Sensors and Valves on 1.9 cdti - JTDm, TID, JTD - z19dth z19dt z19dtl

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ธ.ค. 2015
  • Support the channel making a donation at www.paypal.me/kaliope

ความคิดเห็น • 29

  • @n140ethan
    @n140ethan 3 ปีที่แล้ว +7

    Timestamps:
    0:07 - MAP Sensor / Boost Sensor
    0:28 - Crankshaft Sensor
    1:03 - Engine Temperature Sensor
    1:24 - Oil Pressure Warning Light Switch
    1:47 - Camshaft Sensor
    2:41 - Minimum Oil Level Sensor
    3:33 - Fuel Rail Pressure Sensor & Fuel Pressure Regulation Solenoid Valve
    4:05 - Vacuum and Turbocharger Sensor
    4:27 - Fuel Metering Solenoid Valve
    4:48 - EGR Valve

  • @leonhill6800
    @leonhill6800 3 ปีที่แล้ว +4

    This was/is a very handy video . It helped me no end. :-)

  • @sergeybubley7928
    @sergeybubley7928 3 ปีที่แล้ว

    Thanks man, could not find wtf is that, thanks to you now I know ( minimum oil level sensor )

  • @Zero_trust
    @Zero_trust 6 ปีที่แล้ว

    thanks
    😊 makes locating simple and w/ part # too. cheers

  • @prendedaj22
    @prendedaj22 5 ปีที่แล้ว

    Thank you for making this video

  • @misiekvuychik3768
    @misiekvuychik3768 4 ปีที่แล้ว +2

    Great video. Thanks

  • @Miok0
    @Miok0 4 ปีที่แล้ว +1

    Thank you so much! ♡♡

  • @mariusmarius9977
    @mariusmarius9977 3 ปีที่แล้ว +2

    Nice , thx for tips.

  • @d.h.2145
    @d.h.2145 8 หลายเดือนก่อน

    Thank you!

  • @xitbabylonow1102
    @xitbabylonow1102 5 ปีที่แล้ว

    Thanks!

  • @marcass100
    @marcass100 6 ปีที่แล้ว

    Does a fuel pressure regulating valve on a rail has to click when I apply 12 volt? I tried two and none of them clicked/closed/opened.

  • @tomasrais1808
    @tomasrais1808 3 ปีที่แล้ว +1

    You forgot DPFE sensor. My z19dth has it behind EGR valve on wall. Or like under right windscreen wiper but in the engine bay. (not on engine)

  • @derbyrappersdelight3751
    @derbyrappersdelight3751 3 ปีที่แล้ว

    Hi, by any chance do you have a video on crankshaft replacement?

  • @therb6365
    @therb6365 3 ปีที่แล้ว +4

    PCV Valve?

  • @DiggingNorway
    @DiggingNorway 2 ปีที่แล้ว

    Crankcase breather?

  • @DorianStar
    @DorianStar 4 ปีที่แล้ว

    Hello there! I have just one question about z19dt engine... Can I use diesel injectors with end number 165 from Opel to my Alfa originally with end number 276? Both cars are 120hp, both cars are with the same z19dt engine, thanks!

  • @kanabek6104
    @kanabek6104 2 ปีที่แล้ว

    Hi, thanks a lot for videos. Could you help me with my problem about code C0050-06 Rear Right Wheel Speed Sensor Circuit Open or Low Voltage. Engine won't start. I've checked rear wheel abs cable. I think problem is with abs cable in engine side. But I don't know where should I search?

    • @fixanddrive
      @fixanddrive  2 ปีที่แล้ว

      I don't think the engine would not start after a faulty ABS loom.

  • @DiggingNorway
    @DiggingNorway 2 ปีที่แล้ว +1

    PCV valve?

  • @kingsize6441
    @kingsize6441 4 ปีที่แล้ว +1

    Fuel temperature sensor?

    • @ai1.0
      @ai1.0 4 ปีที่แล้ว

      Does it exist on z19dt?

  • @krzychupop
    @krzychupop 8 ปีที่แล้ว +2

    szkoda ze po polsku nie ma filmiku

  • @waynewatson5437
    @waynewatson5437 2 ปีที่แล้ว

    Hello pal great videos, how difficult would it be to swap a Astra H CDTI Z1.9 DT engine to Astra H CDTI Z1.9 DTH engine???

    • @fixanddrive
      @fixanddrive  2 ปีที่แล้ว

      Don't know but why would you do that? DT is more reliable. I never wanted DTH

    • @waynewatson5437
      @waynewatson5437 2 ปีที่แล้ว

      @@fixanddrive The DT engine is making a knocking noise at the moment. I have a another car with the DTH engine. I thought I would try a engine swop if possible.

    • @jokerash
      @jokerash ปีที่แล้ว

      you need the DTH ECU, the full engine wiring loom (DTH has more sensors and in different locations) and you need to compare the connectivity between the engine wiring loom and the other components of the car and wire them accordingly, then you need to code the ECU to the car via Tech2/MDI

  • @finders829
    @finders829 3 ปีที่แล้ว

    When i press acceleration, fuel consumption shows less when i release pedal. On released pedal it shows 50L. Is there any problem of any sensor? Thanks man.

  • @ralgor100
    @ralgor100 4 ปีที่แล้ว

    what a fuck of an engine to work on

  • @juripodgornoi8556
    @juripodgornoi8556 4 ปีที่แล้ว

    Thanks!!!