Thanks for all the great videos @Edge Autosport! These have been extremely helpful for me. Do you think it is possible that upgrading to a Koyorad Radiator would be more beneficial than a (mishimoto, Aem) short ram air intake? When you talked about the car pulling timing it made me think of this.
Blows my mind seeing the big torque and low hp numbers from such a lil engine. Definite signs of a small turbo. Hoping to pick up a new 2020 within a week
Any difference an intercooler is going to make is going to be immediate. However, the intercooler really starts to shine when you get more aggressive with the tuning since the intercooler is providing cooler temps.
Awesome video, just ordered a Mishimoto intercooler and piping kit for $480 shipped. Do you think the piping will have a noticeable increase in power? Also what fuel did you use when tuning? 91 or 93?
We use 91 because that's the best gas we have in our area. The piping isn't going to be a significant change on stock turbo. We did a test with that and just released the video if you want to check it out. Make sure you check us out for your next mod! We'd love to help you with your build!
Thanks! There really wasn't a huge reason other than Mishimoto has been a good company to work with over the years and it appeared that this was a really nice product based on the build specs. The cast end tanks are always really cool to me and it was bar and plate which I wanted for the build too. It was a very complete kit with the option to use stock piping or upgraded too which was cool. We obviously choose parts that we sell too.
Did you have trouble getting the cold side completely flush? There was no way to get a torque wrench to screw the bolts, I had to use a tiny 10mm box wrench to be able to tighten the bolts.
Installed mine a few hours ago, about 3 or 4 of the clips didn't make it on somehow but got the metal screws and most of the clips on, that thing is never coming off so long as I have it
So basically from what I’m gathering is that the stock piping is fine for the stock turbo and if you plan to get a bigger turbo then the aftermarket piping is worth it as it allows more airflow? Or an I wrong?
@@EdgeAutosport Gotcha. I might get the radiator for now that way the small turbo doesnt work that hard to get air compared to bigger pipes. it sounds like a loss in turbo efficiency since it it has to work harder thus creating turbo lag. Idk if you felt any lag with the piping on.
after installing the mishimoto intercooler on my 2020 Si sedan i noticed a small vibrating noise that only happens when i am riding at 2000-2600 RPMs. i kept the stock piping and hoses and just installed intercooler. it does it in every gear around that RPM range its like a gurgling vibrating noise. its only done it since after i installed the intercooler. any ideas what it might be? its not loud but it kinda reminds me of the rattle i used to get in my old EG6 when the engine vibrates at a certain RPM. could it be bc the airflow has changed and its causing a vibration noise?? or is it the intercooler not properly mounted on the bushings?
so you kept the original pipping? And only switched out the intercooler im just asking because im looking for a intercooler upgrade on my 2019 si sedan
They have nothing to worry about at these power levels. I've been pushing ~300whp for a few months and I drive aggressively often. Proper maintenance and a good tune and you'll be good.
Hi, just a quick question, I am purchasing this intercooler and I have a Ktuner, I believe you said after installing the intercooler there is some tuning need to be done could you please give me a little more details about it ?
To make use of the cooler, denser air, you can get more aggressive with the tune. The benefit of the intercooler is great by itself, but you can more aggressively tune the ECU and get more power from the car after the upgrade. We suggest a custom tune if you'd like to maximize the intercooler's potential to increase performance.
We haven't tried that. You could probably bolt it on without a tune just fine but it's not going to benefit you as much as a tune will for making power. However, it will keep the temps much more consistent and keep them lower. If airflow changes enough, then it could take the ECU into areas that it isn't used to seeing and start making automatic adjustments that you don't want.
Whether there is an option or not, you can still get etuned. I don't believe there is an option though. Go check out our eTune listing, it explains a little more about the "how" of your question. - edgeautosport.com/edge-autosport-etune-honda-civic-2016-2019/
Can't make power without proper cooling, now I gotta get this intercooler and take off the stock one, I'm planning on getting a tuner soon plus new intake for the nice turbo sounds, is the sedan version any harder than the coupe or is it the same ?
An intercooler is always a good call! The sedan and coupe should install similarly. We've got some Ktuners ready to roll if you want to claim one, head over to the website or give us a call.
@@EdgeAutosport after installing the intercooler withg stock piping why do i have a small vibrating/grinding noise at 2k-3k RPMS ? could it be that the Metal Undertray isnt secure enough?? it is missing a few plastic fasteners
Might be a long shot since this video is 9 months out but what’s all the mods you have done to this civic when you tuned it with the Intercooler installed? I’m just seeing how much I’ll be making when mine gets done.
From what I understand if you're not tuned it doesn't matter. But if you plan on running a bigger turbo and boost levels above stock it'll help to have the charge pipes. Again, charge pipes are something you can do later on.
Hi thanks for the video , I have a quick question not regards to this video but to a 10g civic. I have a 2020 si coupe an I would like to get some wheels spacers but I am not sure on the site I should get is any side you would recommend, 20mm , 25mm or 27mm ? Thanks in advance and I appreciate your help
To be honest, I don't like using spacers longer than 10mm. I know it's more money, but getting a wheel fitted the way you want is a better option. From a fitment standpoint, I can't make a recommendation because it's really based on your opinion of how it looks and fits and what you want. That's really up to you.
I'm a bit confused by your question with the double negative but I think I understand. You can use stock piping and it will not have a significant effect on performance.
Also an owner of a si. I got a question. Will you get a check engine light with the mishimoto intercooler without a Tune? Currently running the prl street intake.
That alone shouldn't cause a check engine light. But I suppose there is a change the ECU could sense enough change in air quality that it might throw a CEL. I really don't know. We're so used to tuning before getting into bolting on parts.
@@EdgeAutosport thank you so much for the feedback!! I'll try and get some more information. I'm trying to put bolts on first before a tune so it all comes together.
We don't have experience with the PRL but we know it's good. Especially the new one with the billet end tanks. I don't think you can go wrong with either honestly. The Mishimoto performs well for us. We might end up testing the PRL one day too.
Haha yes, her name is "Mahle". Also, we almost put one in the end of this video but didn't. We're going to start putting them in. We probably have 3 hours worth of outtakes at this point lmao. They're ridiculous. The one in this video was actually a mistake and not meant to be included. I was lucky because I didn't cuss or do anything completely idiotic like I usually do LOL
@@EdgeAutosport Sorry, I'm late to the party. Just want to confirm the car was not running flex fuel in this video, correct? Glad I came across your channel the videos are top notch!
Hey man I wanted to know what your thoughts are on the Injen intercooler? I wanna know because I will be purchasing one! But if you can’t tell me opinion I understand. What are the benefits of the inner cooler
I don't have experience with that one in particular but looking at what it is, I don't think it's a bad choice. It's certainly going to be way better than stock. It's bar and plate so that's very good for cooling and overall volume and capacity. I actually like the end tanks, they look pretty nice. You might experience a dip in boost pressure but the benefits will outweigh that. I would definitely get the car tuned after, in case it is able to pick up more power after the intercooler. If you'd like to purchase it from us, here is a link. Let us know if you have any other questions! - edgeautosport.com/injen-front-mount-intercooler-honda-civic-1-5t-inc-si-2016/
I really appreciate your response and it helps me a lot choosing. The only reason I will be going with the Injen is because I have the injen piping kit and i wanna see the gains ... thank you very much ! Happy holidays!
Whenever you put a pardon, you need to let us know what the difference is in torque and horsepower. We’d like to see that you are not mentioning the horsepower regained or the torque then, when you turn it the same thing horsepower and torque that’s what tells you how fast and how good it’s working and what the differences if he gets a little hotter well that’s something we have to know to so we could know what we are doing or how we are going to do it let us know all these cause we ask questions thank you anyway my name is Raymond. I spoke to you guys today and be talking to you tomorrow to see what we could come up with for my Ford ranger 2022 to see if we could get a larger turbo And talk to Alan about the tuning and what I would want and what can be done. Also, we have to measure all the facts of the situation thank you I always see your channel. I’m one of your guys fans and I do have a racing car but it’s a roadie motor at work and rotary motors, and, I run in a quarter of a mile or the eighth of a mile my car to last time I took it to the track it was running 6.7 quarter of a mile at 210 miles pass in a quart of a mile for now we might get it a little faster I’m running a Garrett call Barry Turbo 91 up front in the cold side back side well as you know we all have secrets how many pounds of boost that something that came to my cell phones, but I don’t think we’re running with the Lobos. We are giving the bullshit need to run fast that I won’t keep from you because you know more than that. Thank you be in touch with you guys you guys are awesome. Here is truly Raymond 👍👍👍👍
lol...Need to be 6 foot tall. Little people problems, I know the pain. Are your dynos adjusted for elevation? If not, at sea level, the gains would be even more substantial. What octane is the car tuned for, 91, 93, or maybe some e30?
Link to ALL Mishimoto intercooler options is in description!
is there any description of all the mods to date ?
Thanks for all the great videos @Edge Autosport! These have been extremely helpful for me. Do you think it is possible that upgrading to a Koyorad Radiator would be more beneficial than a (mishimoto, Aem) short ram air intake? When you talked about the car pulling timing it made me think of this.
Would it fit RHD vehicles?
This video helped SO MUCH. Literally the only channel i can watch and actually learn how to do stuff on my si. Thank you!
Glad you like it! Thanks!
And the videos don't start with "ITTTTTTTTTTTTTTTTTTTTTTTTTTTTTTS YA BOIIIIIIIIIIII STINKYCUNT34"
Absolutely fantastic video. Used it for my Mishimoto install. Exactly what I needed. Especially helpful in guiding bumper removal. Many thanks!
I love the way you guys explain all installs in details. Helped me several times to perform my updates alone. Thank you!
Now that is a must have part for all Civic X SI owners!
Yo sick those 10th gens are moving! And congrats to Tony on the E tune! Great video Edge 🤙🏽💯
Used this video today on M’s black intercooler, thanks!! Definitely see and feel a significant difference in IAT and boost.
“Make sure you’re 6 feet tall” lmaoo I caught that
Well I'm fucked lol
Blows my mind seeing the big torque and low hp numbers from such a lil engine. Definite signs of a small turbo. Hoping to pick up a new 2020 within a week
when you do, hit us up for any mods!
@@EdgeAutosport will do. Only really plan on catback, intake, and maybe tune
Alan is the man! 👌🏽👏🏽
Thanks for this video. I ordered my IC on Black Friday. I’ll be using this vid as a guide to remove bumper and install the IC.
Glad to help! For any parts you need in the future, let us know or check out our site!
I second that notion with Brett, down there. Awesome videos man.
2020 Si sedan here. Just subscribed.
Thanks for the sub!
Thank you, guys!
So comprehensive and detailed! Thank you!
I just installed mine!! I really appreciate your video , do you know how soon do I begin to see the difference?
Any difference an intercooler is going to make is going to be immediate. However, the intercooler really starts to shine when you get more aggressive with the tuning since the intercooler is providing cooler temps.
Really liking this build picking up my 2020 Si this weekend
Nice! Congrats! If you need parts or tuning, hit us up!
Edge Autosport I sure will
Awesome video, just ordered a Mishimoto intercooler and piping kit for $480 shipped. Do you think the piping will have a noticeable increase in power? Also what fuel did you use when tuning? 91 or 93?
We use 91 because that's the best gas we have in our area. The piping isn't going to be a significant change on stock turbo. We did a test with that and just released the video if you want to check it out. Make sure you check us out for your next mod! We'd love to help you with your build!
If I put the OEM intercooler back on for a smog check, will I need that plastic stuff that you cut off?
Why would you put the stock one back on for emissions? That would be a complete waste of time.
@@candidcanoncamera577 They aren't CARB legal, and in California apparently this wouldn't pass a smog test? Something along those lines.
Love the video. I would like to know why you decided to go with this mishimoto over other brands?
Thanks! There really wasn't a huge reason other than Mishimoto has been a good company to work with over the years and it appeared that this was a really nice product based on the build specs. The cast end tanks are always really cool to me and it was bar and plate which I wanted for the build too. It was a very complete kit with the option to use stock piping or upgraded too which was cool. We obviously choose parts that we sell too.
@@EdgeAutosport would you recommend keeping the stock piping or getting mishimoto piping
Turbo upgrade next? Maybe a drop in upgrade from 27won or Pureturbos?
I'll just say to keep watching....
Awesomeness great vid!
Did you have trouble getting the cold side completely flush? There was no way to get a torque wrench to screw the bolts, I had to use a tiny 10mm box wrench to be able to tighten the bolts.
I don't remember having any issues. You shouldn't really need a torque wrench for this.
I’m wanting to part out my car. How do I replace the plastic I cut for the mishimoto intercooler to kit? I can’t find that part
Is it worth just getting the inter cooler or should I go with the piping too? Would it make a difference?
The intercooler is where the majority of the performance gains will come from, especially with stock turbo.
Another great video 👌
How tight are the bolts when you put it back? How much torque for the bolts?
Mishimoto got the babiest increase in power
hey man great video, i want this intercooler for looks not for performance... do i need anything before i get this and what’s the purpose for it ?
Just buy a stencil and paint your stock intercooler
Installed mine a few hours ago, about 3 or 4 of the clips didn't make it on somehow but got the metal screws and most of the clips on, that thing is never coming off so long as I have it
Looking at getting it and tuning a little down the line
So basically from what I’m gathering is that the stock piping is fine for the stock turbo and if you plan to get a bigger turbo then the aftermarket piping is worth it as it allows more airflow? Or an I wrong?
I would agree 100% but add on that it's not a bad choice to get bigger piping on stock turbo. It doesn't hurt you, but it doesn't help a ton.
@@EdgeAutosport Gotcha. I might get the radiator for now that way the small turbo doesnt work that hard to get air compared to bigger pipes. it sounds like a loss in turbo efficiency since it it has to work harder thus creating turbo lag. Idk if you felt any lag with the piping on.
So you only changed the intercooler? With the same tubes from stock one?
“make sure you’re 6 feet tall” we’ll all my short kings can’t do this install :/
after installing the mishimoto intercooler on my 2020 Si sedan i noticed a small vibrating noise that only happens when i am riding at 2000-2600 RPMs. i kept the stock piping and hoses and just installed intercooler. it does it in every gear around that RPM range its like a gurgling vibrating noise. its only done it since after i installed the intercooler. any ideas what it might be? its not loud but it kinda reminds me of the rattle i used to get in my old EG6 when the engine vibrates at a certain RPM. could it be bc the airflow has changed and its causing a vibration noise?? or is it the intercooler not properly mounted on the bushings?
so you kept the original pipping? And only switched out the intercooler im just asking because im looking for a intercooler upgrade on my 2019 si sedan
I have the intercooler but not the hardware like the bracket to hold it in place and screws ,by any chance do you guys sell that I REALLY NEED IT
If it's just hardware you need, give Mishimoto a call, they can probably set you up.
Súper amazing 🔥🔥🔥
Greetings friend, I want to know if these pipes come with the entrance to be able to put Water methanol on it?
Gr video are you worried that the connecting rods might fail?
We're not saying it won't happen, but we're not concerned.
They have nothing to worry about at these power levels. I've been pushing ~300whp for a few months and I drive aggressively often.
Proper maintenance and a good tune and you'll be good.
Hi, just a quick question, I am purchasing this intercooler and I have a Ktuner, I believe you said after installing the intercooler there is some tuning need to be done could you please give me a little more details about it ?
To make use of the cooler, denser air, you can get more aggressive with the tune. The benefit of the intercooler is great by itself, but you can more aggressively tune the ECU and get more power from the car after the upgrade. We suggest a custom tune if you'd like to maximize the intercooler's potential to increase performance.
Hi team my question is do I need the ktuner on the new mishimoto intercooler or can use it with factory power.
We haven't tried that. You could probably bolt it on without a tune just fine but it's not going to benefit you as much as a tune will for making power. However, it will keep the temps much more consistent and keep them lower. If airflow changes enough, then it could take the ECU into areas that it isn't used to seeing and start making automatic adjustments that you don't want.
Edge Autosport curious, how would this be a bad thing? I’m about to do it and need to know if I should stop lol
Do you need to tune it , or i can slap it in like a intake system and ready to go ??
would you recommend this or the prl intercooler
Why did I buy a 10th Gen a few months ago? Now I missed all the giveaways! Dayum! 🤷🏾♂️🤦🏾♂️
How would I get E-Tuned if I bought this Intercooler? Or is there an option for it on KTuner?
Whether there is an option or not, you can still get etuned. I don't believe there is an option though. Go check out our eTune listing, it explains a little more about the "how" of your question. - edgeautosport.com/edge-autosport-etune-honda-civic-2016-2019/
Is there a difference between Mishi piping and stock piping?
Can't make power without proper cooling, now I gotta get this intercooler and take off the stock one, I'm planning on getting a tuner soon plus new intake for the nice turbo sounds, is the sedan version any harder than the coupe or is it the same ?
An intercooler is always a good call! The sedan and coupe should install similarly. We've got some Ktuners ready to roll if you want to claim one, head over to the website or give us a call.
@@EdgeAutosport most definitely, I have the page for the Ktuner bookmarked on your website for when I get the money (:
Can I keep the stock piping for the intercooler or do need to be replace too
You can keep stock piping if you want, that's fine.
Edge Autosport thanks I wanted one for my fk7
@@EdgeAutosport after installing the intercooler withg stock piping why do i have a small vibrating/grinding noise at 2k-3k RPMS ? could it be that the Metal Undertray isnt secure enough?? it is missing a few plastic fasteners
Might be a long shot since this video is 9 months out but what’s all the mods you have done to this civic when you tuned it with the Intercooler installed? I’m just seeing how much I’ll be making when mine gets done.
I believe we had all the bolt-ons but had not switched to ethanol/flexfuel yet. So this is full bolt-ons with pump gas.
Edge Autosport can you clarify what full bolt on is for this gen civic?
So are charge pipes just as important as an intercooler upgrade? Or will the results stay the same?
They're not as important as the intercooler itself but we'll be doing the pipes too so stay tuned!
is it necessary to change the intercooling piping as well? Or will changing the core be fine
From what I understand if you're not tuned it doesn't matter. But if you plan on running a bigger turbo and boost levels above stock it'll help to have the charge pipes. Again, charge pipes are something you can do later on.
Hi thanks for the video , I have a quick question not regards to this video but to a 10g civic. I have a 2020 si coupe an I would like to get some wheels spacers but I am not sure on the site I should get is any side you would recommend, 20mm , 25mm or 27mm ?
Thanks in advance and I appreciate your help
To be honest, I don't like using spacers longer than 10mm. I know it's more money, but getting a wheel fitted the way you want is a better option. From a fitment standpoint, I can't make a recommendation because it's really based on your opinion of how it looks and fits and what you want. That's really up to you.
I know this an older video, but can you tell me if the PRL piping will fit on the Mishimoto FMIC?
As we have not tested that specific fitment, we can't say for sure...
@@EdgeAutosport thank you. Great videos BTW👍
Is it not counter productive not swapping out the charge piping and just running with the stock?
I'm a bit confused by your question with the double negative but I think I understand. You can use stock piping and it will not have a significant effect on performance.
Also an owner of a si. I got a question. Will you get a check engine light with the mishimoto intercooler without a Tune? Currently running the prl street intake.
That alone shouldn't cause a check engine light. But I suppose there is a change the ECU could sense enough change in air quality that it might throw a CEL. I really don't know. We're so used to tuning before getting into bolting on parts.
@@EdgeAutosport thank you so much for the feedback!! I'll try and get some more information. I'm trying to put bolts on first before a tune so it all comes together.
Which one u prefer mishimoto or prl fmic for agrresive tune?
We don't have experience with the PRL but we know it's good. Especially the new one with the billet end tanks. I don't think you can go wrong with either honestly. The Mishimoto performs well for us. We might end up testing the PRL one day too.
@@EdgeAutosport thanks for ur reply
Would like to win the intercooler JP for my Honda Civic 1.5t have all the upgrade except the intercooler spend about $5000 dollars. Thankyou
How do you get broken plastic tabs out of the bumper??
Which ones are you referring to?
Does the oem plastic fin need to be cut off? Can it be removed instead?
It's a lot easier to cut it
What about the gaz consumption? Any effect?
Only when you press the gas all the way down. ;)
why don't you upgrade the charge pipe and the intercooler pipe?
We did.
What’s the boost psi at now?
We bumped it up to about 23 lbs of pressure. The new intercooler allows for a lot more tunability!
Did I miss something, or did you name the stock cooler molly, JP?
Also inB4 outtakes vid of JP.....
Haha yes, her name is "Mahle". Also, we almost put one in the end of this video but didn't. We're going to start putting them in. We probably have 3 hours worth of outtakes at this point lmao. They're ridiculous. The one in this video was actually a mistake and not meant to be included. I was lucky because I didn't cuss or do anything completely idiotic like I usually do LOL
C'mon camera man! I know you're trying to be smooth and professional but I wanna see man. Go around and focus and zoom in man!
Are you running a flex fuel kit? Or just tune for ethanol blend?
Our car has flexfuel.
@@EdgeAutosport Sorry, I'm late to the party. Just want to confirm the car was not running flex fuel in this video, correct? Glad I came across your channel the videos are top notch!
@@stretch5510 correct
What mods did the fc3 have at the time of IC installation?
Turboback exhaust and intake, along with custom tuning through our KTuner V2.
This or prl?
I would recommend both.
Hey man I wanted to know what your thoughts are on the Injen intercooler? I wanna know because I will be purchasing one!
But if you can’t tell me opinion I understand. What are the benefits of the inner cooler
I don't have experience with that one in particular but looking at what it is, I don't think it's a bad choice. It's certainly going to be way better than stock. It's bar and plate so that's very good for cooling and overall volume and capacity. I actually like the end tanks, they look pretty nice. You might experience a dip in boost pressure but the benefits will outweigh that. I would definitely get the car tuned after, in case it is able to pick up more power after the intercooler. If you'd like to purchase it from us, here is a link. Let us know if you have any other questions! - edgeautosport.com/injen-front-mount-intercooler-honda-civic-1-5t-inc-si-2016/
I really appreciate your response and it helps me a lot choosing. The only reason I will be going with the Injen is because I have the injen piping kit and i wanna see the gains ... thank you very much ! Happy holidays!
Whenever you put a pardon, you need to let us know what the difference is in torque and horsepower. We’d like to see that you are not mentioning the horsepower regained or the torque then, when you turn it the same thing horsepower and torque that’s what tells you how fast and how good it’s working and what the differences if he gets a little hotter well that’s something we have to know to so we could know what we are doing or how we are going to do it let us know all these cause we ask questions thank you anyway my name is Raymond. I spoke to you guys today and be talking to you tomorrow to see what we could come up with for my Ford ranger 2022 to see if we could get a larger turbo And talk to Alan about the tuning and what I would want and what can be done. Also, we have to measure all the facts of the situation thank you I always see your channel. I’m one of your guys fans and I do have a racing car but it’s a roadie motor at work and rotary motors, and, I run in a quarter of a mile or the eighth of a mile my car to last time I took it to the track it was running 6.7 quarter of a mile at 210 miles pass in a quart of a mile for now we might get it a little faster I’m running a Garrett call Barry Turbo 91 up front in the cold side back side well as you know we all have secrets how many pounds of boost that something that came to my cell phones, but I don’t think we’re running with the Lobos. We are giving the bullshit need to run fast that I won’t keep from you because you know more than that. Thank you be in touch with you guys you guys are awesome. Here is truly Raymond 👍👍👍👍
How much for kit for 2012 Mazda speed3
Check out our site! - edgeautosport.com/shop?action=finder#/filter:ss_car_hierarchy:2012$253EMazda$253EMazdaspeed$25203/filter:ss_parts_hierarchy:Intercooler$253EIntercooler$2520Kits
227 hp at the wheel?
Yes
Am I the only one that’s having some trouble getting the bumper back on? Lol
Haha what trouble? We'll help
lol...Need to be 6 foot tall. Little people problems, I know the pain. Are your dynos adjusted for elevation? If not, at sea level, the gains would be even more substantial. What octane is the car tuned for, 91, 93, or maybe some e30?
We do use corrected numbers so they're adjusted. We use 91 octane. We'll get into e30 soon
I need some NON SI videos 😂😭