains are working
They're LOCOMOTIVES !! Not trains... 🤨
The 567: One of the sweetest sounds ever made.
No doubt about! Thanks for watching...
Non turbocharged 645s at notch 8 are pretty good too.
Thanks airing the outstanding vid.Bliss
Very AWESOME SOUNDING of Beast.............
Ga- Damn!!!!!!!! This video is great!!!!!
Agonizingly wonderful !!!
mbwolf
The best diesel loco sound on the planet! Bomb proof and built like tanks, the good old 567.
Thanks Dragonriver! I'm still allive! LOL I'll be posting a video soon of what was eating up my time. Thanks bud, and thanks for watching...
SD28's & SD18's!! Rare birds!
My initial fans was when SD40-2 was hot&new....realizing so many generations of locos have come thru to crawl up these rails since then is really a wakeup call as to how really old I am & how long I've been appreciating this amazing industry .....I'd deeply admire the industry if they'd treat workers fairly, beside being in awe of the tonnage accomplished day to day toward great economic power of USA.
Anyway, thanks for your vids. I'll watch more.
Jake, we have lost so much over the years. I remember my very young years, my dad and grandpap would take me trackside in northern NJ. I remember the end of Erie steam on locals coming through the station, and vacationing at the Jersey shore, the Pennsy K4's up to 1957, then the big Sharks and PA's, the CNJ double ender Baldwins. Seen so many models over the years. I don't even bother going out anymore. Everything is boring, and looks the same. Train lengths have doubled, one unit on the front, one in the middle, just plain boring. My front porch is 23 feet from the CSX, ex-B&O mainline, so I can watch right from the window. Sometimes even then! I don't even turn my head, unless I hear a strange horn. I host the Railstream LLC camera here at the house. Its Railstreams "Hog Pen" camera, named after the signal location a 100' down from me. Some crews called it, "Jacks Hog Pen" so I knew they were coming. LOL
th-cam.com/video/D7TziFfVhlU/w-d-xo.html
In 1969 my family moved into a new house about 3/4 mile from the Missouri Pacific line in Austin, Texas. The line has a fairly steep grade from the Colorado River, downtown, for about 5-5.5 miles north bound. Nowadays the line is in the middle of what Austinites call MoPac Blvd., which is actually a freeway-grade highway with four lanes of traffic in each direction. Before MoPac was built I could hear all the 567 units laboring upgrade, particularly at night, when all the city's other "white noise" producers were idle. Back then MoPac's philosophy seemed to be two lash together about 100 freight cars, add six or seven 567's, and haul ass. F3s, F7s, GP-7s and 9s, GP-18's would drag theirs trains northbound and their exhaust and rumble would be pronounced through our neighborhood. Perhaps lying in bed listening to the diesels slugging it out upgrade is when I developed the notion that for a town or city to have promise that both a river and railroad were necessary before a kid could enjoy the mystery posed by horizons: what's downstream or what is St. Louis, MO like. All I knew for sure was that St. Louis was 941 miles north of Austin, TX, and the Texas Eagle went north every day.
Thanks for a great video and fond recollection!
hard to belive that the locos are at full throttle . thanks for the vistas long gone .
This is the best damn train video on youtube. Love that sound!
I love 567 prime movers like no one else.
+FECSD70M2 PRODUCTIONS
I think I may be right there with 'ya!!! That, friends & neighbors, is what I call music.
LUVEMDPOWER YEP.
Man, that's some serious pulling power and a pretty mean exhaust note as a bonus. I would like to put one of those diesels in my truck then I could get to work on time.
That would be pretty neat, making that much HP. Thanks for watching...
the diesel engine itself is longer than your entire truck.
Fantástico!!!! É muito peso, mas as EMDs conseguem!
wow . the clagg and thrash :) even rarer now , a caboose . :)
Yo. The head end power can still do it. Also a rare caboose ending. Nice.
best sound in the world to bad its dying out
Still the best EMD soundtrack, the non turbo 567, remember them sounding like this on railroad lines in Belgium, where on the grades they would use 2 or 3 loco's on iron ore and steel trains, and the good old 567 would take the abuse of pulling a train uphill notch 8 at 15mph for ever.
Our family moved to a new house in 1969. It stood about 4 long blocks from MoPac's 200-foot-wide right-of-way. Back then MoPac ran long trains behind F7s, GP 18 (riding on trucks from scrapped Alco units - mostly PAs), GP7s, and GP9s. An expressway was built on either side of the MoPac tracks and the expressway is known locally as "MoPac Blvd".
Northbound MoPacs trains had a steep grade to fight all the way from the Colorado River bottoms to Snead siding, a distance of roughly 6 miles. At night I would lie in bed and listen to the music produced by the 567s traveling upgrade. Since MoPac Blvd was completed all one can hear is the white noise of traffic.
Had to watch again and still so cool!!!!
Never get tired of hearing that sound. I listen to it often myself. Thanks for watching...
I miss the sound of 567s. When I was growing up FEC still had some high hood GP9s on their roster for local jobs and that's what they sounded like at full chat.
Great video!
The sound of these EMD locomotives reminds me of the Irish A class Metropolitan Vickers locomotives after these were rebuilt with EMD engines. I recall how on a sultry summer day the sound of such an engine would carry on the air.
Nothing like the sound of a big diesel "cranking down!"
Sonny Dean
When your foot hurts because you have it mashed down on the gas pedal trying to get more. Yeah, I’m a trucker, that’s how it works.
LOL. Yah, the years of running coast to coast when cruise control wasn't even thought of yet in big trucks.
@@1jackdk and little motors.
beautiful engines. excellent camera work! very well done sir.
Thank you Eric. Glad you enjoyed it, and thanks for watching.
Yes! A 48 piece symphony!!!
A 1969 AMX with a 390, or three 567D1 prime mover's, it's all about power. Rock on bud!
Put both ear buds in to get there full effect of the 3 engines. Great video.
AWESOME SOUND!
+Pcorf Creations Indeed there!!!
Wicked EMDs dude
Tony
What a great sound!
567 first gen are like the turtle and the rabbit.
I wonder how long GE's or Alco's prime movers would last under that sort of load! Hard to beat EMD's.
I think they tried GE's for a while, and they didn't work out well at all.
I believe Cartier proved Alcos could do this work for years
@@jaash5 And so did the LS&I.
@@1jackdk probably shot fire out if the exhaust and died like they are prone to do
oh man that brings back memories. you dont see this through northern WI or MIN anymore
Nice video Jack! It's been like 5 months since you last posted a video. Glad to see you're back.
Makes me really miss pulling the 2.7% grade out of Peace River Alberta with a quadruple set of well worn CN SD40-2's. On a good day or night when they were all actually loading properly (which was only about half of the time), they pulled like a bastard. Whatta rush.
The Units are leftovers from the Reserve Mining.They are still gracing the Rails.
Very nice. So that's the old Chicago North Shore Line railroad up by Lake Superior. I didn't know it went that far north. I thought it would have been more like 90 miles from Chicago like the Chicago South Shore & South Bend Railroad.
North Shore Mining, nothing to do with Chicago. A local industrial railroad.
We went to Silver Bay several times when I was an Engine Cadet on the Middletown. Silver Bay-Toledo was a very common run for the Columbia steamers.
Two SD28's non turbo charged with a rebuilt SD9 (or SD18) on rear. Talk about heavy loads!
Great soundtrack!
The sure did make beautiful music. Thanks for watching...
Awesome! Looks like the blue locomotive was just in tow. Not pulling❤
Very nice sound
Thanks for the upload good stuff!
Stunning force. Diesel...
They sound good Jackmp
Mark Duxberry That they did Mark. Shame that they are gone now. Thanks for watching...
Like listening to GOOD music!!!
It has CottonBelt! I'll be posting a video in about an hour of what's been eating up all my time recently. Car show season is on me, and I had lots to do to get ready for it. There was a few guys wanted to know if I was OK, or if something happened to me. I'm alive and kickin! Thanks for your support, and watching...
1800 hp per locomotive. 5400 total. Not much hp but the train moved along pretty well.
Iron ore is very heavy
I grew up on the Mississippi river, blessed to be between the Burlington Route, C&NW, Milwaukee Road, and TowBoats, The C&NW ran Alcos, the rest had EMDs, what a childhood! My question, didn't C&NW run these in high hood units out of the Messabi range in the 60s?
My bad, they were 24s
very cool too see any sd 18 doing what they did best!
I've been making runs up the western shore of Lake Superior for more than a year now, and pass right through Beaver Bay. I didn't realize until now that I have been crossing paths where these 567's once raged. Does this track cross Rt 61?