Hi nice work, I usually make mold of hands when finished, as it's the most common brake, then you can replace the hands as the same figure comes in. Saves lot of work.
It is a pleasure watching your work. You should share more videos of each repair project you do. I am sure you would have a pretty decent following. I have two chalkware statues from the 40's. A clown and a little bagpipe girl that are both 16 inches or so high. Both in very good condition with some small chips here and there.
The purpose for this video was to give steps in restoring plaster statues. I am an artist, I have restored and sculpting statues for over 40 years. My first sculpting material was marble, taught to carve and to repair work at a monument shop when I was 16 years old. I went on to college studied painting and sculpture, studied with professional artist also attended carving marble/granite in Vermont studios. I have been asked many times how to restore statuary, this video gives basic information to those who have interest in the process. It is not rocket science, anyone can do it with the understanding of materials, the simple process of armatures used in the original manufacturing. The best lesson is to find an old statue (doesn't have to be religious) and tear it apart. Deconstruct to build up. Know the process, study how materials dry, inter act with old plaster. With a little talent and passion you can do the same. You start small repairs and eventually after a few years you will take on larger projects. I offer all for free to anyone of interest, as this is becoming a lost art.
Thanks for the video. You say, " study how materials dry, inter act with old plaster..." I feel you did not teach us these things- which is the whole point of watching a video. I do not understand all these videos by people who do not tell you what materials they are using or information about the materials. I keep watching video after video, with nothing explained. It is very hard to spend so much time with no answers.
@@cchemmes-seeseeart3948 I appreciate your input. Other viewers have asked this question before and have answered the materials used. I need to make another post illustrating and showing materials. Basic materials are: Plaster of Paris Joint compound “Plumbers cement “ it is a fast setting and hard water proof cement. I use this as a base layer to attach any broken or to recreate missing fingers, parts. I use gauze mixed with cement (as above) to attach to existing armature or any parts that can be drilled and use a steel pin or dowel for strengthen joints. Sculpting the CANCELlayers with plaster
You welcome. I haven't followed up on this video in awhile. I produced this because many have questioned how to do simple repairs. I am working on an adder for plaster, mixing and a few other techniques. Thanks for checking this out.
Very helpful! I'm going to be working on a plaster st anne de boupre. Just minor issues thankfully but I also want to fully paint it. I know filming is hard but do consider doing another video at some point. I think we could a lot from your restorations, and there are not very many people who do this. Again thank you!
Thank you for you comment. I have worked on several statues during the the past few years. Many were fast turn around time which filming wasn't a priority. I have video of other basic issues others have requested. Just haven't downloaded, I will try to combine and download. Thanks again for watching.
What products are u using to build out finger? Plaster of paris? Plaster sheets? Joint compound? Do you use water based paint when u paint it? I presume a primer initially and a clear coat post painting too. Am I correct?
I have repaired so many things with Ready Patch sold at Home Depot or Benjamin Moore- it can be used on anything and won’t shrink, can be sanded and painted indoor or exterior.
Thank you for your video. I will soon be working on one that has four wire only without any of the piece attached and I'm looking for some tips like you have with the gauze on Blessed Mother's hand. THANK YOU.
Zita, I’m in the process of a new video, with a list of materials I use to repair statuary. If I can be of any help please contact me. I use plumber’s cement, with gauze to give a strong bond to wire. Don’t build up thick you want to establish a solid base for the plaster layer to carve. Allow time between layers. Good Luck A
Hi Tim, yes, I first begin with a strong binder of plumbers putty,. Durhams putty is a hydraulic cement which create base coat to secure the plaster parts together, then after putty dries apply plaster to sculpt and finish. I have found this method the best. Thank you interest. Angelo
Hello Angelo, thank you for this video. This helps a lot with a restoration project I am working on. I'd like to ask you for a few details on the painting steps. I've used oil paint but need a sealer or wax to finish it off. What do you suggest?
Hi Meghan, yes, on any surface I use either a matt or semi gloss varnish. Always remember to allow any paints to dry thoroughly. Oil paints will take several days or weeks to dry. The paints will crackle if you seal to soon. Wax is also ok, same applies. My I see your restoration later.
Hi Angelo... I love this kind of work. I've done restoration for an art gallery and for friends for many years now... but I've only recently started on religious sculptures... I would so like to learn from you. For example... what kind of paint did they use on the plaster? I would like to use as close to original as I can find?
I use plaster of paris with the addition a small amount of plaster/joint compound (dry wall compound) any brand will work. Experiment on your own, make plaster shape let dry for a few weeks, then break it, try to repair.
@Angelo Puccia Hi, I'm about to repair an outdoor statue left to the mercy of the elements. Usually I use plaster and water with a bit of pva mixed in for indoor statues. What would you suggest as a hard wearing compound? Any special sealers or paints, etc? Thanks!
Hi. What are you using for filling of cracks and the hand....is it a plaster product? I am helping a friend and need to lightly scrape off chips of paint and after sanding find in the negative space so the surfaces are flush. Any advice would be greatly appreciated.
SS will not rust. I insert wire into small holes which I drill into each broken finger so attachment of new formation of fingers to hold onto. Using gauze and plaster needs to dry on wires then shape/sculpt new fingers.
Thank you for your video post. It’s not exactly what I’m working on but it helps in steps I think I will need to use. A big cross that was handmade when my parents were married... it cracked in the arm and cross but it’s attached still by the wire. I think I am most scared about the coloring and having it match since it’s old and it not colorful so having the aged white color is going to be really hard. If you have any suggestions and have a second to reply, I am open to suggestions. Thank you in advance!
Matching color, especially aged, is trial and error. If you have an area on the back of statue you can test there for color matching. If not I would make sample plaster test patches on cloth or burlap, let dry thoroughly. Make several to test colors and layering. Whites can be tinted with everything from tea to small amounts of acrylic paints. Check youtube on color tinting. If you can email a picture it will give me more of a reference. I hope this helps. Thanks for looking. Good luck.
Thanks, John for your comment and suggestion. I was thinking her question was the sealer of the plaster, which would be Zinsser or shellac. I use carnauba wax on marble sculptures also it gives a beautiful luster.
Sorry, I thought I replied last week. Depending how much plaster you need. I was taught the following: Using a plastic bowl or small cup add about an 1 inch of room temperature water (hot water will accelerate chemical reaction) Add small amount of plaster slowly sifting ( don't want lumps) allowing to settle to bottom of cup, creating a pyramid above water, allow to absorb the water then begin stirring slowly adding more plaster as needed. The setting up will begin slowly then as the heat is generated it will rapidly set up hard. Hope this helps.
Depending on finish and the material used ( oil or acrylic paint) . Always in moderation, I was taught to use for all cleaning is to start with baby shampoo and damp cloth or paper towel. It may take several cleanings. After each application of damp cloth and shampoo use a clean cloth to dry, check to see is any dirt is being lifted from the area just cleaned. If no dirt is on clean cloth it's clean. I may use a "Matte" varnish, optional to finish. Solvents are used for major cleaning which is another matter entirely, needing a test area on the back of statue and more care and caution. Hope this helps. Take your time. Good luck.
Those holes in His palms were made by huge nails as He was crucified on a cross for YOUR eternal salvation, because Jesus loved you before you ever entered your mother's womb. They will be there for all eternity, so your enemy the devil can never say 'Jesus did not love you as the proof is there in His palms forever! Do not mock Jesus please, for His love is more true than anything you will ever find in a human being on earth. He cries out for your love even as you mock the proof we have of The Greatest Love in history, that is The Love Christ Jesus has for you.
+chanteuse617 I am more inclined to mock your overly serious tone. But I will relent and call it a day, and turn my attention to mocking the Latter Day Saints and the Scientologists.
It came to me to tell you, in all seriousness, that instead of spending time mocking that you should believe in yourself and your ideas. You are a bright, intelligent, and creative guy. Believe in your dreams. Dreams are powerful. You and I were once a dream, in the mind of God and here we are tangible evidence of that dream. The power of belief is beyond the scope of imagination. I hope you find God, the author of dreams, and I pray that you believe in the gifts he has given you. I pray that you do not allow fear of others and what they think to keep you in a place of procrastination. I ask God to fill what is empty with Himself, filling up your heart with only the peace He can give. 😊
+chanteuse617 I am amazed by your words, and I thank you for I am a sinner, in dire need of God's grace. As it was in the beginning, is now and ever shall be a world without end. Amen.
With the limited funds that most Churches have, professionals are out of the question. Enthusiasts have to learn to do these jobs to professional standards.
Fortunately, none of the statues need anything currently, but we have other objects that need some tender loving care. Some things we do feel brave enough to tackle, but others frighten us too much to try. I am not about to go pulling out 'proper' stained glass windows. Yet.
I have given instructions by email and phone, a couple in Canada completed 2 statues which came out great. Most of us have a fear of a project until we start small and experience builds our confidence to do the larger statues. I have done a few sample plaster squares, broke, then repaired, some didn't come out well until I was able to control the moisture drying timing and using wire and gauze.
th-cam.com/video/Vw7Q3WQel5w/w-d-xo.html This professional religious restorer is in St. Louis. If not, contact MICA, RISD, SCAD...all professional art schools who should be able to find professional religious statue restorers. This work should not be done by amateurs, as they are professional works of art. She specifically states that amateur fixes should not be attempted. If you are interested in Religious art, perhaps consider making your own original pieces, and donating them to churches, since you are doing this work for free. Or perhaps do as we professional artists do and attend school or apprentice, so that you have the skills needed for this line of art. Good luck.
Ya, that's true. But being Italian we speak with or hands as must as speaking, when alone no one is around to tell to shut up. The time doesn't matter my clients know I work slow and easy. This project took 6 months, working with other statues also. I like your name, Matt Talbot is a singer orf Christian music.
Beautiful job! Well done!
Thank you very much!
Nice work, Angelo! We always enjoy watching others work on statues with patience and passion! Well done!
Hi
Thank you for sharing. The gauze layer on the fingers is a great idea and I'm going to use that on my next project.
Hi nice work, I usually make mold of hands when finished, as it's the most common brake, then you can replace the hands as the same figure comes in. Saves lot of work.
Hi!! I need to repair a baby Jesus. Could you tell me what you use to make the mold of the hands please.
Your statue repairs are fantastic. The statues, especially Sacred Heart, are beautiful. Tell me, how in the heck did they get broken so severely? Wow.
Please tell me what plaster you're using to repair those hands. Is it just regular plaster? Or is it mixed with a bonding or strengthening agent?
Incroyable! Beaucoup de patience...
Thank you.
Thank you the great video and all the inside help for products and preceedures. Your work is wonderful.
It is a pleasure watching your work. You should share more videos of each repair project you do. I am sure you would have a pretty decent following. I have two chalkware statues from the 40's. A clown and a little bagpipe girl that are both 16 inches or so high. Both in very good condition with some small chips here and there.
The purpose for this video was to give steps in restoring plaster statues.
I am an artist, I have restored and sculpting statues for over 40 years. My first sculpting material was marble, taught to carve and to repair work at a monument shop when I was 16 years old. I went on to college studied painting and sculpture, studied with professional artist also attended carving marble/granite in Vermont studios.
I have been asked many times how to restore statuary, this video gives basic information to those who have interest in the process. It is not rocket science, anyone can do it with the understanding of materials, the simple process of armatures used in the original manufacturing.
The best lesson is to find an old statue (doesn't have to be religious) and tear it apart. Deconstruct to build up. Know the process, study how materials dry, inter act with old plaster.
With a little talent and passion you can do the same. You start small repairs and eventually after a few years you will take on larger projects.
I offer all for free to anyone of interest, as this is becoming a lost art.
Angelo Puccia great work my friend 🍻
This is amazing work.
Thank you. I am working on another video to explain more detailed steps.
Thanks for the video. You say, " study how materials dry, inter act with old plaster..." I feel you did not teach us these things- which is the whole point of watching a video. I do not understand all these videos by people who do not tell you what materials they are using or information about the materials. I keep watching video after video, with nothing explained. It is very hard to spend so much time with no answers.
@@cchemmes-seeseeart3948
I appreciate your input. Other viewers have asked this question before and have answered the materials used.
I need to make another post illustrating and showing materials.
Basic materials are:
Plaster of Paris
Joint compound
“Plumbers cement “ it is a fast setting and hard water proof cement. I use this as a base layer to attach any broken or to recreate missing fingers, parts.
I use gauze mixed with cement (as above) to attach to existing armature or any parts that can be drilled and use a steel pin or dowel for strengthen joints. Sculpting the CANCELlayers with plaster
Thanks for sharing your techniques. Beautiful
You welcome. I haven't followed up on this video in awhile. I produced this because many have questioned how to do simple repairs.
I am working on an adder for plaster, mixing and a few other techniques.
Thanks for checking this out.
Very helpful! I'm going to be working on a plaster st anne de boupre. Just minor issues thankfully but I also want to fully paint it. I know filming is hard but do consider doing another video at some point. I think we could a lot from your restorations, and there are not very many people who do this. Again thank you!
Thank you for you comment.
I have worked on several statues during the the past few years. Many were fast turn around time which filming wasn't a priority.
I have video of other basic issues others have requested. Just haven't downloaded, I will try to combine and download.
Thanks again for watching.
What products are u using to build out finger? Plaster of paris? Plaster sheets? Joint compound? Do you use water based paint when u paint it? I presume a primer initially and a clear coat post painting too. Am I correct?
Please stay tuned. I’m producing a new video on another repair. I will show more detail. 😊
@@AngelojPuccia thank you!! Looking forward to the new video!
I have repaired so many things with Ready Patch sold at Home Depot or Benjamin Moore- it can be used on anything and won’t shrink, can be sanded and painted indoor or exterior.
Thanks, I’ll check it out. I’m old school., don’t like spending money when what worked for years why change, 😊
Thank you for your video. I will soon be working on one that has four wire only without any of the piece attached and I'm looking for some tips like you have with the gauze on Blessed Mother's hand. THANK YOU.
Zita, I’m in the process of a new video, with a list of materials I use to repair statuary.
If I can be of any help please contact me.
I use plumber’s cement, with gauze to give a strong bond to wire. Don’t build up thick you want to establish a solid base for the plaster layer to carve. Allow time between layers.
Good Luck
A
What type of plaster did you use?
Hi
I am fixing a plaster statue and can you recommend a glue that I should use to attach the hand to the arm?
Beautiful work sir! One question, do you mix any other product with the plaster or is it straight plaster only? Thank you!
Hi Tim, yes, I first begin with a strong binder of plumbers putty,. Durhams putty is a hydraulic cement which create base coat to secure the plaster parts together, then after putty dries apply plaster to sculpt and finish.
I have found this method the best.
Thank you interest.
Angelo
How can I get this done by a professional
Well done!
What are you using to fill in the cracks, I have an antique chalk ware statue with just cracks and do I use a compound, plaster of Paris? Both?
Hello Angelo, thank you for this video. This helps a lot with a restoration project I am working on. I'd like to ask you for a few details on the painting steps. I've used oil paint but need a sealer or wax to finish it off. What do you suggest?
Perhaps I can email you a picture as well in case you have any comments/ suggestions? Much appreciated!!!
Hi Meghan, yes, on any surface I use either a matt or semi gloss varnish. Always remember to allow any paints to dry thoroughly. Oil paints will take several days or weeks to dry. The paints will crackle if you seal to soon.
Wax is also ok, same applies.
My I see your restoration later.
What do you use for plaster? I am restoring a statue which is missing a finger and need to know what plaster to buy to recreate it. Thanks.
How big is the statue?
24" tall
Hi Angelo... I love this kind of work. I've done restoration for an art gallery and for friends for many years now... but I've only recently started on religious sculptures... I would so like to learn from you. For example... what kind of paint did they use on the plaster? I would like to use as close to original as I can find?
Hymne, I surely do wish he had answered you, I need to know this!
How are you mixing your plaster? Part Plaster & part wall mud? What glue??
Nice video but I do wish people would explain the fill they use and give instructions on what kind of plaster is used.
I use plaster of paris with the addition a small amount of plaster/joint compound (dry wall compound) any brand will work. Experiment on your own, make plaster shape let dry for a few weeks, then break it, try to repair.
@Angelo Puccia Hi, I'm about to repair an outdoor statue left to the mercy of the elements. Usually I use plaster and water with a bit of pva mixed in for indoor statues. What would you suggest as a hard wearing compound? Any special sealers or paints, etc? Thanks!
what is the statue material (plaster)?
epoxy
there are many suppliers
another exterior protection I have used is auto paint and exterior paints.
Hi. What are you using for filling of cracks and the hand....is it a plaster product?
I am helping a friend and need to lightly scrape off chips of paint and after sanding find in the negative space so the surfaces are flush. Any advice would be greatly appreciated.
How the hell did they get this badly damaged.
Sir, what wire did you put into the thumb? Where do you get it.
Mig welding wire, .30. Stainless steel wire will work also. Go to any welding shop ask for scraps they throw it away.
Angelo where do you get the Stainless Steel “tick wire”?
SS will not rust. I insert wire into small holes which I drill into each broken finger so attachment of new formation of fingers to hold onto. Using gauze and plaster needs to dry on wires then shape/sculpt new fingers.
Welding shop, Home Depot, most hardware stores who welding supplies.
Go to a welding business ask for 2 feet of wire, they will give it to you.
Thank you for your video post. It’s not exactly what I’m working on but it helps in steps I think I will need to use. A big cross that was handmade when my parents were married... it cracked in the arm and cross but it’s attached still by the wire. I think I am most scared about the coloring and having it match since it’s old and it not colorful so having the aged white color is going to be really hard. If you have any suggestions and have a second to reply, I am open to suggestions. Thank you in advance!
Matching color, especially aged, is trial and error. If you have an area on the back of statue you can test there for color matching. If not I would make sample plaster test patches on cloth or burlap, let dry thoroughly. Make several to test colors and layering. Whites can be tinted with everything from tea to small amounts of acrylic paints. Check youtube on color tinting. If you can email a picture it will give me more of a reference. I hope this helps. Thanks for looking. Good luck.
She took most of the blows for her son.
Thank you for your demonstration. I am repairing the exact same two statues for our church. You did a wonderful job. What kind of sealer did you use?
Kilz, or any opaque white primer/sealer
Cindy Falterman
I use carnauba wax for finishing job, that's the old way gives lovely finish.
Thanks, John for your comment and suggestion. I was thinking her question was the sealer of the plaster, which would be Zinsser or shellac. I use carnauba wax on marble sculptures also it gives a beautiful luster.
Can you recommend a brand for carnauba wax? I assume it's not the same as for a car. Has anyone tried Renaissance Wax on statues? Thanks!
What kind of paints do you recommend please.
I recently fixed an indoor statue. I used acrylic paint.. but stay away from cheap craft paint,
Do you mix the plaster if so what is the ratio
Sorry, I thought I replied last week.
Depending how much plaster you need. I was taught the following:
Using a plastic bowl or small cup add about an 1 inch of room temperature water (hot water will accelerate chemical reaction)
Add small amount of plaster slowly sifting ( don't want lumps) allowing to settle to bottom of cup, creating a pyramid above water, allow to absorb the water then begin stirring slowly adding more plaster as needed. The setting up will begin slowly then as the heat is generated it will rapidly set up hard. Hope this helps.
What paint is used to infill the color?
Fash n Hues are a water base oil paint, I have used for along time, it's an antiquing process.
How to clean plaster of Paris status?? Plz help
Depending on finish and the material used ( oil or acrylic paint) . Always in moderation, I was taught to use for all cleaning is to start with baby shampoo and damp cloth or paper towel. It may take several cleanings. After each application of damp cloth and shampoo use a clean cloth to dry, check to see is any dirt is being lifted from the area just cleaned. If no dirt is on clean cloth it's clean. I may use a "Matte" varnish, optional to finish. Solvents are used for major cleaning which is another matter entirely, needing a test area on the back of statue and more care and caution. Hope this helps. Take your time. Good luck.
You forgot to spackle the holes in his palms...
Or did you??
Those holes in His palms were made by huge nails as He was crucified on a cross for YOUR eternal salvation, because Jesus loved you before you ever entered your mother's womb. They will be there for all eternity, so your enemy the devil can never say 'Jesus did not love you as the proof is there in His palms forever! Do not mock Jesus please, for His love is more true than anything you will ever find in a human being on earth. He cries out for your love even as you mock the proof we have of The Greatest Love in history, that is The Love Christ Jesus has for you.
+chanteuse617 I am more inclined to mock your overly serious tone. But I will relent and call it a day, and turn my attention to mocking the Latter Day Saints and the Scientologists.
It came to me to tell you, in all seriousness, that instead of spending time mocking that you should believe in yourself and your ideas. You are a bright, intelligent, and creative guy. Believe in your dreams. Dreams are powerful. You and I were once a dream, in the mind of God and here we are tangible evidence of that dream. The power of belief is beyond the scope of imagination. I hope you find God, the author of dreams, and I pray that you believe in the gifts he has given you. I pray that you do not allow fear of others and what they think to keep you in a place of procrastination. I ask God to fill what is empty with Himself, filling up your heart with only the peace He can give. 😊
+chanteuse617 I am amazed by your words, and I thank you for I am a sinner, in dire need of God's grace. As it was in the beginning, is now and ever shall be a world without end. Amen.
José Luiz
Best leave these jobs to professionals,.......
With the limited funds that most Churches have, professionals are out of the question. Enthusiasts have to learn to do these jobs to professional standards.
I agree, find me one.
Fortunately, none of the statues need anything currently, but we have other objects that need some tender loving care. Some things we do feel brave enough to tackle, but others frighten us too much to try. I am not about to go pulling out 'proper' stained glass windows. Yet.
I have given instructions by email and phone, a couple in Canada completed 2 statues which came out great. Most of us have a fear of a project until we start small and experience builds our confidence to do the larger statues. I have done a few sample plaster squares, broke, then repaired, some didn't come out well until I was able to control the moisture drying timing and using wire and gauze.
th-cam.com/video/Vw7Q3WQel5w/w-d-xo.html This professional religious restorer is in St. Louis. If not, contact MICA, RISD, SCAD...all professional art schools who should be able to find professional religious statue restorers. This work should not be done by amateurs, as they are professional works of art. She specifically states that amateur fixes should not be attempted.
If you are interested in Religious art, perhaps consider making your own original pieces, and donating them to churches, since you are doing this work for free. Or perhaps do as we professional artists do and attend school or apprentice, so that you have the skills needed for this line of art. Good luck.
Wish you would do it while you’re talking instead of wasting time
Ya, I know. But forgive me for being an Italian. 😊
you show nothing of how it is doen, insteas long boring repetitve explanations
You would get more done if you didn't talk soo much.
Ya, that's true. But being Italian we speak with or hands as must as speaking, when alone no one is around to tell to shut up.
The time doesn't matter my clients know I work slow and easy. This project took 6 months, working with other statues also.
I like your name, Matt Talbot is a singer orf Christian music.
Idolatry
Idiocy