How to make simple wireless using RF module : Tutorial 28
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2017
- An RF module (radio frequency module) is a (usually) small electronic device used to transmit and/or receive radio signals between two devices. In an embedded system it is often desirable to communicate with another device wirelessly. This wireless communication may be accomplished through optical communication or through radio frequency (RF) communication. For many applications the medium of choice is RF since it does not require line of sight. RF communications incorporate a transmitter or receiver.
Thanks for such an informative and lucid tutorial. just want to add one thing.
For a battery operated transmitter - it's better to provide ground to pin 14 only through the push buttons attached to the pin 10 to 13 and not directly. so the transmitter will go to power saving sleep mode (1 to 4 microamp) when no button is pressed. else it continues to send data even if no button is pressed. We can save battery this way.
One more thing , HT12D has latching outputs so no need to use separate flip flop circuitry.
I don't know Hindi, but as you explained so clear and good (by diagram), I could understand everything!
Thank you so much!
th-cam.com/video/QKTEkuXMxJs/w-d-xo.html
Thanks for your interest to teach us. I am interested to connect this project to control the water level. I have already a ready made high level trip system which uses wire connection from the float. As the wire connection between the tank and the controller is difficult, I wish to add transmitter / receiver in between. Please guide me how to connect both whether I connect the microswith with float and led connection to the level controller module?
Very good video, best on TH-cam for making rf transmitter and receiver circuit
HAve done this
Excellent demonstration!
Bhut simple way m app smjhate h sir
Thank you so much
I am looking for Wireless 2.4Ghz based 4 way communication system.
Can you let me know the circuit for the same.
Help
I need a rf wireless controller (transmitter and receiver) for a distance of 2 to 5km.
To function as follows:
On the transmitter is to connect a "PIR" motion detector
In the recptor a led.
The operation should look like this: After the "PIR" detects movement, it sends a signal to the receiver, which in turn lights a led.
Thanks
receiving data is always high? can we make it low? actually i want to replace buttons with wires and put them in water to know water level.
btw can u make a water level and auto on/off ac solenoid pump with manual switch through which we can turn on/off motor at any time?
Sir please help me
I made a 4 channel transmitter and receiver circuit using 433Mhz rf module and HT12E and HT12D ic. But when I provided both the reciver and transmitter circuit same voltage 5v then communication didn't work that is data is not received. But when I powered the transmitter circuit with low voltage than receiver circuit around 2.5 v then communication between the two worked. Why is this happening?
can i add thumb joystick module/ potentiometers instead of push switch??
Can we make it even smaller..... And use a beeper or speaker instead of LED's , and use a two way switch instead of button switch...... Then it can work as a tracker... Please tell I
yes
How to increase the frequency meter
How to connect RC car motor for this can I move back /forward right/left.
Sir, which modules did you use kindly mention them
how to produce bi phase pulses at the receiver output depending on the transmitter?
Sir iska range kitña ha ???
Kitna distance se ek kaam karega??
Can LED function be inverted?
Means default low and high when push button pressed??
Sir kya hum push ki jagah 10 k potentiometer use kar ke led ki brightness ya motor ki speed ko control kar sakte hai kya pls pls pls reply karo
Sir kya iski range ground floor se above 5 th floor tak ja skti hai .means ke reciver niche pda hai and transmitter 5th floor pr .kya ye kaam krega??
Sir can you please tell me
How to connect Audio Amplifier in this circuit........
For school or other purpose
Use multiple speaker
I like this video, so can I use "CD4017" for decder and what IC mast use for code? tall me about it pleas sir.
super video, how did you made this video? software name?
Very useful video...tnx bro.
i want to connect ir sensor on transmitter side and and a dc motor to show output on receiver .How can i do it?
How add itching switch
Only on if push on switch hold
what all difference if 12v?
(not regulated to 5v)
hello sir jo ht12e and th12d ki addressing technique use kar k hum 100 rf pair mai bina interference/clash k kaam kar sakte hai kya?
shall i have to increase the voltage for doing so??
Dear sir, nice of you for giving much knowledge to operate module. Sir, can be operated water motor ON / OFF according water level ie water level wirelessly of the tank. Thanks
th-cam.com/video/QKTEkuXMxJs/w-d-xo.html
Sir can we use 670kohm resistor instead of 750k Ohm resistor
Can we put LDR light sensor instead of button switch?
Can you tell me what the current consumption of receiver module when ideal ON but not receiving anything?
nice video , how can i get a transmission range of 200m?
sir you are best teacher
Sir, how to make in home wireless motar speed controller to use this circuit as a drone mottar speed control. Hv you any circuit diagram to use mottar speed controller for this RC transmitar
Sir I have a one small sound bar system without remote but I want to a remote setting please tell me how to setting... Here I mentioned system buttons setting...
1) on / off (Back side very small switch)
2) ll - Mode: USB/SD/Bluetooth/FM.
3) >|| - Play / pause.
4) > - Forward / Volume Up
5) < - Reverse / Volume Down
This is Manual configuration please tell me this configuration handle by Remote control system..
Really informative and cool :D thanks to make learning cool stuff easy 👍
Sir agar ham rf receiver me 3.7 volt de to decoder me pin number 15 aur 16 ke beech me kitne kilo ohm ka resistor lgana thik rhe g
I want to make Gps signal recieve from top of the roof and give them in room via wireless can you help me out any idea
Please explain the RF transmitter and receiver module circuit, how it works
It is simple bro
For example if we dip our finger in the water up and down we notice some waves which moves in all direction in the form of circle and at the other last edge of water wave range we put our hand to sense the water wave so our fand works like riciever and finger which is oscillating is works like transmitter
Similarly if current applied to copper wire or coil it produced magnatic and current field and attached crystal oscilattor to this coil which on and of the current applied to coil so magnatic field also oscillating thus this oscilating produce radio wave and more oscilating produce more powerful radio wave and at the result waves are long lasting similarly like fluid wave they are more stronger then wave produce in path tup so more big wave means more distance cover and small wave means small distance
Thanks
How we can buld rf 433
Very easy and well explained. Even a new person out of the field can understand an do it. I am new to your channel and this is really a very good channel I'll recommend to all who want to do DIY projects. GOOD LUCK 👍
Bro what is the purpose of using antenna in transmitter and receiver
how much Ampere output on the 4 channel? with 5V from AA battery
Agar single channel chaiye to kya tab v yehi ic use krna padega. ??
Bro tell me will the led glow if I don't give battery to transmitter circuit
Sir I need only one button and one for speed up and down button /system
Sir can we send a 2khz pwm signal by this encoder ic and if i connect a transistor for the pust button and the transistot operates at 2khz can we recieve the same signal at the decoder
Thank you sir
sir isme l293d kaha lagega
How many distance this remort work.i mean its range.tell me please
Sir would you make quadcopter circuit with this rf module
Very nice sir..
Samajhane ka sabase mast tarika hai ..sir🙏🙏🙏🙏🙏
Best video on TH-cam ...👍
Ur transmitter shows two extra resistance connected beside the TX module.What is that for. I want to make the Rc car.Will it really work.pls respond fast.
He used 9v battery for power, so added 7805 voltage regulator to convert it to 5v i think.
Pls tell how to keep the leds normal off and to get on when the switch is pressed
Yes i also want to know
praveen bhai 433MHz or 315MHz dono he module ki leye yahe cricuit rhega kia? . or long rang ki laye konse frequency ka module best rahega??
haa , dono ka rang same hoga.
Bhai is se remort control car ban jayegi kyuki batton dabane par chalu hona chahiye na vo to pehle se hi chal rha h
how can be make unique ids with this module while i m using this with arduino other rf signal and remotes is interfering in receiver
Excellent video
Dear sir ye aapka ek single circuit hai
Agar same Aisa circuit isky barabar
Mai rakah kar operate karay Jaya
Tab kay pahla wala interput hoga
Pls help kaya ye ek dusrya sai copy hi saktay hai agar ye ek dusry sai copy nahi ho sakty to koi bhi interput kar sakta hai pls aap batana thanks
Sir plz tell me how much volt is there at the led
apne kaunsa RF module use kiya hai 433 Megahertz ya 315 Megahertz..please reply
433
Very good exclent videos. You have explained stage by stage start from basic electronic circuit to robotics compared to other u tube videos..
Sir kindly reply which brand RC module is good if we buy from Amazon.
With microcontroller or without?
RF module of 433 MHz used in this video. Pl mention which brand of this module will match with encoder and decoder ic.
@@arkasali9 amzn.eu/d/dE0kawm
How do I get the RF module and how much will it cost?
how two incwrease dah qualitee of yaw angyeesh?
I'm not able to make connections of transmitter and receiver
Can u please help me
I want a receiver and transmitter for a rc helicopter, with 3 motors, speed controller means, mai 3 different motors ki speed ko control kr sku with two on /off switches for lights Plzz help me, make a vidio for rc drones reciever and transmitter 🙏
Great tutorial but Can the TX use 12v ? Thanks bro
Can the TX use 12v no
Use 7805 voltage regulator to step down voltage to 5v
sir plzz tell me which software do you use to make your circuit diagram because the diagram u make are really looking very good and we can understand it very
easily so plzz make a video no it or tell it in another video
th-cam.com/video/QKTEkuXMxJs/w-d-xo.html
Bina coding RF module work karega sir. Please reply answer sir.
Dear sir,
I have 1 questions please clarify,
If I have multiple transmitter and receiver at same place so there is a any chances of mismatch transmitter signals
th-cam.com/video/QKTEkuXMxJs/w-d-xo.html
The module matches the sequence of pins 1 to 8 over the transmitter ic and receiver ic . we can ground or leave floating these pins (pin 1 to 8 on transmitter side) and do the same thing on receiver side. We can make different combinations (theoretically 2^8 combinations) for different modules kept at the same site. so there won't be any interference between 2 separate modules.
Bhai to toh bahut sahi video bnaya hai
good description
Nice project
I make it but transmitter battery running only 4 days, please suggest for long run of transmitter battery
sir 1km ki range ke liye mujhe konsa module lena chahiye...is module ki range kitni ha?? please ans me as soon as possible.. its urgent
Sir I Do not have 750 ohm resistor for transmitter, any solution.... Please🙏🙏🙏
Distance for transmitter and receiver???
Why can be maximum distance TX and Rx ?
Namaskar ye Jo transmitter and receiver circuit component milenge kahs meerut ya delhi
delhi
Does it use for audio propose
Explanation for beginners is well. But how to use in practical ( i.e. for which purpose this can use ) please intimate.
Sir can we use220 ohm resister in transmitter
Nice Video Sir
Thanks Sir
Kamal kar dia sir gi.
Agar hum 750K resistor ke badley 1M resistor use karengey to kya ye circuit kaam karega?
Resister same value is not available near around my residence/ hometown guide some to put another value or range of resister
Push krne pr led on honi chaiye uske liye konsa ic use krna hoga
Single channel module me Ir signal kaise transmit karna hai
For tv
Sur mere pas 750 k ohm ka resistance nhi hai kya mai 1 mohm ka resistnace use kar sakata hua kya
Sir i made this wireless transmitter and receiver circuit.. but it not.. all connections is ok.. but it not working.. what is it problem
Isse dron me use kar sakte hai kya
if I will press continue push button then what about battery life
Hello sir use any resistance here
you are the real hero. I like you very much
sir mene ye 28 tutorial banaya par kam nahi kar raha
Sir Jha p led lagaye hai waha par apna trigger hone wala circuit laga denge na
yes
u are a life saviour
How can we make it even smaller please tell