I think having NO music is a GOOD choice. Also, I find if there is music, on any channel I watch, I will mute the sound. I am sure many other people also do that. When the ads come on, people won't hear them. Keep up the good work!!
Can you control 4 dc motor with this bidirectional. Can you explain how the transmiiter work because you use 2 IC encoder .how will the receiver know which IC decoder to trigger
friend i have found another couple of ics that can make this better TX-2B and RX-2B combining this with ht12e and ht12d you get 9 channels and can remove the switch from the transmitter
Instead of the keys, can a transistor be used driven by a pulse generator or PWM to control a stepper or simple motor at the receiver end? (With more electronics added at the receiving end)
@@estechknowledge Thanks for the reply. And another circuit to be filed away! My goal though is to use the HT12E/D system with a steady stream of pulses through one of the channels to have constant control of the speed of a motor while still having the other chanels available for other functions. I am aiming at an R/C vehicle with good control of speed, steering etc. The other chanels would be fun for things like reverse, lights, horn etc.
I'm not familiar with PNP transistor. Can you please tell me why on receiver, transistor's emitter arrow direction and LED diode direction is opposite of each other?
But sir you can modify this module by adding motors at the place of LEDs @new_video. This will help me a lot and also others who does not know much about robotics. I hope you will make this soon...
I am making a simple transmitter circuit with an ic555 pin 3 attached To the data pin,but the receiver which is connected to arduino is showing no response. But when i use an arduino to process the signal in the transmitter circuit,the receiver shows good results
Sir isme muje ek dikkat aa rhi hai jese Agar koi command isko diya jata hai or transmitter riciver ki range se Bahar chala jata hai to wo command continues rhta hai Iska koi solution batao Taki range se bahar nikate hi commands ruk jae
U can control 9 LEDs by adding 9 push button before ic 74147 (decimal to bcd encode) to ht12e in transmitter section. Ht12d to ic 7445 (bcd to decimal) to control 9 leds, I succeeded by my own research. Search these ic's... 74147 and 7445, 4028
instead of simple why not make the best possible, is has a lot of applications, i can imagine is combining this with some servos and bldc motors to make a rc robot with 2 tracks a cam and robotic arm
He able to use 8 channels because both IC uses different IC addresses. That slider switch let him pick which IC to send and which IC to receive based on the matched address.
Now this something spectacular, out of all your projects this is my favourite, its something creative different than all of those running leds pattern
I think having NO music is a GOOD choice. Also, I find if there is music, on any channel I watch, I will mute the sound. I am sure many other people also do that. When the ads come on, people won't hear them. Keep up the good work!!
Your prototyping skills are very good. I am always impressed by your clean work.
I like this video, the tutorial method is very good, thank you... the success of your channel continues
This is exactly what I am looking for. Thank you!!
Super exllent performance 👌👌👌👌 brother keep it up
Can you control 4 dc motor with this bidirectional. Can you explain how the transmiiter work because you use 2 IC encoder .how will the receiver know which IC decoder to trigger
friend i have found another couple of ics that can make this better TX-2B and RX-2B combining this with ht12e and ht12d you get 9 channels and can remove the switch from the transmitter
Can we add motor driver l293d with this ?
which software do you use for simulation ?
Anything about the microcontroller programming?
I haven't used any micro controller on this circuit
Instead of the keys, can a transistor be used driven by a pulse generator or PWM to control a stepper or simple motor at the receiver end? (With more electronics added at the receiving end)
This is quite similar - th-cam.com/video/Iif1pNMRxrM/w-d-xo.html
@@estechknowledge Thanks for the reply. And another circuit to be filed away! My goal though is to use the HT12E/D system with a steady stream of pulses through one of the channels to have constant control of the speed of a motor while still having the other chanels available for other functions. I am aiming at an R/C vehicle with good control of speed, steering etc. The other chanels would be fun for things like reverse, lights, horn etc.
I'm not familiar with PNP transistor. Can you please tell me why on receiver, transistor's emitter arrow direction and LED diode direction is opposite of each other?
sir rf 433 module ki jagah esp01 8266 module ko use kar sakte hai . rf 433 module ki range kam hai . pls sir is par video banao
you can change the IC with TX2B + RX2B and get 10 channel. Just need set the "osc.resistor" to each pair of IC's
Sir can I use motors instead of led lights?
Please reply as soon as possible...
Yes, but make sure to add more powerful transistor.
@@estechknowledge sir please give name of those powerful transistor.
But sir you can modify this module by adding motors at the place of LEDs @new_video. This will help me a lot and also others who does not know much about robotics.
I hope you will make this soon...
It is great! Can you make the leds be motors and change their direction with 2 way switches?
Yes you can
Use L293D Ic with these circuit
What should I do for increase the range above 4000mtrs
How we can make it to work all same time?without that switch. Thanks
Buen dia amigo que distancia alcanza el circuito
Hi bro nice work
But one question for u
Why using 2way switch
How much distance will performance this
I am making a simple transmitter circuit with an ic555 pin 3 attached
To the data pin,but the receiver which is connected to arduino is showing no response.
But when i use an arduino to process the signal in the transmitter circuit,the receiver shows good results
How much working distance...?
Why was the switch required?
Is it possible to use this for otors
Sir Its work but Can i cantrol 5v relay module on it whats the change required in connection
How make a lacth one, what the ic number.
can you please tell me the software which you use for simulation
I don't use any simulation software
Vc usou resistor de 1/8
Masterful Indeed!!....
Control distance howmany
❤ thanks
Where is the daigram circuit ??
I would love to see the circuit diagram for this.
Available now
@@estechknowledge Thank You, ES! 😀
@@estechknowledge can i use pt2262 and pt2272 instead of ht12d and ht12e for this project
@@estechknowledge can you control 6 dc motor with that forward and backward
How many distance will get to the transmitter and reciver?
100 meters +
@@estechknowledge how many rupees cost for making this circuit?
Sir isme muje ek dikkat aa rhi hai jese Agar koi command isko diya jata hai or transmitter riciver ki range se Bahar chala jata hai to wo command continues rhta hai
Iska koi solution batao
Taki range se bahar nikate hi commands ruk jae
Ok
Can you press more than one switch at a time?
4 switch at a time
@@estechknowledge Thanks
its 4x2 not proper 8channel😢
U can control 9 LEDs by adding 9 push button before ic 74147 (decimal to bcd encode) to ht12e in transmitter section.
Ht12d to ic 7445 (bcd to decimal) to control 9 leds, I succeeded by my own research. Search these ic's... 74147 and 7445, 4028
I THINK PNP TRANSIATOR IN YOUR CIRCUIT DIAGRAM IS SHOWN WRONG...
How many range
Muy buena idea..!!!
Will this still work if i remove the middle switch?
Watch the full video.
Can I make 12 channel transmitter and receiver by using 3 ic's instead of 2
Yes
Is sw1 necessary ? Or can i connect transmitter both Ics vdd at a time without using switch ?
Plz make studio Toor...
Please I need to see the circuit diagram
Available in the video description
Please I need the charts
iska kya use ?
Hello, nice film, but can you send me the circuit diagram?
Available in the video description.
Can I use any other RF Module?
Offcourse
instead of simple why not make the best possible, is has a lot of applications, i can imagine is combining this with some servos and bldc motors to make a rc robot with 2 tracks a cam and robotic arm
My budget does not allow me to do so. 😅
@@estechknowledge ihave 3 years wishing to make coilgun and my budget is not letting me so i perfectly understand
I would love to see the circuit diagram for this❤
Available in the video description
Please give components name in discription
can you send me the simulation if have ?
I don't have any
Bro how much does it cost ? Can you make this for me. I will pay you. Because I am confused between connections.
You can find its diagram in description.
👍👌
Why no sounds
I just want to see the audience retention without music.
@@estechknowledge it feels without any background audio
No audio voice
Its not working bro😢😢😢😢
I have all the same steps in this circuit
Bro it's not working 😢😢😢
Circuit diagram please 🥺
Available now
How to avoid 2 switches
He able to use 8 channels because both IC uses different IC addresses.
That slider switch let him pick which IC to send and which IC to receive based on the matched address.
I watch 1st
Bhai iska diagram bhi share kardo
Available in the video description
First show how it works and then show how you build it
এসব কোথায় পাব ভাই
You can buy those components from electronic stores or from online stores.
Why 8? 👍👍👍👍👍👍😂😂
Is this actually work
Offcourse
What i am doing
Please I need the charts
Эти микросхемы, уже слишком дорогие. На AliExpress есть куча разных, готовых вариантов. На разные частоты.